aboutsummaryrefslogtreecommitdiff
path: root/doc/openocd.texi
AgeCommit message (Collapse)Author
2015-03-25doc: update RTOS section, add 'mqx' infoMarian Cingel
Change-Id: I20b93d49d275e6daaf5e39c49b4508c70c6fc56f Signed-off-by: Marian Cingel <cingel.marian@gmail.com> Reviewed-on: http://openocd.zylin.com/2592 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25transport: make 'transport select' auto-select the first available transport ↵Angus Gratton
if not set This should allow most of the existing configurations for older versions to remain compatible without forcing the user to change his or her config to explicitly select transport. Also in some circumstances can remove the need to chain a "-c transport select X" when building custom configs on the command line, which seems like a common new user pitfall. Change-Id: Ic87a38c0b9b88e88fb6d106385efce2f39381d3d Suggested-by: Petteri Aimonen <jpa@git.mail.kapsi.fi> Signed-off-by: Angus Gratton <gus@projectgus.com> Reviewed-on: http://openocd.zylin.com/2551 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25armv7m_trace, stlink: provide APIs to capture trace with an adapterPaul Fertser
Change-Id: I9d193dd5af382912e4fe838bd4f612cffd11b295 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2540 Tested-by: jenkins
2015-03-25armv7m: add generic trace support (TPIU, ITM, etc.)Paul Fertser
This provides support for various trace-related subsystems in a generic and expandable way. Change-Id: I3a27fa7b8cfb111753088bb8c3d760dd12d1395f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2538 Tested-by: jenkins
2015-03-09flash/nor/stellaris: allow to recover a locked device that can't be examinedPaul Fertser
Change-Id: I28536184053e2d1ba906620e728f7fad6ba39f0a Reported-by: Ed Beroset <beroset@mindspring.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2552 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Ed Beroset <beroset@ieee.org>
2015-03-09server: tcl_notifications commandAustin Morton
Implements async target notifications to the tcl server Change-Id: I4d83e9fa209e95426c440030597f99e9f0c3b260 Signed-off-by: Austin Morton <austinpmorton@gmail.com> Reviewed-on: http://openocd.zylin.com/2336 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-09lpc2000: Add LPC407x/8x flash size auto detectionNemui Trinomius
This patch adds auto flash size detection for LPC407x/8x series. Tested on below listed chips. LPC4088 LPC1788(regression test) Change-Id: I82f62678a04eac9b84658bd6d1cfdf45be64c931 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2555 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Jens Bauer <jens@gpio.dk>
2015-02-22Remove long-deprecated "target count" and "target number" commands.Robert P. J. Day
Given that the manual states that these two subcommands are deprecated and were scheduled to be removed back in 2010, remove them and the corresponding documentation from the manual. Change-Id: Iaac633349d7fcb8b7f964109c7d26dd0cc5fc233 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1860 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-12doc: stellaris driver supports Tiva C tooPaul Fertser
Change-Id: I3b77bf0617c0bbba85cfd678adece57aa7d03e32 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2509 Tested-by: jenkins
2015-02-12README, doc: add mrvlqspi flash driver informationPaul Fertser
Change-Id: I7a270cdaf3d9119aa75285a8d1e063c2fe2a31b7 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2510 Tested-by: jenkins
2015-02-12doc, README: mention all the variants supported by lpc2000 driverPaul Fertser
Change-Id: I66f9a201426a68fc1314ab7f02b27e36dcab33ba Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2508 Tested-by: jenkins
2015-02-11flash/startup: extend "program" command to accept "exit"Paul Fertser
This optional argument tells OpenOCD to exit after finishing (either succesfully, or with an error) the programming sequence. Without it OpenOCD stays running. Change-Id: I6ecaf33ff985eea9a9cd02ff644a74403ae3e1e5 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2492 Tested-by: jenkins Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-11sim3x: new flash driver for Silabs SiM3 microcontroller familyAndreas Bomholtz
