aboutsummaryrefslogtreecommitdiff
path: root/contrib
AgeCommit message (Collapse)Author
2013-04-02Added support for ARMv7-M in arm io.Henrik Nilsson
Added support for ARMv7-M targets in arm_nandwrite and arm_nandread. Change-Id: Iab1d78d401f735e191c6a8519f3619035a300fae Signed-off-by: Henrik Nilsson <henrik.nilsson@bytequest.se> Reviewed-on: http://openocd.zylin.com/1188 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-01-14flash: EFM32 flash implementationRoman D
Limited (no page unprotect, no block writes) implementation of EFM32 flash support. Verified with EFM32 development kit and STLink V2 adapter using SWD. Change-Id: I3db2054d9aa628a1fe4814430425db3c9959c71c Signed-off-by: Roman D <me@iamroman.org> Reviewed-on: http://openocd.zylin.com/1106 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-12-23icdi: add TI icdi interfaceSpencer Oliver
This is the new proprietary interface replacing the older FTDI based adapters. It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad. Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/922 Tested-by: jenkins
2012-09-26Added SPIFI flash driver, algorithms, and docsGeorge Harris
Added a flash driver designed to allow program/erase of memory-mapped SPI flash chips for LPC43xx/LPC18xx family micros. This driver includes three algorithms - erase, write, and SPIFI peripheral initialization (to allow memory-mapped access after a reset). The driver has been added to the flash driver table (drivers.c), and the OpenOCD documentation has been updated to include the flash driver configuration command. Change-Id: I79f4ff8f1f07de4e5f2fe4f8c23aeb903f868514 Signed-off-by: George Harris <george@luminairecoffee.com> Reviewed-on: http://openocd.zylin.com/783 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30flash: don't write to FLASH_CR in stm32x_write_blockAndreas Fritiofson
It's unnecessary and prevents reusing this function to fix option byte writes. Also try to disable flash writing after an error. Change-Id: Ib5a7b768a1523e6b8da1555126fef4c1e60ab083 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/479 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-19contrib: enable cortex-m0 and cortex-m4 libdcc supportSpencer Oliver
Change-Id: Ib8ff645d1e5b8baca02de8ea95b629d88b203969 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/644 Tested-by: jenkins
2012-05-14jtag: add opendous and estick supportSpencer Oliver
Change-Id: I49c25d226f05fdcaca6cbfc35c2ab47e8464abec Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/611 Tested-by: jenkins
2012-05-14build: add missing erase_check loader srcSpencer Oliver
Change-Id: I1534c1ea1606fda9eb6ffa6a11a708f8c8a3d46a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/605 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-14armv7m: update crc/erase_check loaders for cortex-m0Spencer Oliver
Use loaders that have been built for cortex-m0, making them usable for both cortex-m0 and cortex-m3 families. Change-Id: Ifd82be87eaec2cb96464290c80800cec3630d619 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/604 Tested-by: jenkins
2012-05-11contrib: fix Neo1973 udev permission typoSpencer Oliver
Change-Id: I6d5ad0cc28e0cb52104ead9e974b8b1ed92d9cdc Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/636 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-10contrib/openocd.udev: fix warningAntonio Borneo
Fix following warning message logged by udev at start udevd[421]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/95-openocd.rules:81 Change-Id: I6de935c13a3327e3d718c110f97d19b9847ceca5 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/552 Tested-by: jenkins Reviewed-by: Luca Bruno Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-26flash: add stm32f2x async flash loaderSpencer Oliver
This enable the stm32f2x flash driver to use the asynchronous algorithm support. Speed increase is as follows: before - wrote 1048576 bytes from file stm32f4x.bin in 30.453804s (33.625 KiB/s) after - wrote 1048576 bytes from file stm32f4x.bin in 23.679497s (43.244 KiB/s) This also fixes a bug that was in the old flash loader. The old loader waited while bit16 of the status reg was 0, the new loader waits until this bit is 0 as stated in the flash spec. Bizarrely this bug did not effect programming on any tested parts. Change-Id: I3efc94d42cbe81283673a8f4203700638080af6e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/460 Tested-by: jenkins
