aboutsummaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2015-11-26Improve J-Link driver and introduce libjaylink.Marc Schink
This patch uses libjaylink which is a library to access J-Link devices. As other tools which are not in the scope of OpenOCD also need to access J-Link devices a library is used. A firmware upgrade tool and an advanced configuration tool for J-Link devices are under development. Further versions of libjaylink will support additional features OpenOCD could benefit from. This includes TCP/IP as additional possibility to connect to J-Link devices as well as power tracing and device internal communication. The latter is used to access peripherals on some development boards (e.g EFM32 STK and DVK). Integration of libjaylink is realized with a git submodule like jimtcl. As libjaylink depends on libusb-1.0 only, no additional dependency is introduced for OpenOCD. All low-level JTAG and SWD implementations of the current driver are left untouched and therefore no incompabilities are to be expected. Improvements of this patch: * Support for more USB Product IDs, including those with the new scheme (0x10xx). The corresponding udev rules are also updated. * Device selection with serial number and USB address. * Adaptive clocking is now correctly implemented and only usable for devices with the corresponding capability. * The target power supply can now be switched without the need for changing configuration and power cycling the device. * Device configuration is more restrictive and only allowed if the required capabilities are available. * Device configuration now shows the changes between the current configuration of the device and the values that will be applied. * Device configuration is verified after it is written to the device exactly as the vendor software does. * Connection registration is now handled properly and checks if the maximum number of connections on a device is reached. This is also necessary for devices which are attached via USB to OpenOCD as some device models also support connections on TCP/IP. * Serial Wire Output (SWO) can now be captured. This feature is not documented by SEGGER however it is completely supported by libjaylink. This patch and libjaylink were tested on Ubuntu 14.04 (i386), Debian 7 (amd64), FreeBSD 10.0 (amd64) and Windows XP SP3 (32-bit) with the following device and target configurations: * JTAG: J-Link v8.0, v9.0 and v9.3 with AT91SAM7S256 * SWD: SiLabs EFM32 STK 3700 (EFM32GG990F1024) * SWD: J-Link v8.0, v9.0 and v9.3 with EFM32GG990F1024 * SWD: XMC 2Go (XMC1100) * SWD: XMC1100 Boot Kit (XMC1100) * SWD: IAR Systems / Olimex Eval Board (LPC1343F) * SWD: Nordic Semiconductor nRF51 Dongle (nRF51422) * SWD: SiLabs EZR32 WSTK 6220A (EZR32WG330FG60G) Except for Windows XP all builds are tested with Clang in addition to GCC. This patch and libjaylink are not tested on OSX yet. Change-Id: I8476c57d37c6091c4b892b183da682c548ca1786 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/2598 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-03Change from sys/poll.h to standard poll.h locationPaul Fertser
According to "man 2 poll" the correct header to include is poll.h, not sys/poll.h. Reported by a build against musl. Change-Id: I5298b49dc947d1a368e423104c0c0c7b9bdd1a10 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2947 Tested-by: jenkins
2015-05-18Restore normal development cyclePaul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2015-05-18The openocd-0.9.0 releasev0.9.0Paul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2015-04-24Restore -dev suffixPaul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2015-04-24The openocd-0.9.0-rc1 release candidatev0.9.0-rc1Paul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2015-02-04configure: define WIN32_LEAN_AND_MEAN early to make it effectivePaul Fertser
This macro makes windows builds faster and helps with the old "#define interface struct" issue as the word "interface" is part of libusb-0.1 API. However, defining it in replacements.h is too late, as windows.h gets included by that time from somewhere else. This solution is provided by Ray Donnelly from the MSYS2 team. Change-Id: I376a5fb3d106786515d7e1ba44dbd751e4dcdb1b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2486 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-16build: make makeinfo optionalSpencer Oliver