This is a new driver for Silicon Laboratories SiM3 microcontroller family, based on the work of Ladislav Bábel. The driver will try to detect the type of MCU from the device id register, and if this fails it will use the flash size from the flash bank command. Driver added to the documentation and to the README. TCL script added. Tests: * Hardware: SiM3C166 (pre-production) and SiM3U167 * Binary: 4kb, 197kb, 256kb * Flash protect not tested Change-Id: I701e0cf505ca8ad99be7f83543fe5055b2f65dcc Signed-off-by: Andreas Bomholtz <andreas@seluxit.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2078 Tested-by: jenkins
2015-02-11J-Link serial number config optionJoerg Fischer
Add serial option to jlink config commands, handy when there is more than one adapter connected. To select adapter 0123456 for OpenOCD, use jlink serial 0123456 Change-Id: Ib29ce3f0c4975e1169211721a4531bf4db61f1ee Signed-off-by: Joerg Fischer <turboj@gmx.de> Reviewed-on: http://openocd.zylin.com/2521 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11doc: document the OCL (on chip flash loader) driverPaul Fertser
Change-Id: I8afe870c7a16b04473f4822c2df9a7607f0480e7 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2529 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-11psoc4: support for Cypress PSoC 41xx/42xx familyTomas Vanek
New NOR flash driver was derived from stm32lx. Procedure ocd_process_reset_inner is overriden in psoc4.cfg to handle reset halt and system ROM peculiarities. Change-Id: Ib835324412d106ad749e1351a8e18e6be34ca500 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2282 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-04flash/nor/stm32lx: use 0 base to autodetect second bank locationPaul Fertser
Change-Id: I3c296b3e276fcd4d92e4180fc0d2133eebfcc240 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2503 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-04doc: add stm32lx mass_erase descriptionPaul Fertser
Change-Id: Ibe26f40a105dfabcf336ae12fcdc72f4e87513b6 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2502 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15docs: update bug tracker URLSpencer Oliver
Change-Id: I6a362020a29ccb9222f7909b5b34e5c35a02ed4b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2454 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-11-24doc: flash: write_image writes only loadable sectionsAlexei Colin
The code that takes only sections marked PT_LOAD is in image_elf_read_headers in src/target/image.c (Just trying to save some time for the next person with same question.) Change-Id: I493c102c908fca2b7238276ddbbecbe8c7cd9a0a Signed-off-by: Alexei Colin <ac@alexeicolin.com> Reviewed-on: http://openocd.zylin.com/2348 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-16cmsis-dap: add serial number supportSpencer Oliver
Change-Id: I66926d1013e2b3a43ce0d18d3599771428706b6a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2329 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-10-06hla: add a way to pass arbitrary commands from user to layout and use for ICDIPaul Fertser
TI's ICDI adapter supports some additional commands which a user might want to run for debugging or other purposes, the most useful of them being "debug unlock" that fully mass-erases the device and unprotects the flash. Change-Id: I26990e736094367f92106fa891e9bb8fb0382efb Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2263 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-06at91samd: fix protect, add EEPROM and boot commandsAndrey Yurovsky
There were two problems with the _protect() feature: 1. The address written was off by a factor of two because the address register takes 16-bit rather than 8-bit addresses. As a result the wrong sectors were (un)protected with the protect command. This has been fixed. 2. The protection settings issued via the lock or unlock region commands don't persist after reset. Making them persist requires modifying the LOCK bits in the User Row using the infrastructure described below. The Atmel SAMD2x MCUs provide a User Row (the size of which is one page). This contains a few settings that users may wish to modify from the debugger, especially during production. This change adds commands to inspect and set: - EEPROM size, the size in bytes of the emulated EEPROM region of the Flash. - Bootloader size, the size in bytes of the protected "boot" section of the Flash. This is done by a careful read-modify-write of the special User Row page, avoiding erasing when possible and disallowing the changing of documented reserved bits. The Atmel SAMD20 datasheet was used for bit positions and descriptions, size tables, etc. and testing was done on a SAMD20 Xplained Pro board. It's technically possible to store arbitrary user data (ex: serial numbers, MAC addresses, etc) in the remaining portion of the User Row page (that is, beyond the first 64 bits of it). The infrastructure used by the eeprom and bootloader commands can be used to access this as well, and this seems safer than exposing the User Row as a normal Flash sector that openocd understands due to the delicate nature of some of the data stored there. Change-Id: I29ca1bdbdc7884bc0ba0ad18af1b6bab78c7ad38 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/2326 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-06at91samd: add erase/secure commands, minor fixAndrey Yurovsky
