aboutsummaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2015-02-11mini51: support for Nuvoton NuMicro M051 series flash memoryPawel Si
2015-02-11tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure)Jacob Palsson
2015-02-11em357: added target files for em357 and em358Ed Beroset
2015-02-11jlink: Added hardware version number for JLink firmware on LPC-Link2Nemui Trinomius
2015-02-11cfg: TI Tiva C dk-tm4c129x Evaluation KitsHeinz Schweiger
2015-02-11lpc2000: add chip IDs for LPC11U6x/LPC11E6xMichael Brown
2015-02-11psoc4: support for Cypress PSoC 41xx/42xx familyTomas Vanek
2015-02-04stm32lx: do not attempt mass-erase in-place of first bank eraseJussi Kivilinna
2015-02-04flash/nor/stm32lx: use 0 base to autodetect second bank locationPaul Fertser
2015-02-04doc: add stm32lx mass_erase descriptionPaul Fertser
2015-02-04flash/nor/stm32l: unify waiting for busy flag functionsPaul Fertser
2015-02-04flash/nor/stm32l: fix mass erasePaul Fertser
2015-02-04configure: define WIN32_LEAN_AND_MEAN early to make it effectivePaul Fertser
2015-02-04Makefile.am: link libusb-1.0 after libusb-0.1 to fix dependenciesPaul Fertser
2015-02-04flash/nor/stm32f2x: add new revisions of STM32F4x partsPaul Fertser
2015-02-04Subject: [PATCH] update src/flash/nor/stm32f2x.cRémi PRUD’HOMME
2015-02-02Add more STM32F3 IDs in target/stm32f3.cfg.Uwe Bonnes
2015-01-30drivers/stlink: clarify "init mode failed" messagePaul Fertser
2015-01-30tcl/target: add lpc8xx.cfgPaul Fertser
2015-01-30jtag/drivers: remove useless checks causing build failure with clang 3.5.0Paul Fertser
2015-01-30armv4_5: Continue the change from uint32_t to uint8_t[4] for regsAndreas Fritiofson
2015-01-30Use (uint8_t *) for buf_(set|get)_u(32|64) instead of (void *)Paul Fertser
2015-01-30stm32f2x: Fix byte order bug.Jens Bauer
2015-01-30flash/nor/kinetis: pull SRST low during mass erasePaul Fertser
2015-01-28jtag: Rewrite TAP verification/auto-probe logicAndreas Fritiofson
2015-01-28ARMv7-A: remove useless switch constructUwe Kleine-König
2015-01-26jtag/drivers/cmsis-dap-usb: fix cmsis_dap_serialJaakko Kukkohovi
2015-01-26tcl/board: frdm kinetis boards have SRST connectedPaul Fertser
2015-01-26tcl/target/stellaris: Snowflake supports SYSRESETREQ tooPaul Fertser
2015-01-26tcl/target: consolidate Kinetis configsPaul Fertser
2015-01-26jtag/drivers/stlink: demote the output of available speeds to DEBUGPaul Fertser
2015-01-26jtag/hla_interface: avoid segfault with adapters that do not have configurabl...Paul Fertser
2015-01-26stm32f07/9: Both devices have 256 kByte Flash Maximum.Uwe Bonnes
2015-01-26stm32f0x: Remove duplicate code for revision string.Uwe Bonnes
2015-01-26stm32f09x: Print info in get_stm32x_info.Uwe Bonnes
2015-01-26tcl/board: Add ST NUCLEO L152RE configurationThomas Eichinger
2015-01-26cfg: add srst_nogate to the supported targets, remove from board configsPaul Fertser
2015-01-26stm32f4/nucleo: Use only one configuration for all stm32f4 nucleo boards.Uwe Bonnes
2015-01-26stm32f0/nucleo: Use only one configuration for all stm32f0 nucleo boards.Uwe Bonnes
2015-01-26flash/nor/stm32f1: Add handling of stm32f09, nearly same as stm32f07.Uwe Bonnes
2015-01-15target/stm32xx: Endian is not configurable.Karl Palsson
2015-01-15flash: add AT91SAM4SD16C deviceJörg Wunsch
2015-01-15contrib: itmdump: fix multi byte decodingKarl Palsson
2015-01-15tcl/interface/ftdi: add config for the IoT-LAB adapterPaul Fertser
2015-01-15tcl/board: Add TI TMDX570LS20SUSB board configAndreas Färber
2015-01-15stlink: add reconfigurable speed supportSpencer Oliver
2015-01-15hla: add ability to change adapter speed (if supported)Spencer Oliver
2015-01-15cfg: stm32l1: Use specific chipnameKarl Palsson
2015-01-15jtag/hla: output possible idcode candidates in case of mismatchPaul Fertser
2015-01-15jtag: Avoid extra SRSTn resets when connectingEvan Hunter
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-04-06 09:28:04 +0000