aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-06SAM3: Remove unused reference to SUPC registersAttila Kinali
The SUPC (Supply Controller) registers are on different base addresses on different SAM3 chips: SAM3U: 0x400e1210 SAM3N: 0x400e1410 SAM3S: 0x400e1410 This creates a problem with the sam3_reg_list array which is const, but would need to be changed at runtime to account for this variability. As this register is not used anywhere, it's simplest to just remove it. Change-Id: I987eb371648d826aa6d5e9de18d38c7bb66d6fca Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/495 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06SAM3: Add missing architecture names for SAM3S and SAM3NAttila Kinali
Change-Id: Ie2177487d4315219eb364db360cb7f88d2720783 Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/494 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06SAM3S: correct flash sector sizes.Attila Kinali
Lock region count and sector sizes did not match datasheet. (see 6500C-ATARM-8FE11 "SAM3S Series Datasheet", Table 7-1) Change-Id: Ic511802f96ed03856467a24a6736349205a0576a Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/493 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06config: fix typo in at91 configJaap de Jong
Change-Id: I596cbac3439456fcb02111caee6e8c290c12a6d5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/504 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-02-29stlink-v1: fix memory writesSzymon Modzelewski
implement stlink_usb_send and use it to fix stlink_usb_write_mem using two calls to stlink_usb_recv is inappropriate since each call issues a SG command on stlink-v1, resulting in errors Change-Id: I24ef9f2dda284e041dc4a532b59968a77eebe702 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/498 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29Revert "stlink-v1: fix memory writes"Spencer Oliver
I committed in the wrong order This reverts commit 79230a8e3c5b85601fca730dfc09ecc52e693afa Change-Id: Iace872ac4844891f4f38fca87448a2ebd9f17593 Reviewed-on: http://openocd.zylin.com/497 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29stlink-v1: code cleanupSzymon Modzelewski
This patch moves the bulk of the stlink read/write code into the stlink_usb_xfer set of functions and implements stlink_usb_recv in terms of the generic stlink_usb_xfer stlink_usb_xfer will be needed to implement stlink_usb_send without code duplication stlink_usb_xfer: -sends the stlink command -performs a read or write (as requested) -checks the status (v1 only) Change-Id: I0137d52620bd4883d46c9977a9e73f67622000a1 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/477 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29Fix assert to check flash programming offsetAttila Kinali
The assert introduced in 00c864835149a96b431fc8f31dd89542d88fd383 checks whether the programming offset equals to page_size of the flash, while it wants to check whether the offset is a multiple of the page_size. Change-Id: I794d021951a28c1cc520b5eea5d500f097721b06 Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/482 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-02-29flash: add stm32lx High Density DevicesSpencer Oliver
Change-Id: Ieed9de4b078e1ebf659054a758b4f69acdf5b83e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/466 Tested-by: jenkins
2012-02-29flash: change stm32lx driver probe behaviourSpencer Oliver
Currently stm32lx flash driver will remove the readout protection if set during a probe. This may not be what the user wants, so let them decide. Change-Id: I8575e3b339b10a4f7bac57cca9586dcab513d347 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/465 Tested-by: jenkins
2012-02-29stlink-v1: fix memory writesSzymon Modzelewski
implement stlink_usb_send and use it to fix stlink_usb_write_mem using two calls to stlink_usb_recv is inappropriate since each call issues a SG command on stlink-v1, resulting in errors Change-Id: I52ff9ee8f5d9ae0d47356477468eb98952205c99 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/478 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-27flash: add new devices to pic32mx flash driverSpencer Oliver
update as per DS61145 rev J Change-Id: I2b5da84248ff2f44c7ca9d2ed1c52db453714c05 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/461 Tested-by: jenkins
2012-02-27cfg: Beaglebone/AM335x refactorNeil Jensen
Split out functions specific to the AM335x SOC into the target directory and simplified the board config file. This should allow one to quickly create new configs for boards based on the TI processor family. Change-Id: I0c3db97950dfa832f1f1918fc10c180f068bba74 Signed-off-by: Neil Jensen <neil30al@gmail.com> Reviewed-on: http://openocd.zylin.com/489 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-27cfg: beaglebone cleanupNeil Jensen
