OpenOCD - Unnamed repository; edit this file 'description' to name the repository.

Age	Commit message (Expand)	Author
2015-01-30	Use (uint8_t ) for buf_(set\|get)_u(32\|64) instead of (void )	Paul Fertser
2015-01-30	stm32f2x: Fix byte order bug.	Jens Bauer
2015-01-30	flash/nor/kinetis: pull SRST low during mass erase	Paul Fertser
2015-01-28	jtag: Rewrite TAP verification/auto-probe logic	Andreas Fritiofson
2015-01-28	ARMv7-A: remove useless switch construct	Uwe Kleine-König
2015-01-26	jtag/drivers/cmsis-dap-usb: fix cmsis_dap_serial	Jaakko Kukkohovi
2015-01-26	tcl/board: frdm kinetis boards have SRST connected	Paul Fertser
2015-01-26	tcl/target/stellaris: Snowflake supports SYSRESETREQ too	Paul Fertser
2015-01-26	tcl/target: consolidate Kinetis configs	Paul Fertser
2015-01-26	jtag/drivers/stlink: demote the output of available speeds to DEBUG	Paul Fertser
2015-01-26	jtag/hla_interface: avoid segfault with adapters that do not have configurabl...	Paul Fertser
2015-01-26	stm32f07/9: Both devices have 256 kByte Flash Maximum.	Uwe Bonnes
2015-01-26	stm32f0x: Remove duplicate code for revision string.	Uwe Bonnes
2015-01-26	stm32f09x: Print info in get_stm32x_info.	Uwe Bonnes
2015-01-26	tcl/board: Add ST NUCLEO L152RE configuration	Thomas Eichinger
2015-01-26	cfg: add srst_nogate to the supported targets, remove from board configs	Paul Fertser
2015-01-26	stm32f4/nucleo: Use only one configuration for all stm32f4 nucleo boards.	Uwe Bonnes
2015-01-26	stm32f0/nucleo: Use only one configuration for all stm32f0 nucleo boards.	Uwe Bonnes
2015-01-26	flash/nor/stm32f1: Add handling of stm32f09, nearly same as stm32f07.	Uwe Bonnes
2015-01-15	target/stm32xx: Endian is not configurable.	Karl Palsson
2015-01-15	flash: add AT91SAM4SD16C device	Jörg Wunsch
2015-01-15	contrib: itmdump: fix multi byte decoding	Karl Palsson
2015-01-15	tcl/interface/ftdi: add config for the IoT-LAB adapter	Paul Fertser
2015-01-15	tcl/board: Add TI TMDX570LS20SUSB board config	Andreas Färber
2015-01-15	stlink: add reconfigurable speed support	Spencer Oliver
2015-01-15	hla: add ability to change adapter speed (if supported)	Spencer Oliver
2015-01-15	cfg: stm32l1: Use specific chipname	Karl Palsson
2015-01-15	jtag/hla: output possible idcode candidates in case of mismatch	Paul Fertser
2015-01-15	jtag: Avoid extra SRSTn resets when connecting	Evan Hunter
2015-01-15	docs: update bug tracker URL	Spencer Oliver
2015-01-15	lpc2000: Improve lpc2000 flash driver.	Nemui Trinomius
2015-01-10	cortex_a: Add support for A7 MPCore	Alexander Stein
2015-01-10	cortex_a: Add support for A15 MPCore	Kamal Dasu
2015-01-09	ChibiOS: struct ChibiOS_params_list[] should not be const	Tomas Vanek
2015-01-09	transport: clarify error message when transport is not selected	Karl Palsson
2015-01-09	flash: fix kinetis driver typos	Spencer Oliver
2015-01-09	cfg: fix lpc17xx regression	Spencer Oliver
2015-01-09	avoid segfaulting when attempting to set an unavailable type of breackpoint	Salvador Arroyo
2015-01-09	Mac/PPC: Fix build.	Jens Bauer
2015-01-09	swd: handle various failure conditions	Paul Fertser
2015-01-09	target: improve robustness of polling and reexamination	Paul Fertser
2015-01-09	rtos: free gdb packet allocated memory	Spencer Oliver
2015-01-08	checkpatch: fix check for the FSF address	Paul Fertser
2015-01-07	jtag: Remove unnecessary global variable	Andreas Fritiofson
2015-01-07	jtag: Fix memory leaks in jtag_tap_free()	Andreas Fritiofson
2014-12-03	stm32l: split l0/l1 support no jtag, different HSI settings	Karl Palsson
2014-12-03	stm32: Fix L0/1xx CPUTAPID setting and add new L1xx BSTAPIDs	Juha Niskanen
2014-11-24	tcl/target/stm32f4: ramp up JTAG speed, HSI is 16MHz there	Uwe Bonnes
2014-11-24	tcl/target/stm32f4x: add F401 and F411 IDs	Uwe Bonnes
2014-11-24	lpc2000: ignore status of part ID IAP command	Grigori Goronzy