aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-31dsp563xxx: fix missing error propagation found by clangØyvind Harboe
Change-Id: I7380ce145b4942e21b174f2a810928a877c32bc7 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/140 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-30interface configs: Fix whitespace and other issues.Uwe Hermann
Change-Id: I98825c7fb9bdee75b69b06005ed12a3f64ec4db4 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/139 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-30config files: Drop incorrect comments.Uwe Hermann
There are many "force an error till we get a good number" comments in target/board files. This refers to the use-case where a config script sets _CPUTAPID to 0xffffffff (which presumely gets overridden later): if { [info exists CPUTAPID ] } { set _CPUTAPID $CPUTAPID } else { # Force an error until we get a good number. set _CPUTAPID 0xffffffff } However, the same comment was also copy-pasted in many files which do _not_ set _CPUTAPID to 0xffffffff, where the comment doesn't make any sense at all. Drop those comments. Also, add one missing comment, and fix small whitespace and grammar issues. Change-Id: Ic4ba3b5ccba87ed40cea0d6a7d66609fbdfa3c71 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/136 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-29clang: fix warning by adding assert that shows that a variable is usedØyvind Harboe
Change-Id: I26e0ba9f1ae9d43c9a14c42c4225746782dc4d66 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/134 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-28Fixes comment typo for page sizeJonathan Dumaresq
Change-Id: I6dd8aadcecd680c48e696aeec0daf74d2addbb05 Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-on: http://openocd.zylin.com/132 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-27bugfixes: numerous bugs in error propagation found by clangØyvind Harboe
Change-Id: I784068325b422d1918e28c08544bc5a1332d712f Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/130 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-27clang: fix warning about missing check for return valueØyvind Harboe
Change-Id: I0c6b6b8d1f0c30b6a503cb98df30584252bc0ee1 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/129 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-27Remove use of undefined variable.Jim Norris
Change-Id: Id8fd345438c360b2a42857525f05360ce2794d21 Signed-off-by: Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/127 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2011-10-26clang: fix warning about use of unitialized variableØyvind Harboe
this was a false positive, silence it. Change-Id: I432e0c466c94cf8fd6bbf0ea153c8501a8a261eb Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/126 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-26Add configuration for ATMEL SAM3N-EK board.Jim Norris
Change-Id: I525f6c346cace4e54f47659c5a7aceb29ee4baf2 Signed-off-by: Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/125 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-26Add configuration for ATMEL SAM3N series.Jim Norris
Change-Id: Iac498ab37e59127b989f29a1c4167ab29d625b05 Signed-off-by: Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/124 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-25stm3220g_eval.cfg: fix CHIPNAME.Marti Bolivar
The STM3220G-EVAL board has an STM32F207IGH6. ("...H6", not "...T6"). Change-Id: Iaf3dae6830c5c0685a1dcd1588d391434bc51be7 Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com> Reviewed-on: http://openocd.zylin.com/120 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-25armv7a: fix scan-build warningsAndreas Fritiofson
"Value stored to 'retval' is never read": Check and propagate error "Dereference of null pointer": Probably bogus, maybe triggered by the null check on armv7a, so remove the check since it can't be null anyway. Change-Id: I3bc44e52af1589ff40e6a42deda0ce7f3a25e397 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/119 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-25armv7a: make local functions staticAndreas Fritiofson
Also fix a spelling error and remove the declaration for a non-existent function from the header. Change-Id: I13177e2d81aa167c05c1cc766f06924211e6d735 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/118 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-25armv7m: improve error handlingAndreas Fritiofson
Propagate errors unchanged. Free allocated working area in the error return path. Remove duplicated cleanup code by rewriting the logic. As a side-effect, fixes a scan-build warning. Change-Id: I80e3c0015be672778f916e998c8c2e4f23d7588c Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/117 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-24Fix "Evaluate 'script' in the global scope"Freddie Chopin
This fixes commit Evaluate 'script' in the global scope. It caused Windows builds behave differently than before because path was evaluated twice and backslashes from Windows' paths got unescaped and effectively wiped out. Configs could only be passed with "-f ../dir/config.cfg" or "-f ..\\dir\\config.cfg" instead of usual "-f dir/config.cfg" (or using backslash) as previously. Change-Id: I13b4abac6dbe6d770cc11a4e61c9421ef340da83 Author: Steve Bennett <steveb@workware.net.au> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/40 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-24warning: silence gcc by initializing local variablesØyvind Harboe
