aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-10-02cfg: add ti ek-lm3s9d92 configSpencer Oliver
Change-Id: Ib09ca3e57de363a24d704b184ba8546bad08f56f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/853 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: add ti ek-lm3s8962 configSpencer Oliver
Change-Id: I753cec80a904130088b00b3f81b6dd61808662d6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/852 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02sysfsgpio: remove ignoring return value build warningSpencer Oliver
fixes following gcc warning: error: ignoring return value of write, declared with attribute warn_unused_result Change-Id: I96ea6649078449208a77690caea2cb237c388e6e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/854 Tested-by: jenkins Reviewed-by: Marc Reilly <marc@cpdesign.com.au> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: str9-comstick tested and workingSpencer Oliver
Change-Id: Ia6c45477381e78cb9508b4731438161e18be1f38 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/843 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: add STM32F3-DISCOVERY board supportSpencer Oliver
Change-Id: I4a02e0504fc04ffc1238d9bb77ec05c1f781e7e8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/810 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-10-02flash: add stm32f3 rev 2 flash supportSpencer Oliver
Change-Id: Ibab5112f5f70a609136d01ebc50530a334640d03 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/809 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect str9-comstick reset configSpencer Oliver
The str9-comstick uses a direct srst connection rather than via any buffer. As a result this fixes issues with the newer ftdi driver. Change-Id: I0968e8459997a6a2b7bf0c46e89662cd57b4f496 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/842 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02ftdi: incorrectly using output register for directionSpencer Oliver
fix a simple copy/paste bug. Change-Id: I5caaa4d16d30f26a453bd6a00c95261fd6e716c5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/849 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-10-02ftdi: correct ftdi_initialize error textSpencer Oliver
Change-Id: If230c0b5b3a18fd273106b743404079d0cbc9ddc Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/840 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02ftdi: fix adapter_init rclk fallbackSpencer Oliver
adapter_init expects jtag_get_speed (via ftdi_khz) to return a valid fallback speed if the adapter does not support rclk. The call was failing and so was the rest of the adapter init. The makes the new ftdi driver emulate the old ftdi driver. Change-Id: Ic7fac7d201241eb181e98f1ba7111f159731f6e0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/839 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect stm32f3 TAPIDSpencer Oliver
Change-Id: Id66d4e03a77c47a49086ee753bed01b3944064e1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/855 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-29Fix: Error while reading from USB endpointPeter Horn
This patch fixes the bug reported here: http://sourceforge.net/mailarchive/message.php?msg_id=28350157 When using Rlink under Linux, openocd exits with: "Error: Read of endpoint 2 returned -75, expected 17" The return value of -75 translates into EOVERFLOW. The cause is a wrong output buffer size argument passed to dtc_run_download(). Change-Id: I5d056705181ab6a6d4355524df06a0ea9c605961 Signed-off-by: Peter Horn <peter.horn@bluewin.ch> Reviewed-on: http://openocd.zylin.com/862 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-09-27jtag: remove libftdi enum-compare warningSpencer Oliver
See Trac #52 for details. Change-Id: Idb509ead2b51bfcceeb00d0224a4d1c395b28a04 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/801 Tested-by: jenkins Reviewed-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-27Add extra Coresight component ROM identifiers for the Cortex-M4Evan Hunter
Signed-off-by: Evan Hunter <ehunter@broadcom.com> Change-Id: Iaf2d69cf10c341d3a516986677f69a4389b29b1a Reviewed-on: http://openocd.zylin.com/841 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-09-26Added SPIFI flash driver, algorithms, and docsGeorge Harris
Added a flash driver designed to allow program/erase of memory-mapped SPI flash chips for LPC43xx/LPC18xx family micros. This driver includes three algorithms - erase, write, and SPIFI peripheral initialization (to allow memory-mapped access after a reset). The driver has been added to the flash driver table (drivers.c), and the OpenOCD documentation has been updated to include the flash driver configuration command. Change-Id: I79f4ff8f1f07de4e5f2fe4f8c23aeb903f868514 Signed-off-by: George Harris <george@luminairecoffee.com> Reviewed-on: http://openocd.zylin.com/783 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26SPI nor drivers refactorGeorge Harris
Moved common SPI flash driver code (device table, common commands) into flash/nor/spi.c and spi.h. Updated flash/nor/stmsmi.c to reflect this refactor. Change-Id: I141644b0af71d3835f29f06dd15b505a00e5b6ec Signed-off-by: George Harris <george@luminairecoffee.com> Reviewed-on: http://openocd.zylin.com/782 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26drivers: new jtag bitbang driver using sysfs gpioMarc Reilly
This driver implements a bitbang jtag interface using gpio lines exported via sysfs. The aim of this driver implementation is to use system GPIOs but to avoid the need for an additional kernel driver. A config suitable for RaspberryPi is included. Change-Id: Ib2acf720247a219768d1cbfeebd88057ed2d7b8b Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Reviewed-on: http://openocd.zylin.com/762 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-07Restore -dev suffix, archive NEWS file, add new blank NEWS file - startFreddie Chopin