Reference code for the SAMD2x disables caching in the NVM controller when issuing NVM commands. Let's do this as well to be consistent and safer. Add a "chip-erase" for the Atmel SAMD targets that issues a complete Chip Erase via the Device Service Unit (DSU). This can be used to "unlock" or otherwise unbrick a chip that can't be halted or inspected, allowing the user to reflash with new firmware. Add a "set-security" command which issues an SSB. Once that's done and the device is power-cycled, the flash cannot be written to until a "chip-erase" is issued. The chip-erase cannot be issued by openocd at this time because the device will not respond to a request for the DAP IDCODE. Change-Id: I80122f0bbf7e3aedffe052c1e77d69dc2dba25ed Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/2239 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-29doc/openocd.texi: add SWD to the transports supported by jlinkPaul Fertser
Since 67332532194b16b99f0535a41b4179ca5df349b0 jlink adapter driver supports SWD in addition to JTAG. Change-Id: I9376aa02d9281f3e2734d8f127cd42162633d95b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2324 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-22target: Remove "-variant" argumentAndreas Fritiofson
Remove this underutilized feature. Despite the fact that a lot of configs specifies a arbitrary "variant", only the xscale target actually defines any. In the case of xscale, the use of -variant is dubious since 1) it's used as a redundant irlen specifier, 2) it carries a comment that it doesn't really need it and 3) only two xscale configs even specify it. If there's a future target that needs a variant set, a target specific option could be added when needed. Change-Id: I1ba25a946f0d80872cbd96ddcc48f92695c4ae20 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2283 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-22Support hla_serial command for ST-LINK adapters.Austin Phillips
The hla_serial command allows for a programming device serial number to be specified in addition to USB VID/PID. This allows for multiple ST-LINK/V2 programmers to be attached to a single machine and operated using openocd. Change-Id: I350654bf676eb26ba3a90450acfa55d2a5d2d791 Signed-off-by: Austin Phillips <austin_phillips@hotmail.com> Reviewed-on: http://openocd.zylin.com/2198 Tested-by: jenkins Reviewed-by: Martin Glunz <mg@wunderkis.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-28jtag/drivers/ftdi: add option to declare signal aliasesPaul Fertser
This adds -alias|-nalias options to ftdi_layout_signal command that allow to declare a new signal based on an already defined one. Change-Id: I552578ebcd12ae21957a1c0d3b7e878adeff6df0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2181 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01Flash/LPC2000: Add support for auto-probing flash sizeCosmin Gorgovan
Adds support for auto-probing on devices which support the IAP Read Part ID command. Includes IDs for all LPC17XX, LPC13XX, LPC11XX and LPC11XXX devices with publicly available user manuals. To use auto-probing, select the 'auto' lpc2000 variant. Change-Id: Ic617c32925c9ebe0e9d9192ed8ddbfa08e9f0aaa Signed-off-by: Cosmin Gorgovan <cosmin@linux-geek.org> Reviewed-on: http://openocd.zylin.com/2075 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-01Flash/LPC2000: Add support for LPC11(x)xx, LPC13xxCosmin Gorgovan
LPC11(x)xx and LPC13xx devices are mostly compatible with the lpc1700 variant of the LPC2000 driver, but use a fixed flash sector size of 4KB. Change-Id: I033515f4ff6bc61d3b9babd27096f78c99cea927 Signed-off-by: Cosmin Gorgovan <cosmin@linux-geek.org> Reviewed-on: http://openocd.zylin.com/2071 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-05-05doc: document [start end] parameters of "profile" commandPaul Fertser
Change-Id: I56561b08304e5b854a67b06ab6b9cee7a24919b2 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2115 Tested-by: jenkins
