aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-02mips: code cleanup in cp0 command handlersSalvador Arroyo
After calling mips32_cp0_read() nothing has been queued, the call to jtag_exec_queue() is unnecessary. Change-Id: Ie25438045a8e9b6b1b170df7b52609d45f284b5a Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/1190 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-04-02mips: change in restoring debug working registerSalvador Arroyo
In current devel code there are 3 functions (related to m4k code) that need to restore register 8 from pracc stack: mips32_pracc_read_u32() mips32_cp0_read() mips32_pracc_write_mem_generic() And mips32_pracc_read_mem() needs to restore regs 8 and 9 from pracc stack. Values in this registers should be the same as read by mips32_pracc_read_regs() when entering debug mode and can be modified by mips32_pracc_write_regs() when leaving debug mode. There is no need to read their values from the processor registers every time. The fields reg8 and reg9 are added to struct mips_ejtag to store these register values and the call to mips32_save_context() is shifted in mips_m4k_debug_entry() in order to store them before any other function needs to restore these registers. For the same reason in function mips_m4k_step() the call to mips_m4k_set_breakpoint(), if needed, should be made after calling mips_m4k_debug_entry(). For single word write the number of pracc accesses are now 9 or 8, from 13 or 12 in current code, single word read takes now 10 instead of 12. This patch is really the first in a set of patches for an alternate m4k pracc code much faster that current code. At least for me with pic32mx works fine. Change-Id: Ibd9df5e8b9f78ce05a180949ba6a561c761b61d6 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/1146 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-04-02mips: mips32_pracc_fastdata_xfer() little modificationSalvador Arroyo
In this function after loading the handler code and the jump code there is a call to wait_for_pracc_rw() to verify that a pracc access is pending. Next the address is read to verify that the handler is running, the address should be at fastdata area. Next, another call is made to wait_for_pracc_rw(). This call is not needed, we now already that a pracc access is pending. Better we call this function before loading the end address to be sure it is loaded correctly. Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Change-Id: If311450ea634786fc28cf1a8e18ed24ce5257d20 Reviewed-on: http://openocd.zylin.com/1142 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-04-02pic32mx: 0 wait state optionSalvador Arroyo
By default pic32mx starts after any reset with 1 wait state for RAM access/exec. It can be changed to 0 wait states by clearing the BMXWSDRM bit (bit 6) in BMXCON register. With 0 wait states near doubles the execution speed. CRC check sum can be done much faster increasing verify_image speed. Fast data transfer also works with a bit higher scan rate, up to 1500 Khz. This option can be set at any time with mww 0xbf882004 0x40 or cleared with mww 0xbf882008 0x40. Some numbers for FTDI/HS with current devel code and a elf file: Core clock / wait states verify_image speed ------------------------------------|------------------------------ 4 Mhz / 1 21 KiB/s 4 Mhz / 0 36 KiB/s 8 Mhz / 1 37 KiB/s 8 Mhz / 0 57 KiB/s Change-Id: I4092ad0f3753f72f77108718d0ed3a3ab84e3b23 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/1141 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-04-02pic32mx: false pending at low core clockSalvador Arroyo
To show up the fail try to step with the core clock set to 31.25Khz and with a ftdi/hs adapter or with a wiggler, -not with ft2232-. The scan frequency should be set to 300Khz or higher, at lower frequency probably will not fail. The code exits with error because the pracc address is at 0x0. It also fails when using the "all" register, but in this case the code works without any message because the pracc address is at 0xff202004 when it fails. I never saw this fail with the core clock set to 500Khz or higher, but ... The workaround simply puts a 1 ms delay after the execution of the DERET instruction. Change-Id: I38e8c01a9c39aedd3282140543b83a0844d8ad29 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/1139 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-04-02Added support for ARMv7-M in arm io.Henrik Nilsson
Added support for ARMv7-M targets in arm_nandwrite and arm_nandread. Change-Id: Iab1d78d401f735e191c6a8519f3619035a300fae Signed-off-by: Henrik Nilsson <henrik.nilsson@bytequest.se> Reviewed-on: http://openocd.zylin.com/1188 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-02Add abort when JTAG-DP transaction times out.Evan Hunter
Fixes system hang for devices that don't ignore transactions to bad addresses. Change-Id: Ia98344d7efc12951ef79dbc82b8f792b70a22cee Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/1115 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-04-02arm_adi_v5: fix mem_ap_read_buf_u32() JTAG nastiness..mike brown