new cycle for version 0.7.0. Change-Id: I549bd815b62292ea4da6ed5c445c7c8a55521d9d Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-07The openocd-0.6.0 release.v0.6.0Freddie Chopin
Change-Id: I72eeabfc704d2a979ac0b4492771690631d2300f Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-07stlink: issue error for stm32 option writingSpencer Oliver
The stlink interface currently does not support 16bit read/writes. Until a fix is included we issue a error that this is unsupported. Change-Id: I4552cf2bd3b29e90ecc905325b743c08e2b92d67 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/808 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-07flash: fix sam3 page read/write address computation errorChuen Chou
In at91sam3.c for Atmel SAM3 flash support, there are arithmetic errors in the functions sam3_page_read() and sam3_page_write(). Address locations are computed incorrectly due to an extra addition operation. This leads to memory locations being skipped during flash writes and reads. Smaller programs are written successfully into flash, with memory gaps, while larger programs of legitimate size fail because the skipped memory is not utilized and therefore unavailable. The changes address this condition, and have been tested with an Atmel SAM3X-EK evaluation board. Change-Id: I9ea3b9ed0130b71cbc32b2294e31a6a2bc71b47a Signed-off-by: Chuen Chou <zhouquan27@gmail.com> Reviewed-on: http://openocd.zylin.com/806 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-06configure: use consistent help textSpencer Oliver
Change-Id: I5e1d7c88e9310e6415f3663d7a657f516bd24660 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/803 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-06docs: add user mailing list and irc infoSpencer Oliver
Change-Id: I7000b5ab2967f8dc4cea8983978fce824ea1f98e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/807 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-06cortex_m: suggest using hardware srst if VECTRESET usedSpencer Oliver
If the target does not support SYSRESETREQ we fall back to using VECTRESET. This however does not reset the peripherals and we issue a warning to the user to suggest using a reset-init script. Also suggest that using hardware srst will give them the same functionality as using SYSRESETREQ. Change-Id: Ie1781c4b849fed66c52222e6539735537c879fb3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/802 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29Restore -dev tag.Freddie Chopin
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29The openocd-0.6.0-rc2 release candidate.v0.6.0-rc2Freddie Chopin
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29Pic32mx: make row programming work with any offsetSalvador Arroyo
In function pic32mx_write_block() if the parameter offset is not a multiple of row size the row offset (offset % row_size) will be ignored by the flash controller, shifting the code to the beginning of the row. Word programming gets it right. Change-Id: I134913e3d533688f791bbcb0c6e8983524197f3c Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/796 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29server: warn if user changes server port after initSpencer Oliver
So the user can view the current port number these cmds were changed to COMMAND_ANY. However this means that the user can also attempt to change the port number after init, even though this is not supported. Issue a warning that this is not supported. Change-Id: I3d20dcd81277e7d994240a8e314f27672ff760c4 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/788 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29stlink: fix typoSpencer Oliver
Change-Id: I5fe7b695b00faef966e7621614bbd60b6e694a4f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/800 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29stlink: improve swd hardware resetSpencer Oliver
Treat SWD wait result as success, otherwise hardware reset will sometimes fail. Change-Id: I0dbdbe9e75924fe0dde547a72883c60c3db7b15e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/799 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29ftdi: fix overflow if last field of a scan is emptyAndreas Fritiofson
The last bit of a scan is clocked during TAP movement so it's necessary for the last field to have at least one bit. Strip trailing empty fields and make sure the TAP is not affected if there's nothing to scan. Clients probably shouldn't add empty fields so add a debug message to be able to track and fix them. Change-Id: I27552568bc11146570b9b99ed8a1ae81b5fb2c50 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/794 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29mpsse: check available buffer space even for discarded data scansAndreas Fritiofson
When there's no data to scan in or out, we still use the clock data out command and fill the buffer with zeroes, so make sure the buffer is checked for available space. Change-Id: Ia6005c40c81f7fdb89379f1b5023fe383184d210 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/793 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29adapter: remove superfluous line breaksSpencer Oliver
Change-Id: I8e68b9d6f571ef7715a2f4cad0aa78fe4e3b48e8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/798 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29adapter: add 'adapter speed:' prefix to outputSpencer Oliver
Currently only the adapter speed is printed, which can be rather misleading when DEBUG_INFO is disabled, all the user sees is 6000 kHz instead lets print adapter speed: 6000 kHz Change-Id: I8f02a63f47344457e3c3d0a6774157fa18206440 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/797 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29Update NEWSFreddie Chopin
Added some missing items to NEWS file prior to final 0.6.0 release. Change-Id: I69255c85fa8f4b6f06eae7c56f78072e3ec2d6f8 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/784 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-08-29Add JTAG-lock-pick Tiny 2 config filesFreddie Chopin
