aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-01-12stlink: add dummy speed handlersSpencer Oliver
Change-Id: I0445be7867637728145941b06225dc0acc5380e8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/355 Tested-by: jenkins
2012-01-12flash: use correct device_id maskSpencer Oliver
The stm32 drivers have been using 0x7ff as the DEV_ID mask, this should have been 0xfff. Change-Id: I232469620969d6dd1b9a2a2aa15ec18b947dbb05 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/352 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-01-12optimize: replace while loop by memcpyMathias K
There is no need to use a while loop here. This patch simple copy the last bytes with the system function. Change-Id: Ibda72dca449746efeba5a1af2e45c5990f9cf347 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/364 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-12build: remove unused variablesSpencer Oliver
detected by clang. Change-Id: Id9effcc5437870f37fecd33803f7753c6eca53d6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/361 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-01-12flash: pre-check flash unlock for stm32f2xBruno FLEURETTE
add checking of the current flash lock status before performing the unlock sequence (which would fail in an unlocked state) Change-Id: I693294c9cd2f59e69cb5bf3338120052fd680b1e Signed-off-by: Bruno FLEURETTE <bruno.fleurette@gmail.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/363 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-01-12xsvf: fix clang warningSpencer Oliver
clang reports 'Function call argument is an uninitialized value'. Change-Id: I50f4a7932b59930a5f1e3ece70b12c59e85ea3c6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/360 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-01-12target: fix missing semihosting return pathSpencer Oliver
bug nicely caught by clang. Change-Id: I7abf0fdd76666fb3eb1c83e3edfd01e0da485ffe Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/359 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-01-09flash: support stm32f4x flashSpencer Oliver
This uses the same controller as the stm32f2x family. Change-Id: I931a9ceb0cd1219514d14b8b59475179e543dd0f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/338 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-01-09flash: use stm32f2x flash size registerSpencer Oliver
Use the flash size register to calculate flash info. Change-Id: Ia230db8a08d440710c030a9e5001f20561c9f420 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/337 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-01-09docs: add initial st-link infoSpencer Oliver
Change-Id: I213bf26dec582fd8e273e604d43a6e849599dd50 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/340 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-01-09contrib: add stlink udev rulesSpencer Oliver
Change-Id: I3f11de8abfaf8821311a7aa0fd237006de3c2792 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/333 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-01-09cfg: add stlink pseudo stm32 targetsSpencer Oliver
Change-Id: I71253c2090162b1214bbbb37396735bb9128f920 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/334 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-01-09cfg: use consistent chipnameSpencer Oliver
Change-Id: I41e0788f830d5ece13e6231a99d5b4013c9c678f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/331 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-01-09docs: fix doxygen buildSpencer Oliver
This fixes issues with newer versions of doxygen Change-Id: Id5d3287857cb154e26064b4ce37f6b72117d5254 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/350 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-01-09rtos: fix bug in error handlingØyvind Harboe
checking for != ERROR_FAIL is broken. Change-Id: Id7085afac653bb9c38d08928227a9ea402d8e6e9 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/351 Tested-by: jenkins Reviewed-by: Michel JAOUEN <michel.jaouen@stericsson.com> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-01-07docs: whitespace fixesSpencer Oliver
Change-Id: I9c6c7017ce3077bb131a05ea9b53a115506c94d9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/339 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-01-04Change return value on error.Mathias K
On wrong parameters a error is signalized to the calling function. Change-Id: I484443fdb39938e20382edc9246d5ec546a5c960 Signed-off-by: Mathias K <kesmtp@freenet.de> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/282 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-01-04stlink: update to use ERROR_COMMAND_SYNTAX_ERRORSpencer Oliver
Change-Id: I21b669b09df65b56659d2f057cf389ba7b1cecfa Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/335 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-01-04flash: introduce .usage field for nand and nor flash driver structureØyvind Harboe