Simplified the configuration and removed things that were not necessary for debugging. Also added reset configuration. Signed-off-by: Neil Jensen <neil30al@gmail.com> Change-Id: I96f991c3051aa68278212cd6509484cbce40ccb7 Reviewed-on: http://openocd.zylin.com/488 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-26jtag: use correct tap -ignore-version maskSpencer Oliver
when -ignore-version is used we should mask of the upper 4bits not 8bits. Change-Id: I9ffe24c2aeeb414677357a647609fdf018890194 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/473 Tested-by: jenkins
2012-02-26jtag: fix cmd scan_chain expected_ids bugSpencer Oliver
This fixes scan_chain to correctly print all the expected_ids. Change-Id: I93738980d85e0fe369d40c58b19339424d37ec34 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/474 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-26flash: add stm32f2x async flash loaderSpencer Oliver
This enable the stm32f2x flash driver to use the asynchronous algorithm support. Speed increase is as follows: before - wrote 1048576 bytes from file stm32f4x.bin in 30.453804s (33.625 KiB/s) after - wrote 1048576 bytes from file stm32f4x.bin in 23.679497s (43.244 KiB/s) This also fixes a bug that was in the old flash loader. The old loader waited while bit16 of the status reg was 0, the new loader waits until this bit is 0 as stated in the flash spec. Bizarrely this bug did not effect programming on any tested parts. Change-Id: I3efc94d42cbe81283673a8f4203700638080af6e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/460 Tested-by: jenkins
2012-02-26flash: add stellaris async flash loaderSpencer Oliver
This enable the Stellaris flash driver to use the asynchronous algorithm support. Speed increase is as follows: before - wrote 65536 bytes from file test.bin in 5.486040s (11.666 KiB/s) after - wrote 65536 bytes from file test.bin in 2.274001s (28.144 KiB/s) Change-Id: I9004c9aadffa1ae3b0cbf908e6549b5b1f794508 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/403 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-26target: add target async algorithm supportSpencer Oliver
Currently the stm32f1x flash driver uses an asynchronous algorithm as part of the block flash programming. This greatly speeds up flash programming as the target is always running. Moving the async code to the target enable other targets to use this added functionality. Change-Id: I8e53f094c2ef7848a7f86ddb9a35b6edbfc8454a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/402 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-24cfg: beagleboneNeil Jensen
Moved ti_beaglebone.cfg to the board configuration directory. This was originally placed in the wrong location. Signed-off-by: Neil Jensen <neil30al@gmail.com> Change-Id: I05d10b62b1a21618635ee1773c30d77dc756ec82 Reviewed-on: http://openocd.zylin.com/481 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-23cfg: Beaglebone SupportNeil Jensen
Added support for the Beaglebone board based on the am335x processor family. After much trial and error, I was able to configure the Icepick-D and connect to the processor, halt execution, and run a sample program. This is a unified config file (it doesn't use any include statements) and further work needs to be done to split out the icepick-d configuration to be more generic. Change-Id: Ia1b8e9f01f56bd4f8c575ba3d0160c248583a15e Signed-off-by: Neil Jensen <neil30al@gmail.com> Reviewed-on: http://openocd.zylin.com/471 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-23target: add function to get number of bytes available in working areaAndreas Fritiofson
This is a much cleaner solution to the problem of allocating as much working area as possible than what is currently being done in most/all flash drivers (which is: try an arbitrary sized chunk, if it fails, pick a smaller number, rinse and repeat). Use this function to find out how much working area is available, limit or restrict that amount at will and then simply allocate it. Change-Id: Ib7d5d0b7485aed3e0a4fad60c1bedb7dfd16146f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/446 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-23target: rewrite working area allocatorAndreas Fritiofson