Moved JTAG code out of transport-neutral file (arm_adi_v5.c) into transport specific file (adi_v5_jtag.c). Added ap_block_read to dap_ops interface (arm_adi_v5.h) to support the move. Change-Id: I796d3984f138aad052b97c77ac9c12ffd1158f74 Signed-off-by: mike brown <mike@theshedworks.org.uk> Reviewed-on: http://openocd.zylin.com/1277 Tested-by: jenkins Reviewed-by: Michel JAOUEN <michel.jaouen@stericsson.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-04-02gdb server: Fix buffer overrun - sprintf appends a terminating null to the ↵Evan Hunter
data which was overrunning the supplied buffer. Fixes regression introduced in commit 07dcd5648d146d38f9ffa619f0737587e592d0b6 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Change-Id: Iec64233c0da5a044fb984c4b1803309cb636efe9 Reviewed-on: http://openocd.zylin.com/1312 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-31ti_icdi: add icdi_usb_query result checkSpencer Oliver
Change-Id: I0b40586677a77ee6ae46fe120a677616bde22d1e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1279 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-03-28docs: update incorrect urlsSpencer Oliver
These were missed when git was moved to the new SF platform during Nov 2012. Change-Id: I7b4ae9dea010d95f9bf4c26841b5b724f41768be Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1248 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2013-03-28docs: remove unnecessary whitespaceSpencer Oliver
Change-Id: I11bad3de145d941b61e9bd4920bc3281ece91ab3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1245 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-03-28docs: fix html anchor xref linksSpencer Oliver
makeinfo has a long outstanding bug that means @anchors are not correctly formatted for split html, see: http://lists.gnu.org/archive/html/bug-texinfo/2012-06/msg00000.html The issue relates to using spaces or hyphens in the @anchor name. Issue also reported via Trac #44 Change-Id: Id72e23375dd167674b2ae5b314e8242b90a72a5f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1244 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-03-24at91sam3: Wrong PLLA frequency calculationsThomas Schmid
The command 'at91sam3 info' ignores PLLA DIV values >1. This patch fixes it. Tested on a SAM3S4C chip. Change-Id: I051f41bb3dcefe1ac785fbcb48477a807daa16a2 Signed-off-by: Thomas Schmid <thomas.schmid@gmail.com> Reviewed-on: http://openocd.zylin.com/1307 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-03-24rtos: fixed handling of qThreadExtraInfo packetsChristian Gudrian
The commit "gdbserver: use common hexify/unhexify routines" [3d62c3d] mis-replaced a call to "str_to_hex" with a call to "unhexify". "hexify" should have been used instead. Change-Id: I5f5904b1b422f819a6308e2c0740ea43d22c7d0b Signed-off-by: Christian Gudrian <christian.gudrian@gmx.de> Reviewed-on: http://openocd.zylin.com/1308 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-03-15target: fix broken Cortex-R4 supportSpencer Oliver
This regression was caused due to the recent addition of R4 support and the removal of the bulk_write_memory handler. Change-Id: Ide692737f235c0e9906becb6f3502ba52c5907aa Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1246 Tested-by: jenkins
2013-03-15target: Retire target_bulk_write_memory()Andreas Fritiofson
The only caller was arm_nandwrite(). Replace that call with target_write_buffer() instead, which in turn may end up calling the same bulk_write_memory target API function. Change-Id: If34c7474df5cf14af3b732fb4774816818f28e79 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1214 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-15target: Add default implementation of bulk_write_memoryAndreas Fritiofson
Remove dummy implementations from all targets except arm7_9 and mips, which are the only ones with real implementations. Replace with a single default implementation simply calling target_write_memory(). Change-Id: I9228104240bc0b50661be20bc7909713ccda2164 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1213 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-15arch: Added ARMv7R and Cortex-R4 supportEvan Hunter
Rewrite to merge Cortex-A and Cortex-R code Change-Id: I4541557980d43d1bba6e8d1bfeb04f536ed25a00 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/358 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-15adi_v5: search for Debug and Memory AP supportEvan Hunter
Adds dap_find_ap() function. Change-Id: I6643025624009b12d4936de67a605da52c07be49 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/909 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-15cortex_a : optimize apb read/write access.Evan Hunter
Rewrite: Adheres more closely to 'fast read/write' examples in TRM. up to 50x faster Change-Id: Ieb4da57d8367628f3e7306827a5b1f0ab550e641 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/903 Tested-by: jenkins Reviewed-by: Michel JAOUEN <michel.jaouen@stericsson.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13jtag: add support for some probes that are mostly compatible with opendousStefan Mahr
