aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 3 - files that are currently untested but verified with schematics Change-Id: Ia00c3b6437bffcfa0d178e779926ad9309e289fe Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/755 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 2 - files that are currently untested but assumed to work, as other configs using the same layout work fine Change-Id: Ifaa1904227ebdc394362ccaf3ad3c5384a716657 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/754 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 1 - files that were tested an verified as working fine Change-Id: If5986853a1cf118a9eb3b4c13b036d0f71c39624 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/534 Tested-by: jenkins
2012-07-30telnet: cleanup commentsSpencer Oliver
seems comments were mangled during the last cleanup. Change-Id: If759f62032705c7baffd3973e9717eb7e8a5d17c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/752 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30doc: add missing ulink v1 to supported interfacesSpencer Oliver
Change-Id: Ic497a3f9076ec1799ca715a99bc2e634bd1af40d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/761 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30Bugfixes in mips32_pracc.cSalvador Arroyo
When testing a pic32mx220f032b with different values for adapter_khz and cpu clocks i was getting a lot of corrupted data from the chip. From time to time openocd fails with segmentation faults or is aborted due to memory corruption. Change-Id: I134743f75c477b3d55dc74ae4474598e153b4a4a Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/690 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30Speed up mips_m4k_write_memory()Salvador
Do not call mips32_cp0_read() if not needed. This will speed up execution of mips_m4k_write_memory() by near 2x, with parameter count = 1. Change-Id: I7829a7802b6475bc6d4ac3f0632d8d239d1072da Signed-off-by: Salvador <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/624 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30flash: reduce code duplication in stm32 flash probeAndreas Fritiofson
Remove a lot of the repetitive code in stm32f1x flash probe by converting the large if-selector to a switch, moving the common checks outside it and concentrating the failure handling to a single point. Do the same with stm32f2x and stm32lx for consistency. Change-Id: Ic0ecfb1533c49f5d2108cda5fd20c8372d7c71ef Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/746 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30flash: fix stm32 flash driver typo'sSpencer Oliver
Change-Id: I37f3fee063d7f8729e057dcfe8904651790439e6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/745 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30flash: handle zero when reading stm32 flash size regSpencer Oliver
Some variants read 0 for the flash size register, rather than failing lets assume we have max flash fitted. Change-Id: Ie1fb4e73606f49268a6fd5921c3aef75bc4790d3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/744 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30flash: stm32l handle flash size read failureSpencer Oliver
Rather than failing if the flash size reg cannot be read lets assume we have the max flash size fitted. It is quite common on early ST silicon to not correct support this register. Change-Id: Ife058d60ae0027faad2c929ebd5b7fe2ef27234d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/743 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30flash: add stm32l Revision X supportSpencer Oliver
Revision X is not mentioned in the latest RM0038 rev5, however it has been confirmed correct by ST using ST-LINK Utilty. Change-Id: I65210e512ea25818a1d0d3b223502ebd7535b29d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/742 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30lpc1768.cfg abstracted and moved to lpc17xx.cfgVandra Akos
- Moved variant-independent code to lpc17xx.cfg, which will be included from lpc17??.cfg files automatically. - lpc1768.cfg filled with variant-dependent code. Change-Id: I7dabe6ed7da7be640ed38c13aaaa096b8796d9a0 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/675 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-30cfg: remove deprecated stm32 target configsAndreas Fritiofson
These were deprecated in commit 69ac20a. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Change-Id: I047872f8cd61b42aaca6588ab75566219e4a3f5d Reviewed-on: http://openocd.zylin.com/741 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-30Add support for FT232H chipsFreddie Chopin
FT232H chips are new highspeed devices from FTDI. Basically these are a half of FT2232H (or a quarter of FT4232H), so only one channel which can be used as OpenOCD interface. The chips are supported by libftdi 0.20 or later and by ftd2xx 2.08.12 or later. Change-Id: Ic9a2c279167c3419a24f0d6befacbb83c4ffeb25 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/736 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Salvador Arroyo <sarroyofdez@yahoo.es>
2012-07-30flash: don't write to FLASH_CR in stm32x_write_blockAndreas Fritiofson
It's unnecessary and prevents reusing this function to fix option byte writes. Also try to disable flash writing after an error. Change-Id: Ib5a7b768a1523e6b8da1555126fef4c1e60ab083 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/479 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-27Test the incoming debug_level, rather than the current.Alan Bowman