This means the user does not have to install texinfo to build OpenOCD. Change-Id: Id9f42da798d3c2b79e95214c9e2559cf32802251 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2325 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-02Provide od+sed replacement for the bin2char helperPaul Fertser
Using custom build-time tools is always more problematic, especially for cross-compiling. This alternative implementation assumes "od" (IEEE Std 1003.1-2001) and sed are available which should be the case for any reasonably modern system. Change-Id: I0208f475648c78e7dca127ff4bab60d314b2bf53 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2139 Tested-by: jenkins Reviewed-by: Fatih Aşıcı <fatih.asici@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-03vsllink: Port to libusb-1.0 APIFatih Aşıcı
Change-Id: I8a9a4dace8e7e8152947094b27b86f9a0d90fa61 Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com> Reviewed-on: http://openocd.zylin.com/1952 Tested-by: jenkins Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-22configure: fix formatting when "echo -n" is not supportedPaul Fertser
The -n option is non-standard and is unavailable on some systems (e.g. OS X's shell builtin). Change-Id: Ia2fed186dee5fa6da543944873d67ebee1d9354e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2172 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-31configure.ac: correct test for USB_BLASTER_DRIVER AM symbolPaul Fertser
Blaster II should depend on the corresponding symbol, not on libusb-1 presence. Change-Id: I3d27a1005a78fe81042cb7b515618604612c3ece Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2159 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-04-27Restore normal development cyclePaul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-27The openocd-0.8.0 releasev0.8.0Paul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-15Restore -dev suffixPaul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-15The openocd-0.8.0-rc2 release candidatev0.8.0-rc2Paul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-04-14configure: presto ftdi driver requires libftdiPaul Fertser
Change-Id: I4b04eec5084d4b8129e2aff8f3411c6d92e84431 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2101 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2014-03-30Restore -dev suffixPaul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-03-30The openocd-0.8.0-rc1 release candidatev0.8.0-rc1Paul Fertser
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2014-03-28ft2232: Mark interface driver as deprecatedAndreas Fritiofson
Change-Id: I5ebc924ab66c86f1902942bebc203a34d97abc64 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1899 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-20jtag/drivers: add USB-Blaster IIFranck Jullien
This patchs adds a new access driver for the existing USB-Blaster interface driver. This interface (as it is build-in on the sockit development board) is composed of a Cypress EZ-USB plus a CPLD. The Cypress chip as an embedded 8051 microcontroller. When it's powered up, the firmware is downloaded to the chip then the device is disconnected and reconnected with the new firmware. The USB-Blaster II protocol is almost identicial to the old one. The only difference is that you need to send a 0x5F before read TDO back. This command seems to copy TDO buffer datas to the endpoint buffer. Driver will be auto enabled if libusb-1.0 is detected. Change-Id: I562a720a68cb4dcabeab791947d5d38776cb70fa Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1791 Tested-by: jenkins Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09cmsis-dap: add initial cmsis-dap supportSpencer Oliver
This is based on work from: https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap Main changes include moving over to using HIDAPI rather than libusb-1.0 and cleaning up to merge into master. Support for reset using srst has also been added. It has been tested on all the mbed boards as well as the Freedom board from Freescale. These boards only implement SWD mode, however JTAG mode has been tested with a Keil ULINK2 and a stm32 target - but requires a lot more work. Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1542 Tested-by: jenkins
2013-12-22build: remove hard coded ftdi and usb librariesMathias K
This patch remove the hardcoded libraries. Also a check for libftdi1 installations was added. This check fix an issue with gentoo and maybe other systems. Change-Id: Ieff9ec4d66ee0f3e6b22261a10e4cab9f26b6b51 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1759 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-21Fix ULINK driver dependencies in configure.acMartin Schmölzer