2012-02-26flash: add stellaris async flash loaderSpencer Oliver
This enable the Stellaris flash driver to use the asynchronous algorithm support. Speed increase is as follows: before - wrote 65536 bytes from file test.bin in 5.486040s (11.666 KiB/s) after - wrote 65536 bytes from file test.bin in 2.274001s (28.144 KiB/s) Change-Id: I9004c9aadffa1ae3b0cbf908e6549b5b1f794508 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/403 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-01-30stm32f1x: fix bug in flash loader and restrict instruction set to armv6-mAndreas Fritiofson
Correct the offset to the read pointer when clearing it on error. Also restrict the instruction set to armv6-m so the flash driver can be used on Cortex-M0 parts with the same flash controller. Change-Id: I380f9dabcc41fb6e4d43a7e02f355e2381913f39 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/399 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-09contrib: add stlink udev rulesSpencer Oliver
Change-Id: I3f11de8abfaf8821311a7aa0fd237006de3c2792 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/333 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2011-12-23Olimex-ARM-USB-OCD-H: Add udev ruleUlf Samuelsson
Change-Id: Ifc9a1f7fa9445e05560c335b5bba3a33caeccc51 Signed-off-by: Ulf Samuelsson <ulf@emagii.com> Reviewed-on: http://openocd.zylin.com/288 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-17contrib: stm32f2x use std naming rulesSpencer Oliver
Change-Id: I109297aa480b3474f1251571cb8e1a0baa1442fd Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/195 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-11-09contrib: Add udev rules for TI xds100v2 debuggerKyle Manna
This corrects permissions on the FTDI chip on the xds100v2 debugger enabling normal users to access it. Change-Id: I0f6618692ebdee6284eee28f9e612e68782c4d78 Signed-off-by: Kyle Manna <kyle.manna@fuel7.com> Reviewed-on: http://openocd.zylin.com/188 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-08flash: update luminary device tableSpencer Oliver
add support for checking target against the device CLASS rather then just the PARTNO. This change also adds the new LM4F family (Blizzard). Change-Id: Ia9d1e33f1f1c2817c0039a2232ecf932fae072f9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/161 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-13Add an interface file for DLP Design DLP-USB1232H.Uwe Hermann
The DLP Design DLP-USB1232H UART/SPI/JTAG module is based on an FTDI FT2232H chip. Among other things, it can used as JTAG programmer if connected to the JTAG target properly. I have successfully wired the module to an Olimex STM32-H103 eval board and flashed a firmware onto that using OpenOCD. The setup details and schematics are documented at: http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter Change-Id: I5eb9255a61eeece233009bee77d7dc3b5d1afb8b Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/20 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-11contrib: remove extra lfSpencer Oliver
Change-Id: I6e16010e13ad2ea0cdff99b2e8805c74bcd0eb56 Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-10-09stm32f1x: use async algorithm in flash programming routineAndreas Fritiofson
Let the target algorithm be running in the background and buffer data continuously through a FIFO. This reduces or removes the effect of latency because only a very small number of queue executions needs to be done per buffer fill. Previously, the many repeated target state changes, register accesses (really inefficient) and algorithm uploads caused the flash programming to be latency bound in many cases. Now it should scale better with increased throughput. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-10-08Add udev rules for openmoko neo1973 debug boardEugeniy Meshcheryakov
2011-10-03STM32L: Added flash driver and targetClément Burin des Roziers
Added the flash driver for the STM32L family, which highly differ from the STM32F family. Added the TCL target file for JTAG access.