Change-Id: I47e7ec8fa8c70d2addc3aa52d7c97e9e1e7bb662 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/301 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-04retire ERROR_INVALID_ARGUMENTS and replace with ERROR_COMMAND_SYNTAX_ERRORØyvind Harboe
Change-Id: I6dee51e1fab1944085391f274a343cdb9014c7a4 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/300 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-04command: print BUG warning when usage is missingMathias K
These error messages will prompt patches to be submitted for missing .usage or empty fields. All of the below must be resolved before next release. The Jim defined commands are excluded from this checklist because the help text can be set later than during command registration. strlen(.usage) == 0 means that the command expects no arguments. Updates to this patch in Gerrit to fix problems below are most welcome. Anyone can push updated versions of a patch to Gerrit. If there are no further updates to this patch within a week, it will be pushed to the master branch to prompt more fixes. These were caught by launching OpenOCD. Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out ^C oyvind@fierce:~/openocd$ openocd -c "interface dummy" -f board/at91eb40a.cfg 2>&1 | grep -w BUG Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out Change-Id: I2c3e529530a15d2295a1950ffc59e8f2fc661012 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/299 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-04build: fix make distSpencer Oliver
add missing files to distribution after previous commit. Change-Id: I0e4b278c090c71d15dd059b6755c9821427cc8ab Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/332 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-01-03Add STM32F2X/STLINK target config file.Mathias K
Change-Id: I02161fa05da993b5b966c31a706667d1bd91935d Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/287 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-03Add STLINK/V2 interface config file.Mathias K
Change-Id: I6df27ce619a5938ef854ff89bf76c6de4e122204 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/286 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-03STM32 ST-LINK target initial releaseMathias K
STM32 ST-LINK target added. Change-Id: Ibe2b7a3c0d5a8cf73d8680d6019adbdb62d68fa2 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/279 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-03ST-LINK USB initial releaseMathias K
ST-Link USB support added. Change-Id: I2812646f2895b1529ff3f911edbdce7fa0051c8f Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/261 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-03Make jim functions public accessible.Mathias K
Change this 2 functions to make it accessible for other tcl interfaces. Change-Id: Idee07fcc779941b037a05a40c021e3fb0b1a4a7a Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/277 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-03Make cortex_m3 functions public accessible.Mathias K
Change this functions to make it accessible for other target implementations. Change-Id: Ib41fc793cfb4de5439af026c2e8b52e7a9507c85 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/278 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-03add private data pointer to the tap interfaceMathias K
This will give us the ability to add special data structures and new interfaces without rewriting the complete jtag engine. Change-Id: I21a6e1daa96c5f4d111bbb734c7c1fbc2eaee227 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/244 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-03helper: fix arm11 help textSpencer Oliver
This fixes a long standing bug: see Trac #4 Increased help text recursion limit and added LOG_DEBUG so we can catch future errors like this. Change-Id: I5fac95c4486eaddaf1e88a27ecb1835168f87711 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/291 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-12-31build: fix mingw build issuesSpencer Oliver
8901fca0270fec41b12c30c7dbd806d460548c5b broke the build under mingw, this fixes that. Change-Id: I22b91e220dac3b68cc576b65a9f1b8711e64263a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/298 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-12-23Renamed mx2.{c,h} to mxc.{c,h} and added copyright noticeErik Ahlén
Change-Id: I07a280acdce58b8af4a145cd6beafccbb59f20d7 Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on: http://openocd.zylin.com/272 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23Documentation for mxc NAND flash controllerErik Ahlén
Change-Id: I9e552491e8b4737c01e4f8ae2b9a582b6ff2bc5d Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on: http://openocd.zylin.com/273 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23Added support for i.MX35 NAND Flash Controller (v2)Erik Ahlén
