aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-25Jim_GetResult was called twiceVandra Akos
Removed the superflous call to Jim_GetResult, as we are reading in the result to a variable anyways in the next instruction. Change-Id: Idc96400737dc15e28304e97bcea79fa6c7a88ae1 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/661 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-25target: fix segfault in arm7_9 8/16bit readSpencer Oliver
Seems I5347352e7595686634bd0de13fcf6de6e55027b0 introduced an issue when reading 8/16 bit data - the in buffer was always set to 32bits. Change-Id: Ife2bb6a20fcb3ec0e486655512164f25ae9196b4 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/660 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-05-25jtag: fix incorrect LOG_DEBUG abs_chain_positionSpencer Oliver
Call jtag_tap_add before LOG_DEBUG otherwise abs_chain_position does not get correctly set. Change-Id: I47bd00cc83259c8bfd5551e08c3bb2ebeb5993f5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/658 Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-25board: Add Sony Ericsson J100I PhoneMathias K
This patch add the Sony Ericsson J100I Phone to the board configurations. Change-Id: I083ddf067c8ecdfdda0404fe9e9df980dbb86fe8 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/631 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-25config: Add TI Calypso CPU configurationMathias K
This patch add the TI Calypso CPU to the configuration files. Change-Id: Ieb462960391c4a2c630d7a83699c3b6e8162ace9 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/630 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-23jtag: fix osbdm.c typoBill Traynor
Fixing up tiny spelling error of "receive" vs. "recieve". Change-Id: Ib143d7fdb24ac1f2b7bd4ae90cadaf2e12760ff7 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/659 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-22jtag: fix opendous typoSpencer Oliver
Change-Id: Ia88c32f2394bde2048bdd73625e7664c93a9a87d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/656 Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-22jtag: remove opendous clang warningsSpencer Oliver
Change-Id: I0285c99507931e7d13aad36f4fc559c29a52faca Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/655 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-22stlink: check read_reg resultSpencer Oliver
Change-Id: I284824aa6f5eae8f6e910a482e9f7435e649fc0d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/657 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-05-21target: target.h typo and comment cleanupSpencer Oliver
Change-Id: Ib751803754672bf556f4f65bd3f5621f6bbb7f0c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/654 Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21target: enable TARGET_EVENT_EXAMINE_* eventsSpencer Oliver
Change-Id: I33efc0994b7bfe0faa2f4e8457fcc3c8e43d3571 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/635 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21target: enable TARGET_EVENT_RESUME_* eventsSpencer Oliver
Change-Id: I7d8378f9f34c6674db8c8b29d1a961389578e921 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/640 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21target: remove legacy target eventsSpencer Oliver
These events have been deprecated for a number of years, update any remaining scripts to the new events. Change-Id: Ic31ff388545ac8b3a500045699ca92c541b13f12 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/634 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21target: remove duplicate target eventsSpencer Oliver
Change-Id: Iba9ae441f3e6d48a7dfafe59ed093fef56a34723 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/633 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21target: disable armv6m unaligned memory accessSpencer Oliver
Change-Id: I42704cf80939ab9c9d4f402d2cd51c196e2fadb3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/645 Tested-by: jenkins
2012-05-21UserGuide: Updated list of supported interfaces, boards, and targets.Bill Traynor
User Guide: Chapter 6 'Config File Guidelines'. The directory listings of interfaces, boards, and targets has been brought up to date. Change-Id: I53f218a94cb81c5e90298b367259e833192af5f3 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/646 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-21build: add helper/types.h to config.hSpencer Oliver
this header is used in numerous files and adding to config.h simplifies its use globally. Change-Id: Id724a9950b90504721233022c7fb5768e9bc5548 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/649 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-21NEWS: add headline itemsSpencer Oliver
Change-Id: Ie78b0a171af76cf647deef501245caf54209d9f8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/639 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-21flash/nor/driver.h: typo fixChristopher Kilgour