2014-03-29tcl: introduce init_target_events and use it for gdb flashing eventsPaul Fertser
This introduces a new global Tcl procedure that is run just after init_targets and before init_boards. Its default behaviour is to assign gdb-flash-erase-start and gdb-flash-write-end to reasonable defaults. The rationale for doing "reset init" before gdb erases and flashes memory is that all flash drivers are written in assumption that they can safely be used only after chip reset (plus chip-specific configuration in the init handler if any). The need to use "reset halt" after flashing is because a user expects running firmware after loading to be the same as running it from power-on-reset. Change-Id: I9ddc4047611904ca4ca779b73376d2739611948a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2062 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17openocd.texi: document Tcl RPC and add an example clientPaul Fertser
This should provide enough information to start using OpenOCD RPC. I've seen some other example clients in different languages but I can't find them anymore, and their legal status was unclear. Change-Id: I3a95fe361d773040d1e52a62f9cc0cc655019a9f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1915 Tested-by: jenkins Reviewed-by: Andreas Ortmann <ortmann@finf.uni-hannover.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-07Rename and sort udev rules fileAndreas Fritiofson
Also add missing entries for JTAG-lock-pick Tiny 2, Xverve Signalyzer LITE and default FTDI VID:PIDs. Change-Id: I41b4f15409642298d1cf134d1f8014dc8f003005 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1969 Tested-by: jenkins
2014-02-24nrf51: Implement the support for Nordic's nRF51 devicesAndrey Smirnov
Add support for Nordic's nRF51 chip series. Tested with nRF51822. Change-Id: Id70f6fd76888cc595a353aefb84d25c4cd325d7d Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/1945 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-11quark_x10xx: add new target quark_x10xxAdrian Burns
Intel Quark X10xx SoC debug support added Lakemont version 1 (LMT1) is the x86 core in Quark X10xx SoC Generic x86 32-bit code is in x86_32_common.c/h Change-Id: If2bf77275cd0277a82558cd9895b4c66155cf368 Signed-off-by: adrian.burns@intel.com Reviewed-on: http://openocd.zylin.com/1829 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-04doc: add missing reg command argument 'force'Spencer Oliver
The argument 'force' enables a user to bypass the internal cache and read a target register directly. However it is missing from the user guide. Change-Id: I26f689eec20b38a0dc5294626b25df566b554446 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1897 Tested-by: jenkins
2014-02-04doc: update CMSIS-DAP info to match default driver behaviourSpencer Oliver
By default the driver will now auto detect attached adapters, it does not use an internal list any more. Update docs to match this. Change-Id: I62a9d243cd236a8cf54cbd9d088c4837a8df31bf Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1902 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-01-20doc: Add Gerrit to the Developer resources sectionAndreas Fritiofson
Change-Id: Icbf2050967cea06b05a09574a6a91ce1407a489f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1885 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-15Grammatical cleanup to Tcl Scripting chapter of User's GuideRobert P. J. Day
Changes solely to the Tcl Scripting API chapter of the UG: * Some grammatical cleanup * Fix formatting issues (@example and @verbatim formatting) * Add references to missing OSes OpenBSD, NetBSD and eCos. Change-Id: I3ec1a192a0b1e0a207dceb76fd39008d01e287a5 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1872 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11A few more grammar and typo fixes from the User's Guide.Robert P. J. Day
More cleanup from some of the later chapters from the User's Guide, no functional changes. Change-Id: Ib2860fc2574503e8107935d79db45fa96014fe3a Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1863 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11Remove obsolete tip referring to 2010 removal of TAP numbers.Robert P. J. Day
Remove a tip describing the discouraged use of TAP numbers, and how these numbers would be removed by mid-2010. Change-Id: Iebe7e2e4a0f8e1f18a91d7935588dd9ced2b398d Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1862 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11Proofreading, typo and grammar fixes to Ch 10 User's Guide.Robert P. J. Day