GCC doesn't understand that these are in fact initialized if they are used. Change-Id: I01988adb0547f785b48d869ddbe44cc17dca4739 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/116 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23SERVER: fix clang warningAntonio Borneo
The fix is inline with the Linux coding style that forbids assignment in if condition Change-Id: I0b9d0b419d9c8b7a8c755e048d5faf72d1658ba2 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/87 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23cfg: Add interface config for Dangerous Prototypes BusBlasterRichard Barlow
The BusBlaster from Dangerous Prototypes is based on the FTDI FT2232H IC. It has a CPLD between the FT2232H and the JTAG header allowing it to emulate various debugger types. It comes configured as a JTAGkey compatible device. Change-Id: Iab56907bf67ded87001e628d93012f1e16287d90 Signed-off-by: Richard Barlow <richard@richardbarlow.co.uk> Reviewed-on: http://openocd.zylin.com/53 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-23NOR/CORE: fix clang warningAntonio Borneo
The fix is inline with the Linux coding style that forbids assignment in if condition Change-Id: I10338a249bcfeff87d8596f7e17f209e26b41678 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/86 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23NAND/CORE: fix clang warningAntonio Borneo
The fix is inline with the Linux coding style that forbids assignment in if condition Change-Id: I42a371d6adfdf3b3fb867705211c47d89776ee2a Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/85 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23FLASH/CFI: fix clang warningsAntonio Borneo
Total of 5 warnings: 3x "Dead store": removed dead assignment to variable; 1x "Dereference of null pointer": this is not an error, but a limited visibility of clang, since pointer erase_region_info is initialized inside cfi_fixup_non_cfi(); 1x "Branch condition evaluates to a garbage value": this is a real coding bug that could issue SIGSEGV, since "goto cleanup" can be executed before initialization of "source". Change-Id: Id3c323c82bb15cbd3bb8fc04b23541f11145f109 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/84 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23mx2: add error propagation and remove warningsØyvind Harboe
Change-Id: Idd4fb452790e5d7921a749679dbd865586e5a4a9 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/48 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23fm3: fix warning for superfluous assignmentØyvind Harboe
Change-Id: I4f8e8c2e676a2728ddc6227daf9ca6a7ceb3d505 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/46 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23kinetis: fix warning about malloc(0) w/assertØyvind Harboe
Change-Id: Ib40204675bfc5429c744f9ed7e2f7098384b753d Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/47 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23tms470: remove dead assignment warningØyvind Harboe
Change-Id: I21e7ac47f80d93c9c0d7b169f8848b929c664b20 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/45 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23add Freescale Kinetis K40 devices and Kwikstik eval boardMathias K
Change-Id: I4817921d09ab915c50f42651bc073690033450fe Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/51 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23clang: fix warning w/assert so that clang knows that there will be no ↵Øyvind Harboe
division by zero Change-Id: I98ac62a22f21043bb535a667a4f1f1537ccde2a4 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/42 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23clang: fix malloc() warning with assertØyvind Harboe
Change-Id: I989d2655622a9f11f4a0a2994014e42822587ecd Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/41 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23tms470: removed unnecessary operationsEdgar Grimberg
This should silence a warning. Change-Id: Id91a9ebacae836083b1db2654a8e7bf24b2300e9 Signed-off-by: Edgar Grimberg <edgar.grimberg@gmail.com> Reviewed-on: http://openocd.zylin.com/52 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-22FLASH/STMSMI: fix clang "dead store" warningAntonio Borneo
Change-Id: Icfdefdc48432db2057d3fea19dc424571d2385eb Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/50 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-22buspirate: ignore return value and fix warningØyvind Harboe
Perhaps we could do one better and propagate the error? Change-Id: Idc45f516c26f09de4ee01fe05e8d3475f4b80db3 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/43 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-22warning: fix false positiveØyvind Harboe
may be used uninitialized in this function [-Werror=uninitialized] Change-Id: Ida2cf8efe4e7da6fd9f669b806a20894563ac3d4 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/49 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-22server: remove warning due to dead assignmentØyvind Harboe
Change-Id: Idb08aef0c11b3fae92286e8fcea61ab09ab09e74 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/44 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2011-10-21jim: add missing jim licenseSpencer Oliver
