aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-06-26topic: flash: description/id added for ATSAM3SD8CMike Crowe
New flash description for ATSAM3SD8C used on SAM3S-EK2 development boards. Name used is "at91sam3sd8c" and chipid is 0x29ab0a60. Mirrors description of other similar parts. Change-Id: I7fc4b82e7969451645ab067223663f08b76d866b Signed-off-by: Mike Crowe <mpcrowe@gmail.com> Reviewed-on: http://openocd.zylin.com/684 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26J-Link: Initialize .transports to suppress warning.Alexander Osipenko
jtag_interface.transports field was left uninitialized, which triggers warning message on program startup. Although hardware natively supports SWD interface, no software support currently present, so the value choosen to be <jtag_only>. Change-Id: I2da41790b1850950af416cec4362d5b7bf927b2b Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/670 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26Changed SAM4S Erase for effective Sector eraseOlivier Schonken
In the previous iteration, the page counter for erases would not be updated with the erase size. This patch keeps the page counter synced with the sector counter. Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Change-Id: I95e56a3257b2ad8301c9f28167b842fa6466334f Reviewed-on: http://openocd.zylin.com/686 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26Fix idcode end of chain flag.Mathias K
For multi core cpus with cores without an idcode this doesn't work because the extra bit for every core and a n-bit shift in the data stream. Change-Id: Iba0ad9422ea55c01492b27b936d028719be31180 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/618 Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26kinetis: update support for all program flash granularitiesChristopher Kilgour
Updates the Kinetis NOR flash support to handle all known block and sector sizes. Previously only 2kiB sectors were hard-coded, now all four known combinations non-volatile sector sizes are supported. The premise of separating Kinetis Program Flash (PFLASH) from FlexNVM is also introduced. This means each "block" of flash (in Freescale terms) is treated as a bank in OpenOCD. Correspondingly, the existing board configuration for the TWR-K60M512 eval system is updated to recognize two banks instead of one. A board config for the TWR-K60F120M is also added. Bank and sector erase and programming has been checked with both of the mentioned eval boards. Change-Id: Iae2d10ebf8f548d0a3698df5430bbbe1ccadc58a Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://openocd.zylin.com/663 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Jan Dakinevich <jan.dakinevich@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26J-Link: Forcibly select JTAG transportAlexander Osipenko
Some versions of Segger's software do not select JTAG interface by default. Do it in the intial setup. Firmware version check code still present, with updated set of unsupported. Note from Segger: Alright, we were not aware of that OpenOCD does not select the interface before it starts communicating with the target. A debugger should always select the appropriate target interface before it starts communicating with the target, since otherwise it could also happen that a previous session with another debugger had selected SWD and the interface was not switched again by OpenOCD. Change-Id: I5b4eab7e0e3625ec32be75a36d89e16d17e899bf Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/667 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26JLink: added jlink_usb_io() functionAlexander Osipenko
jlink_usb_io() function added for basic communication, since jlink_usb_message() is more specific to JTAG transactions. To verify the patch issue "jlink config" command. Change-Id: Id7d10bd5e8985d4c77f2e0ca47fb6033db2877bf Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/679 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26J-Link Unsupported firmware version checkAlexander Osipenko
OpenOCD does not work with the latest firmware versions of Segger J-Link. Latest working version: V4.42c Unsupported versions: 4.44 to 4.46f, 4.20 to 4.30 Older versions of firmware can be found here: http://www.segger.com/j-link-older-versions.html The firmware versions does not correspond directly with "Software and documentation pack for Windows", it may be distinguished by the "compile" date in the information string. Print an warning message if unsupported firmware version detected. Change-Id: Id7d1f965b8ce2fdbcd0026a85ddd093e2fa48720 Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/666 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26docs: J-Link commands added to the manualLiviu Ionescu
The J-Link related commands and configuration commands were added to the "8.2 Interface Drivers" section of the manual. (previously they were enumerated as comments). The 'jlink pid' was marked as Config all other as Command. A draft of a compatibility note was added, but probably a table would be more appropriate. Change-Id: Ifbe230706815196aaad4e3729ed5089d5088b769 Signed-off-by: Liviu Ionescu <ilg@livius.net> Reviewed-on: http://openocd.zylin.com/680 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26lpc1768.cfg pulled out constants from flash init as variablesVandra Akos
Seems like an esthetic change, but it will allow easy support for other lpc17xx devices. Change-Id: I2cb953ce1afdd82f6ca65b38d5557a28416f895e Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/674 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26AT91SAM7 Flash: fixed redundant assignation warningMirela Tauciuc