Change-Id: Ie260f3c38b648e66958c014658bb6860171a7cc9 Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://openocd.zylin.com/653 Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-19stlink: add myself to copyright headerSpencer Oliver
Change-Id: I39e23b38ee630b80bccb5ff6b5819efa0fcb120a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/651 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-19stlink: remove superfluous stlink_usb.hSpencer Oliver
Change-Id: I34bc59b35fafd3fa659549e350b91310c5b33dd4 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/650 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-19contrib: enable cortex-m0 and cortex-m4 libdcc supportSpencer Oliver
Change-Id: Ib8ff645d1e5b8baca02de8ea95b629d88b203969 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/644 Tested-by: jenkins
2012-05-19remote_bitbang: fix native windows buildSpencer Oliver
Change-Id: Ied29ade0346c4595ffc1dafa788e2d5a595e0de3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/648 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-19remote_bitbang: missed closing brace in macro REMOTE_BITBANG_RAISE_ERRORAlexander Osipenko
Change-Id: I591308bd98810ef6361106c207c55b83c3a83890 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/647 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14docs: Fix incorrect -rtos option valuesPeter Stuge
Commit 9ca1592cb9fe4e61ee5bc327345fdfc254c9fe13 started on documentation for the -rtos option, but some of the documented values were incorrect so we'll clean up the mess here. Many thanks to Freddie Chopin for spotting this! Change-Id: Iaa633bd40ff5f75dd6a69e74e79dafc1643ee21a Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/642 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-05-14docs: add initial target rtos support infoSpencer Oliver
Change-Id: Idd39ce17922602aedd4626496ed8f5422bb76e07 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/641 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-14jtag: add opendous and estick supportSpencer Oliver
Change-Id: I49c25d226f05fdcaca6cbfc35c2ab47e8464abec Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/611 Tested-by: jenkins
2012-05-14stlink: add armv7m stlink handlingSpencer Oliver
This enables us to better handle some of the low level functions that the stlink does not support. It also enables us to share a few more of the standard cortex_m3 functions if necessary. Change-Id: I7a2c57450122012ec189245d8879d8967913e00e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/637 Tested-by: jenkins
2012-05-14flash: blank check use default_flash_blank_checkSpencer Oliver
Use default_flash_blank_check, this will use the much faster blank_check_memory handler if supported - 15x quicker on stm32f4. Otherwise it will fall back to using the slower default_flash_mem_blank_check. Change-Id: Ia231b3e95468c9e92594dbdbe1fa2d69e1506fc3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/632 Tested-by: jenkins
2012-05-14flash: fix protect check for pic32mx1x/2x familySpencer Oliver
Change-Id: Ib2692d8b79e52cd40f429008047494aa7f552984 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/612 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14jimtcl: update jim to fix make clean bugSpencer Oliver
jimtcl 0.73 has a issue when make clean is called. we have only included that fix as this is close to a release to update to jimtcl master. Change-Id: I5791ff32a98bd76e52feb9475605cbecf58420e5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/638 Tested-by: jenkins
2012-05-14stlink: fix stlink api2 single stepSpencer Oliver
This makes the newer v2 api behave as per the v1 api, eg. single stepping masks all interrupts. A better long term solution is to use same behaviour as a cortex-m3 target, see CORTEX_M3_ISRMASK_AUTO. Change-Id: Iaf9f9adf225cf274faaac938050bb996582aa98f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/621 Tested-by: jenkins
2012-05-14stlink: add stlink_api cmdSpencer Oliver
This enables the manual selection of the stlink api version. Change-Id: I0ec8c5b0a101b6456f426d2fec65971da56db4e7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/617 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14stlink: stlink/v1 use v2 api if supportedSpencer Oliver
The api v2 is supported on the stlink/v1 if it has a least v11 firmware. Change-Id: Idfdb5a7f5a5881326017451ae9b6004eeaa46a96 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/616 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14mips: support connecting under resetSpencer Oliver
Some targets support connecting while the target's srst is asserted. Tested on pic32 family. Change-Id: I0d20c40af6d031d1306043893e95e61f484c0a87 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/608 Tested-by: jenkins
2012-05-14Use hardware reset and connect under reset on boards with ST-LINK/V2, asFreddie Chopin