This patch adds support for usbprog-jtag and usbvlab that are mostly compatible to opendous except for IN and OUT endpoints and usb transfer mode. Change-Id: I44557c2449fe7473295038efa6ae4fc8d80ec7bf Signed-off-by: Stefan Mahr <stefan.mahr@sphairon.com> Reviewed-on: http://openocd.zylin.com/687 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13jtag: usb_blaster: fix allocation of usb_blaster_device_descStefan Mahr
usb_blaster_device_desc was allocated, but never freed. Change-Id: I764bd092c71b8c260b98aab0e7a1710fd7bfa9fd Signed-off-by: Stefan Mahr <stefan.mahr@sphairon.com> Reviewed-on: http://openocd.zylin.com/1224 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins
2013-03-13jtag: parport: avoid freeing read-only memory sectionStefan Mahr
If command parport_cable is not executed, parport_cable points to const char array in read-only memory as default. On exit free() will try to free this read-only memory. This patch uses strdup to allocate memory when defining default setting. Change-Id: I290e707ac6a37e9dc1b45c85ca51d8bd6aac6761 Signed-off-by: Stefan Mahr <stefan.mahr@sphairon.com> Reviewed-on: http://openocd.zylin.com/1223 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13jtag: opendous: fix tap buffer overflowStefan Mahr
Appending bits to TAP buffer doesn't check if there's enough space left. This patch adds this check to fix TAP overflow error. Change-Id: If80d5ab4a24983ad24f3cab31f9676d1590ebf5d Signed-off-by: Stefan Mahr <stefan.mahr@sphairon.com> Reviewed-on: http://openocd.zylin.com/1216 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13target: Remove read_memory_impAndreas Fritiofson
Change-Id: Idc6ef3b075ccbb5945df8fea746011cb17175d8f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1219 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13target: Remove write_memory_impAndreas Fritiofson
Change-Id: I5d933bc19443bba8a0193c90471fdd0614324a92 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1218 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13target: Remove soft_reset_halt_impAndreas Fritiofson
Change-Id: I12c907584ef73de570eba2dcfeb8477cabc6098f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1217 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13doc: opendous interface based on ft2232HRodrigo Melo
It was listed in the ft2232 based cables supported. Moreover, the ft2232_channel option, which was added to support this cable, was explained. Change-Id: I82ebc7bc10d6472f96ab150e78d623a617edccd2 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1098 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13interface: opendous_ftdi config file addedRodrigo Melo
This config file add support to the opendous cable based on the chip ft2232H, using the ft2232 interface driver. Change-Id: I8171a0c475af8d61e081844ee86466a392138fb0 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1096 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13ft2232: ft2232_channel option addedRodrigo Melo
With this option a different channel of the ft2232 chip can be selected using a previously existing layout. It was made for a partner called Salvador Tropea. Change-Id: Ia0dedb2f50e232d089e73788735edc8f47ee23e6 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1095 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13doc: Added MIPS target documentDrasko DRASKOVIC
This document explains MIPS EJTAG operations implementations within OpenOCD. Change-Id: Ieaf01f8bc5a97d7b0f2c847bac5fbb2ccf8ba088 Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com> Reviewed-on: http://openocd.zylin.com/904 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13Kinetis: Flash command function matches datasheetAlex Austin
The kinetis datasheets specify the flash registers as bytes rather than as words, as the previous implementation did. This also makes a few code sections slightly less endian-magical. Change-Id: If8f4adfc7f4341085ae5b6eacbf7d74bbd74cf08 Signed-off-by: Alex Austin <alex.austin@spectrumdsi.com> Reviewed-on: http://openocd.zylin.com/1192 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13Kinetis: Symbolic names for Addresses and CommandsAlex Austin
Change-Id: I2165b66c37bd1608139b5dd00f48124161e13ef0 Signed-off-by: Alex Austin <alex.austin@spectrumdsi.com> Reviewed-on: http://openocd.zylin.com/1191 Tested-by: jenkins Reviewed-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13docs: add gerrit http password urlSpencer Oliver
Add url to show where the http password is configured. Also add note that password can also be saved to url git config. Change-Id: I3c1a022580e5f73372b0c50e8d1d2f0b1498966f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1207 Tested-by: jenkins
2013-03-12tcl: add flash programming helperSpencer Oliver
This adds a program proc that simplifies using OpenOCD as a standalone programmer. Change-Id: I6ece492cd878c170b734e8bb2e09fe8c4557d5a6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1199 Tested-by: jenkins Reviewed-by: Jörg Fischer <turboj@gmx.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2013-03-12rtos: fixes warningØyvind Harboe