Change-Id: Ib8e34739d92cd54655b9b47d07b856a82ff25f3c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/39 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-20rtos: remove broken code for handling the deprecated qP packetAndreas Fritiofson
Change-Id: Icca522c1e2a2877abb20665b171c61079b1d8f48 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/37 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-20rtos: return the correct value if the T or H packets are handledAndreas Fritiofson
Change-Id: Iea31e20ee4e35c1a9cb7b93424c92b3f38081067 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/38 Tested-by: jenkins Reviewed-by: Evan Hunter <evan@ozhiker.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-19Unused variablesFreddie Chopin
Fix a few errors with set and unused variables detected by GCC 4.7.0 Change-Id: I59b748e18e514ee9f0cde7883b4ed5116198bd4a Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/36 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-19Updated fm3.c, added Flash type 2 support, error handling improvedMarc Willam / Holger Wech
Change-Id: I684aca11c4554290d0e57c6d3318d8082980c1ef Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net> Reviewed-on: http://openocd.zylin.com/10 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-19TMPA900/910 MCUs are always little endian.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Change-Id: I8839f2cf0faf1b5ba9f99901c5ee028b199fabd2 Reviewed-on: http://openocd.zylin.com/35 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-19Toshiba TMPA900 config: Fix incorrect working area.Uwe Hermann
The Toshiba TMPA900 series (TMPA900/901) only has internal RAM regions RAM-0 (16kB) and RAM-1 (8kB) which we can use as working area. This is probably a copy-paste error from tmpa910.cfg, which has the correct values and sizes for the TMPA910 series (TMPA910/911/912/913): there are RAM-0, RAM-1, and RAM-2 (each 16kB). Also, change "built-in RAM" to "internal RAM" to match what the datasheet uses. Change-Id: I993cd6b7fadc28cf34e5cc18426bb2bb42597670 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/34 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-18xscale: fix bug in xscale_receive()Matt Reimer
The code in xscale_receive() that tries to skip invalid reads (i.e. reads that don't have the DBG_SR[0] 'valid' bit set) seems to be wrong, as it only looks at the first word's valid flag rather than each word's own valid flag. Am I reading the code correctly? If so, the attached patch should fix it. If this looks correct, I'll generate a proper patch and commit message. Matt Change-Id: I74ebe2ad7a36d340a9dd3b8487578b6ea7f3cf1e Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/32 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-18luminary: add new targetsSpencer Oliver
update target support from latest SW-DRL 8049 Change-Id: I40aba4d30fe2b79fd955f466c64d99a1dfd63ecf Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/31 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-18luminary: add peripheral reset scriptSpencer Oliver
some luminary device classes require a reset script to emulate a hardware reset. Change-Id: Id505c92451244b48b0238c2130aebab2df8d208b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/30 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-17AM/DM37x: Use ICEPick warm reset and include halt when gdb connects.Karl Kurbjun
Using the ICEPick reset seems to allow the processor to be halted sooner and the halt on gdb connection makes the connect process more robust. Change-Id: I0586f6e6becc60a729030509ef58907a19d545ec Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/23 Tested-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-17ICEPick-C: Add support for warm reset through JTAG controller and provide ↵Karl Kurbjun
finer detail functions. This sets up simple functions that can later be used to provide additional ICEPick Operations. Change-Id: I313b8679267696fad87d23f3692963e513f2fe21 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/22 Tested-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-17Add the SAM3N familly to the chip_details tableAttila Kinali
Change-Id: Ic122d324eacf6e667ed6008ebb84708be944222c Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/29 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-17target_request: add target_got_message() that can be used to improve DCC ↵Øyvind Harboe
performance API change to allow implementing a back-off algorithm for polling hardware. Change-Id: I6cbe8b4534c8dfeb8442305171ea96b5481c1f17 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/26 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-17target: DCC / target message backoff algorithmØyvind Harboe
by immediately polling again when we have received a message from the target instead of waiting 100ms, we can hope for much better performance. More than 100x? :-) Change-Id: Ieaf0c6c8b6e5addc482895670ffbf9a743e07a29 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/27 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-15Add some more detail for setting up Gerrit account.Jim Norris
1) Add a couple more steps when setting up the Gerrit account. Change-Id: I5d81feac4650d4d28653d14cfc0baf14270424c1 Signed-off-by: Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/28 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: Peter Stuge <peter@stuge.se>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 16:22:54 +0000