DISTORTEC's JTAG-lock-pick Tiny 2 is a new interface using FT232HL chip and layout similar to KT-LINK. Change-Id: I2831b169cd448ca70397f2dd86c5b749dda3dabf Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/787 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-08-29Add another scripts search path for Windows buildsFreddie Chopin
Add single "scripts" folder to search path for Windows OpenOCD builds that don't use cygwin bin/openocd.exe scripts/interface/dummy.cfg scripts/target/at91eb40a.cfg Do some refactoring of current code (thx to Andreas). Change-Id: Idbb08d1368b06f25da44f4f9ab1511db992b1724 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/785 Tested-by: jenkins
2012-08-29kinetis: bugfix in kinetis_write() fallback pathAndreas Fritiofson
Offset calculation into buffer was wrong and code would read outside buffer if count was not a multiple of four. Change-Id: Ied625b10221423d5a5f25d27ce1edd8c2c3eca8a Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/749 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29kinetis: ensure flash writes are not truncatedChristopher Kilgour
The number if longwords or "sections" (Freescale term) written for a Kinetis flash write (4, 8, or 16 bytes depending on the part density/granularity) are now rounded up to ensure there are no truncations when the desired write is not a multiple of the minimum write size. Change-Id: I8db40a8769d8ac5393a46cbf4e5ff0df82faf916 Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://openocd.zylin.com/738 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29jtag: fix clang ulink memory leaksSpencer Oliver
Memory leaks discovered by clang 3.1 Change-Id: I8a784ba9726deac508424eddb27e9c8409e2773f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/795 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29Patch: Make pic32mx unlock work at higher scan frequenciesSalvador Arroyo
For example in a pic32mx220, pic32mx unlock don't work if adapter_khz is set to 5000 or more. A short delay after asserting reset fix the problem. Change-Id: I62e493edfcea585c36c8de77a969cebac7227b96 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/790 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29cfg: update for target's that support cortex_m AIRCR SYSRESETREQSpencer Oliver
If the target supports SYSRESETREQ make sure we use that as the default if srst is not fitted/configured. Change-Id: I24c907493134506320e69c1218702930629c1cdc Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/792 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29stlink: stlink_interface_init_target use hex prefixSpencer Oliver
Change-Id: I782da74687bcf111c1f04c53b2c1120d6a034441 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/791 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29arm7_9: Fix broken halfword/byte memory readsAndreas Fritiofson
Always scan out all bits, but make sure only the allowed number of bytes end up in the caller-provided buffer. Discard the rest by adding another scan field when size < 4. Rewrite the endianness callback to avoid reading outside allocated memory. Make it directly usable as a callback without the need for a wrapper. Move the shared callback to a more suitable home in arm7_9_common. This fixes the regressions introduced in commits 991ed5a2b657e660f744eefddb084724e52938ea cb90d32e386a7489d31136997209c61e9559ff5e and c3074f377c1da33ca8ba8493826e1b52351eebc6 Change-Id: Ia8bde8c5a9844e89a1d6c0bc8534cd26f02f8d11 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/789 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24Severe bug in Pracc codeSalvador Arroyo
The function wait_for_pracc_rw() fails if Pracc bit is 0. The variable ejtag_ctrl is loaded with the content of the control register in the first scan. In the second scan Pracc bit is scanned out as 0, letting the proccesor go. The result is unpredictable. All the strange data corruption when scanning at certain frequencies, or the strange delays needed when entering or leaving fasdata area are retated to this bug. Now the code works at any scan frequency, tested up to 15000Khz and indepently of processor speed, tested at 31.25Khz and 4/8Mhz. Change-Id: Iedfd81d06d6af4bc738a521f720e42323025b268 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/769 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24target: remove unused working area 'user' fieldSpencer Oliver
working_area::user has never been used so lets remove it. Change-Id: I1200311b34248549c1fe30c9f675e6129b7bebee Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/781 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24cfi: fix type-punning warnings in cfi_spansion_write_blockAndreas Fritiofson
Retest the condition when needed, instead of abusing the common_magic field as a flag. There are only two options here. Either it's an armv7m or it's another arm. is_arm(...) will return true even for armv7m, so it's imperative to check in the right order. Change-Id: Ic227f19f7babf1b0b0fe075f9a3abc4eabc7d5f1 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/779 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24build: fix clang warningsMartin Nowak
Change-Id: I3c6a63a18034535f0a8c2c62ba8a708f09d7839b Signed-off-by: Martin Nowak <dawg@dawgfoto.de> Reviewed-on: http://openocd.zylin.com/765 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24target: catch dap_lookup read errorSpencer Oliver
Issue found by clang-3.1 Change-Id: I2e922ec83117e75db5bec1e82edaa75a9e6e7464 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/778 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24flash: remove lpc2000 clang warningsSpencer Oliver
By Initialising the param_table we remove the clang warning's. We are also make sure we are not passing any rogue values to lpc2000_iap_call. Change-Id: Idb3b0077d1dae5f03dedab1d46d01140fe9ffb10 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/777 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-18 19:35:20 +0000