The existing allocator couldn't reuse a freed allocation if the sizes didn't match exactly. That led to problems when for example a flash write routine had allocated all of the working area to speed up operation. A subsequent verify pass couldn't allocate space for the checksum algorithm even though all previous allocations had been freed. This allocator is marginally more complex, but solves the above problem by splitting larger free areas to fulfill smaller requests and by merging released areas into adjacent free areas. An initial free area, covering the entire specified address range, is set up on first allocation, and all allocations are split off from (and ultimately merged into) that one. It can also easily be adapted to support several disjoint working areas for the same target, by setting up several initial free areas and slightly modifying the merge code. Change-Id: I6faaf9801312bb19a4fa4474694a0cd1c6e0ab54 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/445 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-22cfg: enable stm32f2x SYSRESETREQ supportSpencer Oliver
The stm32 family supports using SYSRESETREQ as a software reset, lets use it. Change-Id: I171ffa8d888a2d0c28b266051030311521e9bca9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/472 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-02-22stlink: support expected-id 0Spencer Oliver
This brings the stlink driver inline with the rest of OpenOCD. If the user configures the tap as -expected-id 0 then the IDCODE will be treated as a wildcard and ignored. Change-Id: I99160c69b2b40f5b1f608bb59ab6630894502fd8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/476 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-02-22docs: fix more texinfo warningsSpencer Oliver
A period or comma must follow the closing brace of an @xref. Change-Id: Ida5dc3600eca328d95b0a8f6b5c9fe0a0f3ba820 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/475 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-02-22Sometime in the past, nand_fileio_finish started to return ERROR_OK (with ↵Stian Skjelsad
the value of zero) on success. Change-Id: Ifb743c1617e2a6071a87c901fae8165969efcdbf Signed-off-by: Stian Skjelstad <stian@nixia.no> Reviewed-on: http://openocd.zylin.com/468 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-17stlink: add error status checkMathias K
This patch add the status check. Change-Id: I0fdb9bf66dad5ae416c7aa4c6e19116f846571f9 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/463 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-17Fix Typo in cfg fileJonathan Dumaresq
Change-Id: Id91ef70988212185f9ec653cbf5dc4e1defb1b9e Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-on: http://openocd.zylin.com/464 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-16Fix typo that result in recursion.Mathias K
Change-Id: Ie1102b4960bcb5acb254eae69b94fe87ab33dd0b Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/462 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-16stlink: add arm semi-hosting supportSpencer Oliver
Change-Id: Ib275d451a9201580f08ced090e50cf45eb3ab3e2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/459 Tested-by: jenkins
2012-02-16cfg: change default stellaris working areaSpencer Oliver
This sets the default stellaris working area to 2k rather than the current 8k. 2K is the smallest RAM size in the stellaris family. Change-Id: I1407f758eb0926cc094b824a6d25199b313c45de Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/458 Tested-by: jenkins
2012-02-16docs: fix texinfo warningsSpencer Oliver
A period or comma must follow the closing brace of an @xref. Change-Id: I272f1e7fac8f1fee4844f485b0b8e2e4e9cf352d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/456 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-02-16build: fix automake 1.11.2 issuesSpencer Oliver
automake 1.11.2 throws `pkglibdir' is not a legitimate directory for `DATA' if nobase_dist_pkglib_DATA is used. We work around this issue by defining our own location. Change-Id: I3c29e2df0b67e745283c50d358e31699bd60dc74 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/457 Tested-by: jenkins
2012-02-16Add stm32f0x targetJonathan Dumaresq
Change-Id: I4abfef4459b7e2780d17bdd7623fd1ef797cc8ea Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-on: http://openocd.zylin.com/437 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-16Add stm32f0x probe and info workingJonathan Dumaresq
I used the CPUID instead of adding a new argument to the flash bank command Fixed Type in comments Add the failsafe return value in device_id Change-Id: Ieb5a46fc002b5390a0c81bc8b49f6c687036ae1d Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-on: http://openocd.zylin.com/438 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-16Add bootloader mode.Mathias K
This patch add the bootloader define. Change-Id: I280a8a35c3514910dd381de3ab8ad59c9bd74ca1 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/455 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-13flash: fix incorrect stm32f2x/stm32f4x flash size registerSpencer Oliver