now it is supported. Change-Id: Id3b2ca9a2270974a5f453323f9057ecece400c94 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/609 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-14cfg: add stm320518-eval onboard stlink configSpencer Oliver
Change-Id: Ie92a87ce077c538fdd04af37c798e0a8054b423a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/610 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14stlink: support connecting under resetSpencer Oliver
Some targets support connecting while the target's srst is asserted. Tested on stm32 family. Change-Id: I1197dd721a1e1cbf95ee77dfd8e1082b165b22a9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/607 Tested-by: jenkins
2012-05-14cortex-m3: support connecting under resetSpencer Oliver
Some targets support connecting while the target's srst is asserted. Tested on stm32 family. Change-Id: I9df43623025e37832155aeee7aa099b844b85f16 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/606 Tested-by: jenkins
2012-05-14cfi: fix write_bank segfault with spansion flash on armv7mAurelien Jacobs
cfi_spansion_write_block() passes an arm_algorithm struct to target_run_algorithm() which in turn calls armv7m_start_algorithm() which expect an armv7m_algorithm struct. As armv7m_algorithm is bigger than arm_algorithm, when armv7m_start_algorithm() writes in the struct, it overrun the buffer, writting junk on the stack, which latter on generates a segfault. This patch ensure we use a properly sized armv7m_algorithm struct when the target is an armv7m. Change-Id: I4ab67c15ae4bb72454414a81b92a4231dcdb2239 Signed-off-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-on: http://openocd.zylin.com/623 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-14cfi: fix cfi arch check regressionSpencer Oliver
seems 9933fa334de551096674d4044ed7ac2152213e8b introduce a regression if the target was anything other than armv4_5 or armv7m. Just check that we have an arm target. Change-Id: I67c05138e5be2952ee92e9bfa15e1d050844462a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/615 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
2012-05-14cfi: check supported archSpencer Oliver
check that the cfi driver supports the current target arch. Change-Id: I8a95908684de67bf1657d1956f2573662a641cc1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/614 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
2012-05-14build: use generic name for arm_algorithm varsSpencer Oliver
This makes the code a bit easier to read as arm_algorithm can refer to other arch's, not just armv4_5. Change-Id: I78c99d40f34cda04e06f2daee75b48ff40a1d23d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/613 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-14build: add missing erase_check loader srcSpencer Oliver
Change-Id: I1534c1ea1606fda9eb6ffa6a11a708f8c8a3d46a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/605 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-14armv7m: update crc/erase_check loaders for cortex-m0Spencer Oliver
Use loaders that have been built for cortex-m0, making them usable for both cortex-m0 and cortex-m3 families. Change-Id: Ifd82be87eaec2cb96464290c80800cec3630d619 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/604 Tested-by: jenkins
2012-05-11contrib: fix Neo1973 udev permission typoSpencer Oliver
Change-Id: I6d5ad0cc28e0cb52104ead9e974b8b1ed92d9cdc Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/636 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-08flash: use correct stm32f0 flash size registerSpencer Oliver
The stm32f0 parts use a different address then the rest of the family. Add a function that returns the correct FLASH_SIZE reg depending on variant. Change-Id: Idb41580f7162f395b347cec034d6b745847326b7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/601 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-08cfg: increase stm32f0discovery board working areaSpencer Oliver
Change-Id: Iea166ee27fc60bbfdeb851fdcf71509f3984f72f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/602 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-08cfg: increase stm32f0 default working areaSpencer Oliver
The smallest stm32f0 has 4k sram, so use this as the default. Change-Id: I9097be9608da92b1b9da504e5bacc1280c86907a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/603 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-08cfg: Deleted duplicate busblaster.cfg and renamed original.Bill Traynor
The busblaster.cfg was contributed on April 23, 2012 and is a duplicate of dp_busblaster.cfg that was contributed on Oct. 23, 2011. Therefore, deleting the second version. Also, renaming the original dp_busblaster.cfg to simply busblaster.cfg, as this name is more concise. Change-Id: Iccb1f10f53dbbb248b1ff4c6295eaf67c32247c1 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/622 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 16:18:19 +0000