Change-Id: Iffacdce9ce90c4ea7e0c8647860a0056b952f387 Signed-off-by: Mirela Tauciuc <mirela.tauciuc@gmail.com> Reviewed-on: http://openocd.zylin.com/691 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-05-29tools: initial.sh fixed to accept spaces in current pathLiviu Ionescu
When changing the path to the hooks folder, the path needs to be surrounded by quotation marks, to avoid failures when the current path contains spaces (not only legal, but a common case on Mac OS X). Change-Id: I8f180ab5f26fab00a7d78ebfe5713d4146c27452 Signed-off-by: Liviu Ionescu <ilg@livius.net> Reviewed-on: http://openocd.zylin.com/683 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-29docs: update interface support in READMESpencer Oliver
Change-Id: Id4b982ee426dedc85b643a71c1cdba67d0dd0ffd Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/682 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-28docs: include static members in doxygen outputSpencer Oliver
Change-Id: I1867e8d7a3bed1a399c0790f63fee68fb6b299c4 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/672 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-28build: remove src file execute permissionSpencer Oliver
Change-Id: I42a250cdfcd03424a63cd1a255f9cf4a3c6e3ccd Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/671 Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-25Jim_GetResult was called twiceVandra Akos
Removed the superflous call to Jim_GetResult, as we are reading in the result to a variable anyways in the next instruction. Change-Id: Idc96400737dc15e28304e97bcea79fa6c7a88ae1 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/661 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-25target: fix segfault in arm7_9 8/16bit readSpencer Oliver
Seems I5347352e7595686634bd0de13fcf6de6e55027b0 introduced an issue when reading 8/16 bit data - the in buffer was always set to 32bits. Change-Id: Ife2bb6a20fcb3ec0e486655512164f25ae9196b4 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/660 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-05-25jtag: fix incorrect LOG_DEBUG abs_chain_positionSpencer Oliver
Call jtag_tap_add before LOG_DEBUG otherwise abs_chain_position does not get correctly set. Change-Id: I47bd00cc83259c8bfd5551e08c3bb2ebeb5993f5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/658 Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-25board: Add Sony Ericsson J100I PhoneMathias K
This patch add the Sony Ericsson J100I Phone to the board configurations. Change-Id: I083ddf067c8ecdfdda0404fe9e9df980dbb86fe8 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/631 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-25config: Add TI Calypso CPU configurationMathias K
This patch add the TI Calypso CPU to the configuration files. Change-Id: Ieb462960391c4a2c630d7a83699c3b6e8162ace9 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/630 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-23jtag: fix osbdm.c typoBill Traynor
Fixing up tiny spelling error of "receive" vs. "recieve". Change-Id: Ib143d7fdb24ac1f2b7bd4ae90cadaf2e12760ff7 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/659 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-22jtag: fix opendous typoSpencer Oliver
Change-Id: Ia88c32f2394bde2048bdd73625e7664c93a9a87d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/656 Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-22jtag: remove opendous clang warningsSpencer Oliver
Change-Id: I0285c99507931e7d13aad36f4fc559c29a52faca Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/655 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-22stlink: check read_reg resultSpencer Oliver
Change-Id: I284824aa6f5eae8f6e910a482e9f7435e649fc0d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/657 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-05-21target: target.h typo and comment cleanupSpencer Oliver
Change-Id: Ib751803754672bf556f4f65bd3f5621f6bbb7f0c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/654 Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21target: enable TARGET_EVENT_EXAMINE_* eventsSpencer Oliver
Change-Id: I33efc0994b7bfe0faa2f4e8457fcc3c8e43d3571 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/635 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21target: enable TARGET_EVENT_RESUME_* eventsSpencer Oliver
Change-Id: I7d8378f9f34c6674db8c8b29d1a961389578e921 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/640 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21target: remove legacy target eventsSpencer Oliver
These events have been deprecated for a number of years, update any remaining scripts to the new events. Change-Id: Ic31ff388545ac8b3a500045699ca92c541b13f12 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/634 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21target: remove duplicate target eventsSpencer Oliver
Change-Id: Iba9ae441f3e6d48a7dfafe59ed093fef56a34723 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/633 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21target: disable armv6m unaligned memory accessSpencer Oliver
Change-Id: I42704cf80939ab9c9d4f402d2cd51c196e2fadb3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/645 Tested-by: jenkins
2012-05-21UserGuide: Updated list of supported interfaces, boards, and targets.Bill Traynor