Change-Id: I7237ec29792b6a7ee690751fa7e6cba0846d5aa8 Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on: http://openocd.zylin.com/271 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23Added command to enable/disable/query BI-swap for MXC NANDErik Ahlén
Change-Id: Ifa3eb739afe0760a974b57c5a17cc3bf7704ba79 Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on: http://openocd.zylin.com/270 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23Made BI-swap optional in mxc.Erik Ahlén
Change-Id: Ibdf3b1e415adcf1fdb38de25fe05da726ef58ca4 Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on: http://openocd.zylin.com/269 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23Added board type as a parameter to mx2 NFC as they have different base ↵Erik Ahlén
addresses. Change-Id: I7bc326e9a8d9f6817f046a7faeebede567c53dd2 Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on: http://openocd.zylin.com/268 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23at91sam3XXX.cfg: Configure JTAG clock to 500 kHz.Ulf Samuelsson
This affects all configurations including target/at91sam3XXX.cfg Change-Id: I2c1e1edf0986d30e63f109604a38bf402ded369e Signed-off-by: Ulf Samuelsson <ulf@emagii.com> Reviewed-on: http://openocd.zylin.com/292 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23Olimex-ARM-USB-OCD-H: Add udev ruleUlf Samuelsson
Change-Id: Ifc9a1f7fa9445e05560c335b5bba3a33caeccc51 Signed-off-by: Ulf Samuelsson <ulf@emagii.com> Reviewed-on: http://openocd.zylin.com/288 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23jtag: only if an in_value storage is provided will the captured IR value be ↵Øyvind Harboe
checked added comments and removed bogus assert. Change-Id: Ic7aa56570a84834b1265df03d25a47fd11c4d626 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/297 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-22git should ignore patches from format-patchUlf Samuelsson
Change-Id: Iafce872fa7559180834532ba80941dec3db7d079 Signed-off-by: Ulf Samuelsson <ulf@emagii.com> Reviewed-on: http://openocd.zylin.com/295 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-12-20jtag: stop using sharp corner of JTAG APIØyvind Harboe
this particular edge case of the JTAG API will no longer be supported. the in_value buffer must be provided by the caller when the callback needs the buffer. Change-Id: I552c72a64af6875f4aa4fa9b923194dcf3b57b64 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/265 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-20jtag: make caller always allocate bufferØyvind Harboe
simplifies the API and there is only one remaining user at this point. Is the implementation busted where the check does not actually happen now? Change-Id: I776a43766f5576a08df320f6fe41a2750d101bde Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/264 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-20jtag: retire jtag_alloc_in_value32Øyvind Harboe
no longer used after arm7/9tdmi.c stopped using it. Change-Id: I65bfe67641970e63e8276cbd378aa68f5701a8d9 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/263 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-20jtag: retire jtag_alloc_in_value32 APIØyvind Harboe
not needed, reduce area of interface and sharp edges to API. Change-Id: I5347352e7595686634bd0de13fcf6de6e55027b0 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/262 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-19STM32F2x: check flash unlock, add mass eraseMathias K
Add verification of the flash unlock sequence and return an error if the flash is still locked. Add mass erase subcommand. Change-Id: Id586b1eaf983a3f25b933847dd6608c15bf0b07e Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/281 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-19build: libusb use AC_CHECK_HEADERSpencer Oliver
use AC_CHECK_HEADER rather than AC_CHECK_HEADERS so that we do not generate a unrequired HAVE_LIBUSB_1_0_LIBUSB_H define. Change-Id: I23a93d3813716dce797ca1514fdcb84533454c31 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/259 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2011-12-19build: update to using new AC_OUTPUT macroSpencer Oliver
Change-Id: I4937fac73345a85fcad62a2aeb0a106bd4a62467 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/258 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2011-12-19build: correctly quote m4 parametersSpencer Oliver
Change-Id: If7ccb52c107cb4ad7629ffcf237f9003f60e63d0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/257 Tested-by: jenkins
2011-12-19Renamed mx2/imx27 to mxc.Erik Ahlén
Renamed all functions, enums, structs and defines from mx2/imx27 to mxc. This is in preparation of adding support for mx35 NFC(v2). Change-Id: I92ad23f0cfab605215bbf0d5846c5c288423facf Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on: http://openocd.zylin.com/267 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-18 15:28:59 +0000