Commit dd6274deed65c47ba2ef46e14259167d393399d8 (see http://openocd.zylin.com/#/c/1475/ for futher information) adds the wrong libusb dependency for the ULINK driver (libusb-0.1), when in fact the ULINK driver uses the libusb-1.0 API since commit f684252b2530d86f3a8330940105b86c770231f1. Change-Id: I6946f1fdc0e26bfc7bdcff27a721e05a05b464a5 Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at> Reviewed-on: http://openocd.zylin.com/1699 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-26Add new target type: OpenRISCFranck Jullien
Add support for OpenRISC target. This implementation supports the adv_debug_sys debug unit core. The mohor dbg_if is not supported. Support for mohor TAP core and Altera Virtual JTAG core are also provided. Change-Id: I3b1cfab1bbb28e497c4fca6ed1bd3a4362609b72 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1547 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-26Require Autoconf >= 2.64Paul Fertser
m4_argn macro was introduced in v2.63b-34-g46e87de on the 22nd of Apr 2009. Change-Id: Id01cc9f0ffdb46cf6dfd26c3bf3b5efa0ddd2984 Reported-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1656 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-16configure: expand library search for libftd2xxStephan Linz
Error was: checking for library containing FT_GetLibraryVersion... no configure: error: You appear to be missing the FTD2xx driver library. Reason were two cases: Case one: The FTD2xx library uses clock_gettime() and in normal cases the linker will find the function in the libc library. Most (older) systems require the program be linked with the librt library to use these (see man clock_gettime: Link with -lrt). Case two: You can rebuild the FTD2xx library (relink from the object files) against the primary (system wide installed) libusb-1.0. So you avoid mixed code (GPL with proprietary code) in the FTD2xx library. In this case, the FTD2xx library provides no private (linked in) libusb-1.0 functionality and require the program be linked with the libftd2xx __AND__ the libusb-1.0 to resolve all the libusb-1.0 symbols. Change-Id: Iaf9a35ab4257e37b98dccd47667378ad2a64b7ed Signed-off-by: Stephan Linz <linz@li-pro.net> Reviewed-on: http://openocd.zylin.com/1614 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-09-13configure: Add libusb-1.0 header bug workaroundAndreas Fritiofson
Force the libusb-1.0 include dir to be treated as a system include path which suppresses the cast-align warnings otherwise failing the build on some platforms. Change-Id: I738cfd793052b8772731d2feeef968ee893bd4bd Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1534 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13configure: auto-enable USB adapters based on libusb availabilityPaul Fertser
This unifies the way the USB adapters are handled, and enables them automatically whenever possible (until explicitly disabled). If an adapter is explicitly enabled but can't be built, abort the configure. Also add infrastructure for generic handling of adapter drivers in configure and print a summary of the configuration results after finishing. The m4 quoting is as conservative as I could get it, and seems appropriate. Change-Id: I1655691e5ea0d8eb9e3f67830b96992ffe33640a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1475 Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13libusb: require pkg-config supportPaul Fertser
An alternative approach to show how much cleaner the pure pkg-config way is. This changes the discovery procedures for libusb-1.0 and libusb-0.1, making them depend on pkg-config being properly installed and configured, including the necessary build host configuration for the cross-builds (see http://www.flameeyes.eu/autotools-mythbuster/pkgconfig/cross-compiling.html) It should make it possible to compile OpenOCD without changes and extra effort on GNU/Linux, FreeBSD users would need to supply a .pc file for their libusb implementation or add LIBUSB1_LIBS and LIBUSB1_CFLAGS to the configure environment. Change-Id: I826e378dd1e0d101a549a573b2c63212a7e00b64 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1467 Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-08jtag: drivers: Add JTAP VPI client driverFranck Jullien