User Guide: Chapter 6 'Config File Guidelines'. The directory listings of interfaces, boards, and targets has been brought up to date. Change-Id: I53f218a94cb81c5e90298b367259e833192af5f3 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/646 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-21build: add helper/types.h to config.hSpencer Oliver
this header is used in numerous files and adding to config.h simplifies its use globally. Change-Id: Id724a9950b90504721233022c7fb5768e9bc5548 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/649 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-21NEWS: add headline itemsSpencer Oliver
Change-Id: Ie78b0a171af76cf647deef501245caf54209d9f8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/639 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-21flash/nor/driver.h: typo fixChristopher Kilgour
Change-Id: Ie260f3c38b648e66958c014658bb6860171a7cc9 Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://openocd.zylin.com/653 Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-19stlink: add myself to copyright headerSpencer Oliver
Change-Id: I39e23b38ee630b80bccb5ff6b5819efa0fcb120a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/651 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-19stlink: remove superfluous stlink_usb.hSpencer Oliver
Change-Id: I34bc59b35fafd3fa659549e350b91310c5b33dd4 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/650 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-19contrib: enable cortex-m0 and cortex-m4 libdcc supportSpencer Oliver
Change-Id: Ib8ff645d1e5b8baca02de8ea95b629d88b203969 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/644 Tested-by: jenkins
2012-05-19remote_bitbang: fix native windows buildSpencer Oliver
Change-Id: Ied29ade0346c4595ffc1dafa788e2d5a595e0de3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/648 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-19remote_bitbang: missed closing brace in macro REMOTE_BITBANG_RAISE_ERRORAlexander Osipenko
Change-Id: I591308bd98810ef6361106c207c55b83c3a83890 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/647 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14docs: Fix incorrect -rtos option valuesPeter Stuge
Commit 9ca1592cb9fe4e61ee5bc327345fdfc254c9fe13 started on documentation for the -rtos option, but some of the documented values were incorrect so we'll clean up the mess here. Many thanks to Freddie Chopin for spotting this! Change-Id: Iaa633bd40ff5f75dd6a69e74e79dafc1643ee21a Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/642 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-05-14docs: add initial target rtos support infoSpencer Oliver
Change-Id: Idd39ce17922602aedd4626496ed8f5422bb76e07 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/641 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-14jtag: add opendous and estick supportSpencer Oliver
Change-Id: I49c25d226f05fdcaca6cbfc35c2ab47e8464abec Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/611 Tested-by: jenkins
2012-05-14stlink: add armv7m stlink handlingSpencer Oliver
This enables us to better handle some of the low level functions that the stlink does not support. It also enables us to share a few more of the standard cortex_m3 functions if necessary. Change-Id: I7a2c57450122012ec189245d8879d8967913e00e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/637 Tested-by: jenkins
2012-05-14flash: blank check use default_flash_blank_checkSpencer Oliver
Use default_flash_blank_check, this will use the much faster blank_check_memory handler if supported - 15x quicker on stm32f4. Otherwise it will fall back to using the slower default_flash_mem_blank_check. Change-Id: Ia231b3e95468c9e92594dbdbe1fa2d69e1506fc3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/632 Tested-by: jenkins
2012-05-14flash: fix protect check for pic32mx1x/2x familySpencer Oliver
Change-Id: Ib2692d8b79e52cd40f429008047494aa7f552984 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/612 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14jimtcl: update jim to fix make clean bugSpencer Oliver
jimtcl 0.73 has a issue when make clean is called. we have only included that fix as this is close to a release to update to jimtcl master. Change-Id: I5791ff32a98bd76e52feb9475605cbecf58420e5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/638 Tested-by: jenkins
2012-05-14stlink: fix stlink api2 single stepSpencer Oliver
This makes the newer v2 api behave as per the v1 api, eg. single stepping masks all interrupts. A better long term solution is to use same behaviour as a cortex-m3 target, see CORTEX_M3_ISRMASK_AUTO. Change-Id: Iaf9f9adf225cf274faaac938050bb996582aa98f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/621 Tested-by: jenkins
2012-05-14stlink: add stlink_api cmdSpencer Oliver
This enables the manual selection of the stlink api version. Change-Id: I0ec8c5b0a101b6456f426d2fec65971da56db4e7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/617 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14stlink: stlink/v1 use v2 api if supportedSpencer Oliver
The api v2 is supported on the stlink/v1 if it has a least v11 firmware. Change-Id: Idfdb5a7f5a5881326017451ae9b6004eeaa46a96 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/616 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14mips: support connecting under resetSpencer Oliver
Some targets support connecting while the target's srst is asserted. Tested on pic32 family. Change-Id: I0d20c40af6d031d1306043893e95e61f484c0a87 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/608 Tested-by: jenkins
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 12:21:04 +0000