The ref manuals for the stm32f2x (RM0033 Rev4) and stm32f4x (RM0090 rev1) are unclear to the address of the flash size register (F_ID). According to contacts @ ST this is the correct address, the manuals will be updated in due coarse. Change-Id: If9fb83b3100458d17038cf27c2b23355e1dc5a9e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/448 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-02-13docs: correct small typoSpencer Oliver
Change-Id: I5e8bea591274b4032d3e04c4be7e9110138d5bc2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/447 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-13add icnova_sam9g45_sodimm supportLars Poeschel
This adds support for in-circuit icnova sam9g45 sodimm: http://www.ic-board.de/product_info.php?info=p214_ICnova-SAM9G45-SODIMM.html|ICnova The NAND flash is not yet working. Change-Id: I94ca5203f8d8a55dec1e4e87cd0631bd2b8393f9 Signed-off-by: lars@kiwigrid.com Reviewed-on: http://openocd.zylin.com/418 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-13topic: Add support for i.MX28EVKJames Robinson
Added the file imx28.cfg to the target directory Added the file imx28evk.cfg to the board directory Change-Id: I02a74a03f3773892f830d13660ffdded34f3261d Signed-off-by: James Robinson <jmr13031@gmail.com> Reviewed-on: http://openocd.zylin.com/428 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-13Add init_board documentationFreddie Chopin
This patch adds init_board concept information to OpenOCD manual. Additionally a link from init_targets chapter to new chapter about init_board is added. Change-Id: I09b9aaa1cf68b94f35701224f641cae9811a5bcf Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/440 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-10cfg: add revb ek-lm3s811 board configSpencer Oliver
Add board config for older (revb) ek-lm3s811 Change-Id: I75aca1714de3e88b60d00fa0f99f2c4b076b569c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/444 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10cfg: fix incorrect STM32L SW-DP idSpencer Oliver
STM32L ref manual (RM00038 Rev5) states the SW-DP id should be 0x4ba00477. The correct value from silicon is 0x2ba01477 - the typo has been confirmed by ST. Change-Id: Ie35a1f13dc5dedc1b148fb219c6974bfa48b537c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/441 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10cfg: add stm32ldiscovery board configSpencer Oliver
Change-Id: I392fdc4c588783fda1c7d4d6413b86ae9aa3f6b9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/442 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10cfg: add ST-LINK TRANSPORT config overrideSpencer Oliver
This enables the user to override the transport used for st-link. If JTAG is selected it will also change the default id used to the JTAG id rather than the SW-DP id. Change-Id: I4fe352e4932e2f4ec278168e99ba2d2d50fd850a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/443 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-09Add init_board procedure executed after init_targetsFreddie Chopin
This adds init_board procedure that behaves exactly the same as init_targets - it can be overriden by "next level" scripts. This procedure is executed after init_targets, allowing common stuff (jtag chain, memory, flash, ...) to be configured in target script (via init_target) and leaving rest (like additional memory, reset configuration, reset-init handlers, ...) to be done in init_board. This makes init_targets scheme more complete and easier to use - current board scripts will not need new init_targets, because everything can be "packed" in init_boards. Moreover it solves the problem of variables being set in init_targets (executed after init), which were not accessible by "linear" scripts (parsed before init). All that has to be done is to enclose all code in board config file in init_board procedure. Change-Id: I0736b1ff9873a687966407d62b58ccf29a8e597b Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/427 Reviewed-by: Chris Morgan <chmorgan@gmail.com> Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-09Add missing init_targets documentationFreddie Chopin
Add init_targets procedure documentation to OpenOCD manual explaining the concept. Change-Id: I82933ed90397cbcdc5c72801182573ca69b1d265 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/439 Reviewed-by: Chris Morgan <chmorgan@gmail.com> Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-07cfg: add stm32vldiscovery board configSpencer Oliver
Change-Id: I6343d1e61153ba71c71f8a473171972abb8e400d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/432 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-07docs: add original stlink (STLINK-V1) usage noteSpencer Oliver
Add a note to the docs about the original stlink being broken under linux. Change-Id: Ib440d78e5c7d31eeace99f611a76fcf701bfb8bc Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/433 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-21 20:05:00 +0000