This patch adds a driver for the jtag_vpi server [1]. This server is now part of the ORPSoC version 3 (OpenRISC Reference Platform SoC). The jtag_vpi server provides an interface between OpenOCD and a simulated core. [1] http://github.com/fjullien/jtag_vpi Change-Id: I717b72cace4845f66c878581345074f99002e21a Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1609 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-30configure.ac: Remove obsolete(?) oddityAndreas Fritiofson
It causes build failure by adding the build system's includes to the compiler's search path when cross-compiling with --prefix=/usr. Building seems to work fine without it. It was added in f7274784. No idea what it was trying to solve that couldn't be covered in a better way. Change-Id: Ia32863f0b0cbd498eb34bd2fce73126db5b71a1f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1530 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-07-30automake: use subdir-objects optionPaul Fertser
Automake 1.14 introduced several non-fatal warnings that should help projects prepare to the next major automake release (2.0). Considering the way OpenOCD automake files are written, using subdir-objects doesn't have any adverse effects, so enable it for the future compatibility. Change-Id: I3e7fd93d1b53c5a7ed00ec0f03d2d1510a07f516 Reported-by: Freddie Chopin <freddie_chopin@op.pl> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1517 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-17ULINK driver: port from libusb-0.1 to libusb-1.0 APIMartin Schmölzer
The ULINK driver now uses libusb-1.0 calls (synchronous device I/O) directly (not the common layer provided by libusb1_common.c) Successfully tested with ULINK probe and STM32F103 (debug, erase and write flash). Change-Id: Ic037a3582db85e49a8cc1ec0dd36f629e4757929 Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at> Reviewed-on: http://openocd.zylin.com/1459 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15configure: remove AM_MAINTAINER_MODE, effectively always enabling all the rulesPaul Fertser
There're strong arguments against using this macro (mostly regarding build consistency), so remove it altogether. Change-Id: I90c8e9a86a24571019366435bd868a6799a09c45 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1476 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-11ft2232_libftdi: perform basic configure checking when cross-compilingPaul Fertser
When cross-compiling, current configure script fully ignores libftdi unavailability and proceeds with LIBS having -lftdi -lusb, that results in a non-obvious failure much later. Try to verify libftdi is available by checking if ftdi_new function is linkable. Change-Id: I4f593d8ada1f38f82e7f1baa1a4b37b09619e1b4 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1473 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-14build: add missing configure quotesSpencer Oliver
Change-Id: I14abb24292d4c2ff088c7b95773f73ceac3287cd Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1445 Tested-by: jenkins
2013-06-14build: fix incorrect configure quotesSpencer Oliver
Change-Id: I427035df1ab2bfb2ec6ac8fafc9683f7d3e3bf06 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1444 Tested-by: jenkins
2013-06-12configure: remove --enable-libusb0 option, rework libusb selectionPaul Fertser
This makes libusb handling more consistent: if any driver requires libusb, first check for libusb-1 availability, if not found and libusb0 is ok for this case, try libusb0. A user-visible bug fixed by this is that when a user was selecting a driver that required libusb-1 but was lacking the necessary dev files or libraries, configure didn't complain (but the build was failing of course). --enable-stlink doesn't really require libusb-1 but since it's using the same automake symbol HLAADAPTER, ti_icdi is getting built too which needs libusb1 unconditionally. Since using libusb-0.1 makes little sense anyway, leave that as is. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Change-Id: I630a4ad9e4583743d45b2233bf5d8f4e5c0aab82 Reviewed-on: http://openocd.zylin.com/1434 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12libusb1_common, ftdi: clarify libusb_open error messagePaul Fertser
Print a user-friendly message when libusb_open() fails, e.g. Error: libusb_open() failed with LIBUSB_ERROR_ACCESS when there's a permissions problem. Also output a configure warning if libusb older than 1.0.9 is detected. Change-Id: I800f71f06672fe06c0a98a4e469f853b5021bcfe Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1430 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-10Add BCM2835 (as found in Raspberry Pi) interface driverPaul Fertser