2011-09-16contrib: fix udev rules for tty based adaptorsLuca Bruno
Most serial adaptors are identified by udev with SUBSYSTEM=tty and without DEVTYPE. This patch fix udev rules to work with any listed tty-based adaptor. It has been tested with a FTDI-based Bus Pirate. Signed-off-by: Luca Bruno <lucab@debian.org>
2011-02-04stm32x: add support for STM32F20xØyvind Harboe
ready for wider testing and comments on basic erase + programming. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-19stellaris: automatically generate and update device IDsEric Wetzel
Added a Perl script to contrib that uses the header files in StellarisWare complete Firmware Development Package provided by TI/Luminary to generate a new list of device IDs Used Perl script and revision 6734 of TI/Luminary StellarisWare to update device IDs
2011-01-09present CM3 Trace agendaDavid Brownell
2011-01-06loader: update loader src for armv7-m archSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-06Add the contrib file for the armv7m archJonathan Dumaresq
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
2010-12-23stm32: add dual flash bank supportSpencer Oliver
This patch adds the initial dual flash bank support for devices such as the stm32xl family. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-23contrib: change stm32 flash loader extensionSpencer Oliver
As the stm32 flash loader now uses the preprocessor change extension so that it used by default. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-18Add support for Hilscher netX controllersMichael Trensch
2010-12-10contrib: add source to the cfi flash loadersSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-10contrib: make sure loaders use correct archSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-11-15Add comments and tiny improvements to STM32 flash loader algorithmFreddie Chopin
Add comments to assembly flash loader for STM32. Add tiny improvement in size of the algorithm (40 vs 48 bytes) and tiny speed improvement (~1.5%, as time is wasted on waiting for end of operation anyway). Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2010-10-28contrib: add ram loader src codeSpencer Oliver
Add src code for ram loaders to contrib directory. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-01-05update udev rules for new udev versionJohannes Stezenbach
New versions of udev (148+) emit the following warnings: udevd[425]: BUS= will be removed in a future udev version, please use SUBSYSTEM= to match the event device, or SUBSYSTEMS= to match a parent device, in /lib/udev/rules.d/60-openocd.rules:1 udevd[425]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /lib/udev/rules.d/60-openocd.rules:4 udevd[425]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /lib/udev/rules.d/60-openocd.rules:7 ... See also http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=560141 [dbrownell@users.sourceforge.net: add IDs for Stellaris ICDI, Olimex Tiny-H] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-13Cleanup: nuke trailling whitespacesYauheni Kaliuta
Signed-off-by: Yauheni Kaliuta <y.kaliuta@gmail.com>
2009-07-12Xiaofan Chen <xiaofanc@gmail.com> retire obsolete patch. OpenOCD only ↵oharboe
supports 0.14 and newer and the patch was for 0.14. git-svn-id: svn://svn.berlios.de/openocd/trunk@2511 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-30Uwe Hermann <uwe@hermann-uwe.de>: Make ICEbear look like other targetszwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@1584 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-29Add udev rules for USB ICEbear interface.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@1570 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-28eol-style nativeoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1550 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-24Uwe Hermann <uwe@hermann-uwe.de> Update udev fileoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1522 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-08Patch from Dimitar Dimitrov adding support for Olimex ARM-JTAG-EWduane
git-svn-id: svn://svn.berlios.de/openocd/trunk@1402 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-01-21Add udev rules to contrib. Courtesy of Uwe Hermann <uwe@hermann-uwe.de>v0.1.0kc8apf
git-svn-id: svn://svn.berlios.de/openocd/trunk@1354 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-02Kees Jongenburger <kees.jongenburger@gmail.com> - now compilesoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1201 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-08- remove build warnings from mips_m4k.c and arm11.cntfreak
- reformat whitespace arm11.c[ch] - add missing svn props from mips32_dmaacc.[ch] git-svn-id: svn://svn.berlios.de/openocd/trunk@1032 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-08Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu> libdcc bugfixes + ↵oharboe
trace point function git-svn-id: svn://svn.berlios.de/openocd/trunk@1028 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-02- added info about libftdi support under win32ntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@638 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-02-16 12:13:45 +0000