Various cleanups to Chapter 10 of the User's Guide, no functional changes. Change-Id: I055d032eacc8e85b1d8edbd4bcc505f6f0feaa49 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1861 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09cmsis-dap: add initial cmsis-dap supportSpencer Oliver
This is based on work from: https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap Main changes include moving over to using HIDAPI rather than libusb-1.0 and cleaning up to merge into master. Support for reset using srst has also been added. It has been tested on all the mbed boards as well as the Freedom board from Freescale. These boards only implement SWD mode, however JTAG mode has been tested with a Keil ULINK2 and a stm32 target - but requires a lot more work. Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1542 Tested-by: jenkins
2014-01-08tools: add firmware recovery helpersPaul Fertser
This adds a set of helper functions with the aim to make it possible to flash mass-market devices without RTFMing altogether (i.e. to obsolete GPL-violating proprietary tjtag and other similar software). Real-life tested on an RT-N16 and WRT54GL. Change-Id: I197a9b28a5f386803f081057c4b4ebf2f9c447b1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1850 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08Numerous pedantic fixes to the User's Guide, including typo fixes,Robert P. J. Day
grammar fixes and so on. Change-Id: Iaeb603447ecd9f77f1d49ce77044431442f4f219 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1855 Reviewed-by: Bill Traynor <btraynor@gmail.com> Tested-by: jenkins Reviewed-by: Francois Lorrain <francois.lorrain@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22stlink: remove stlink_api commandMathias K
Remove stlink_api command. Change-Id: I8f7885d3756fec462f9ebbee2ed285a98a51366c Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1760 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14topic: Support for the Xilinx BSCAN_* Virtual JTAG in OpenriscSergio Chico
This add support to the Xilinx BSCAN_* virtual JTAG interface. This is the Xilinx equivalent of the Altera sld_virtual_jtag interface, it allows a user to connect to the debug unit through the main FPGA JTAG connection. Change-Id: Ia438e910650cff9cbc8f810b719fc1d5de5a8188 Signed-off-by: Sergio Chico <sergio.chico@gmail.com> Reviewed-on: http://openocd.zylin.com/1806 Tested-by: jenkins Reviewed-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-29hla/stlink: Re-order trace parameters to allow trace output file to be optionalJames G. Smith
Re-order the "trace" parameters to allow the raw capture (log) file to be an optional feature. The clock frequency for calculating the "Async Clock Prescalar" is always required when enabling trace processing and is now the first "required" parameter. The ST-Link driver is updated to use the (required parameter) "trace_source_hz" non-zero value as the indicator of trace being required, rather than the now optional output file descriptor being non-NULL. Background: This patch is groundwork for extending the OpenOCD SWO capture to implement other (OpenOCD built-in) ITM/DWT processing where the core trace support is required, but there is no requirement to store raw trace data to a configured host file. By itself this patch is almost a functional NOP, since without the other processing in place there is no reason NOT to specify a capture file. Change-Id: Ibc385dd0a7adaf9bd652bceded27262fef35fd59 Signed-off-by: James G. Smith <jsmith@ecoscentric.com> Reviewed-on: http://openocd.zylin.com/1660 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-29tcl: add memory testing functions for board diagnosticsPaul Fertser
This is a tcl implementation of public domain tests by Michael Barr, http://www.barrgroup.com/Embedded-Systems/How-To/Memory-Test-Suite-C The initial porting is done by Shane Volpe and posted to the mailing list: http://www.mail-archive.com/openocd-development@lists.berlios.de/msg16676.html This patch includes some cosmetic amendments plus hardcodes 32bit word size (as the code depends on memread32/memwrite32 anyway) which fixes original code's issue of testing only the first quarter of the specified nBytes. Change-Id: I5f3a66f1f16fc4082c7a5a6aba338430646ed21c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1455 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 04:22:20 +0000