This adds support for JTAG programming by bitbanging GPIOs exposed on the RaspberryPi's expansion header. Tested by connecting directly to an STM32VLDiscovery board, without any additional circuity. I observed maximum about 4MHz on the TCK pin with an old analogue 'scope and about 100kHz when setting the speed to 100kHz. Busyloop waiting is needed because even with a single 0ns nanosleep call (with FIFO priority) it lowers the TCK speed to ~30kHz which is way too low to be useful. The speed testing with adapter_khz 2000 gave the following results: sudo chrt -f 1 nice -n -19 ./src/openocd \ -f interface/raspberrypi-native.cfg \ -c "set WORKAREASIZE 0x2000" \ -f target/stm32f1x.cfg -c "adapter_khz 2000" wrote 131072 bytes from file random.bin in 3.973677s (32.212 KiB/s) dumped 131072 bytes in 1.445699s (88.538 KiB/s) This is 3.7 times faster for writing and 14.3 times faster for reading compared to the generic sysfsgpio driver; probably the writing speed is limited by the target itself here and reading speed might be considerably higher too with appropriate connection and a capable target. BCM2835 name is choosen over BCM2708 because the published peripherals datasheet uses the particular model name and not family name. Change-Id: Ib78168be27f53c2a3c88c3dd8154d1190c318c78 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/758 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05Added OpenJTAG DriverRyan Corbin
Updated OpenJTAG driver from www.openjtag.org to work with latest version of OpenOCD. Change-Id: I2917f4e5835fb9ca5265e81dc38515fa97ae9503 Signed-off-by: Ryan Corbin <corbin.ryan@gmail.com> Reviewed-on: http://openocd.zylin.com/1406 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05aice: add Andes AICE supportHsiangkai Wang
Andes AICE uses USB to transfer packets between OpenOCD and AICE. It uses high-level USB commands to control targets instead of using JTAG signals. I define an interface as aice_port_api_s. It contains all basic operations needed by target-dependent code. Change-Id: I117bc4f938fab2732e44c509ea68b30172d6fdb9 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1256 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-04drivers/jtag: rewrite usb_blaster driverRobert Jarzmik
Rewrite the Altera USB Blaster dongle driver : - make extensive use of byte-shift mode, to improve JTAG speed. This is the main reason of the rewrite. It improves the memory dumps with a factor 3 at least, and upload 100 times, from 1 kBytes/sec to 100 kBytes/sec with a USB-Blaster connected to an Altera Virtual JTAG TAP + OpenRISC CPU. - split the low level API part (between FTDI and FTD2xx) from core driver, so that in the future, if both libftdi and ftd2xx can coexist, the driver will be able to switch dynamically from one access to the other. Change-Id: I2ee9cedf4a5eb27501f337993ee0cdee52517e7c Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Marek Czerski <ma.czerski@gmail.com> Tested-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/467 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Alexandre Becoulet <alexandre.becoulet@free.fr> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-05Restore normal development cycleFreddie Chopin
1. Archive NEWS for 0.7.0 release 2. Add new blank NEWS file 3. Bump version to 0.8.0 and restore "-dev" suffix Change-Id: I21febc042faeed294f3beeb5e683535dbf011e8f Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-05-05The openocd-0.7.0 release.v0.7.0Freddie Chopin
Change-Id: I08157f47ac056e6d2089119dd2d6cbab11b521e8 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28Restore -dev suffixFreddie Chopin
Change-Id: I26f49e02d228b59533237607fa8307ecc627409e Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28The openocd-0.7.0-rc2 release candidate.v0.7.0-rc2Freddie Chopin
Change-Id: I0a3576dd098d73437547b619c726cacd8f1dba64 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28build: fix libftd2xx regressionSpencer Oliver
Fix build when targeting closed src ftd2xx drivers. configure is unable to find the dynamic linking loader lib (dl) as it is included before ftd2xx library. Change-Id: Ibe7308b66ed846288a31f7a27ff549b6f39baeec Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1355 Tested-by: jenkins Reviewed-by: Luca Bruno <lucab@debian.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-21Restore -dev suffixFreddie Chopin
Change-Id: I3662c5993766a76d6dd62b919c56cc059c4e50d4 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 23:29:44 +0000