Change-Id: I45db15b16b52c71009d8830985f42ac88eabe160 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/1209 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2013-03-07gdb: use stdio functions to convert parametersSpencer Oliver
This reduces the number of gdb conversion routines we have to maintain. Change-Id: Ia43d6cac86cbe4f76fe0875b9d9c16ac340296db Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1128 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-03-07interface: opendous_ftdi config file addedRodrigo Melo
This config file add support to the opendous cable based on the chip ft2232H, using the ftdi interface driver. Change-Id: I4491f99d7b14f7078a04583ef0c4acd8692c4349 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1097 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-07docs: use doxygen keywords for formattingSpencer Oliver
Rather than use bold fonts etc, use the correct keywords so doxygen formats better. Change-Id: Id9d63f0fc3465665376d7a536c4d6da71998f40e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1210 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2013-03-06cfg: add Netgear DG834v3 configurationSpencer Oliver
Change-Id: I3f4880d8b07b9623544b94d316b37e6d0ae97020 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1189 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-03-06flash: fix stm32 failed probe using incorrect flash sizeSpencer Oliver
This fixes an issue if the device is manually probed after the initial probe fails due to being unable to read flash size register. In this situation the driver assumes the user has overridden the flash size when infact this may not be the case. It also seems on the older stm32f1 devices the flash register is not readable when locked, this does not seem to apply to the newer parts - f0, f3, f4. Change-Id: I125f872fcb2d962ca6705f97b62d957e2b31303b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1187 Tested-by: jenkins Reviewed-by: Johan Almquist <johan.almquist@assaabloy.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-03-06stm32: update stm32f1x driver for f0x and f3x option bytesSpencer Oliver
The stm32f0 and stm32f3 share the same option byte location, but the format differs. Adding an option_offset fixes the broken options_read cmd and incorrectly setting Hardware Watchdog when unlocking a f3x device. Change-Id: I82d66b6198294ea9eedb44ca8b2fb368c0cb15e8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1184 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-03-06ti-icdi: catch failed icdi_send_cmdSpencer Oliver
warnings detected by clang. Change-Id: I1532bcc12a8ab7446646dfb2a7afa8894ff03679 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1180 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-03-06cfg: add basic support of Freescale i.MX6 series targetsVladimir Zapolskiy
This change adds a simple target configuration for Freescale single/dual/quad core i.MX6 SoCs, only one core is configured by default. Change-Id: I853dd27f4c6765b7f731be2ddea82e85d496c6a4 Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-on: http://openocd.zylin.com/1135 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-06target: use common target_name to access target::cmd_name memberSpencer Oliver
Change-Id: I203b89ef25a072c3b00b504483d5f2a83477fad6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1182 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-03-06speed up ftdi by reorder to out-inPeter Henn
When the ftdi driver calls finally the mpsse_flush function, it first initiate the USB in and finally the corresponding USB out transaction. Because data in is requested too early the USB device will always answer the first USB in by a NAK. That can prevented by a simple reordering of the out and then the in transfer and can improve the Jtag performance for high JTAG clock rates. Change-Id: I17abf1487c914c92e2e447ee6d30562ef629f327 Signed-off-by: Peter Henn <Peter.Henn@web.de> Reviewed-on: http://openocd.zylin.com/942 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-03-05Change reset configuration.Mathias K
This patch change the default reset config from SYSRESETREQ to the working VECTRESET. Change-Id: I21a9a74b9c0c68cfa3a6e6dac9b123acc98a93cb Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1186 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-05Move back off timer to target structMathias K
Move the global target back off timer to the target struct. This will fix the wrong error handling with multi target devices like smp systems. Change-Id: Ia327182ed5d13ca87323700017a8c40ecc6b25a3 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1179 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-03-05Add the target name to debug output for better understanding and error ↵Mathias K
identification. Change-Id: I1054debea6cd3a6548aadeae2d84000a0039814e Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1178 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 23:26:07 +0000