The existing code tests the current debug_level for validity, allowing the user to set it too high and never change it after that. The new behaviour is to test the debug_level that the user has requested. Change-Id: I85726a2e606c8d137e9b1cfe76fee865084844b1 Signed-off-by: Alan Bowman <alan.michael.bowman@gmail.com> Reviewed-on: http://openocd.zylin.com/764 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-07-22Revert "When calling openocd from a shell like this:"Alex Austin
This reverts commit e8641695c634109ebf5f1149923971770da1d28a Original premise was wrong. Proper command is "shutdown", not "exit". Change-Id: I07f5fe0dda9c24abe53628da986bfda0e406bb4a Signed-off-by: Alex Austin <alex.austin@spectrumdsi.com> Reviewed-on: http://openocd.zylin.com/757 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-19board: Add TI AM335x Evaluation ModuleTom Rini
This patch adds the TI AM335x Evaluation Module (ti_am335xevm) board configuration file. Change-Id: Id3529e54972f8acd8c790ad55c8d0f4058a1a1f6 Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/753 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-17Add config file for Lattice LC4032ZE CPLD (ispMACH 4000ZE family)Freddie Chopin
Change-Id: Iefec12b30ff737317c454b472200fd7e7edde619 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/748 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-17MPSSE: Add FT232H to supported chipsSalvador Arroyo
Change-Id: I1ce1db7eb87a7cdeafc1f8b8b34594f6fa3bf1f8 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/677 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-17Add FTDI JTAG driver using MPSSE layerAndreas Fritiofson
Based on ft2232.c but uses the MPSSE layer for low-level access, greatly simplifying the JTAG logic. Remove all libftdi/FTD2XX code and all layout specific code. Layout specifications are instead handled in Tcl. Use a signal abstraction to enable Tcl configuration files to define outputs for one or several FTDI GPIO. These outputs can then be controlled using the ftdi_set_signal command. Special signal names are reserved for nTRST, nSRST and LED (for blink) so that they, if defined, will be used for their customary purpose. Depending on the type of buffer attached to the FTDI GPIO, the outputs have to be controlled differently. In order to support tristateable signals such as nSRST, both a data GPIO and an output-enable GPIO can be specified for each signal. The following output buffer configurations are supported: * Push-pull with one FTDI output as (non-)inverted data line * Open drain with one FTDI output as (non-)inverted output-enable * Tristate with one FTDI output as (non-)inverted data line and another FTDI output as (non-)inverted output-enable * Unbuffered, using the FTDI GPIO as a tristate output directly by switching data and direction as necessary The data and output-enables are specified as 16-bit bitmasks, corresponding to the concatenation of the high and low FTDI GPIO registers. To specify an unbuffered output, use the same bitmask for both data and output-enable. The adapter configuration file must also specify default values for the FTDI data and direction GPIO registers, and the channel being used (if different from 0). Change-Id: I287a41d4c696cf5fc74eb10d5e63578b0dc7f826 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/452 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-17Add MPSSE communications layer for FTDI chipsAndreas Fritiofson
This is a higher-level libftdi replacement for use when implementing protocol drivers for FT2232, FT2232H or FT4232H. It takes care of device open/close and, unlike libftdi, also MPSSE command abstraction, command queueing, buffer handling and return data parsing. The FTDI device is accessed through libusb-1.0 in asynchronous mode. Change-Id: I051adb574dcc39f8ca9cd7f6dbe6ae4aeea5f4c8 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/451 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-11target: Cortex-M use consistent arm dap accessSpencer Oliver
Purely cosmetic but use the same style as Cortex-A target, this makes searching refs easier. Change-Id: I732ad9701f561e2312c5d191f5aaffd3a2f2393d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/731 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-07-11stlink: fix arm semihosting supportSpencer Oliver
Add missing arm cmd handlers that enable semi hosting support to work as expected. Change-Id: I063d82c48b82b4f6aed4efc4b08ea752d78e9047 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/734 Tested-by: jenkins Reviewed-by: Alan Bowman <alan.michael.bowman@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-07-11flash: add stm32f3x supportSpencer Oliver
add support for the new stm32f3x family from stmicro: http://www.st.com/stm32f3 Change-Id: Icd1db95bb2767d9c0ecef24deefa92b4fdaa4f14 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/735 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-07-11jtag: fix opendous reset commandStefan Mahr
This cast to uint16_t is not (host) endianess save. Depending on compiler usb_out_buffer[1] may be undefined. Change-Id: If686e5d5da39541329c340bbdef472ee7ab0281c Signed-off-by: Stefan Mahr <stefan.mahr@sphairon.com> Reviewed-on: http://openocd.zylin.com/732 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-11target: detect correct Cortex-M tar auto increment sizeSpencer Oliver
The ADIv5 spec guarentees that tar_autoincr_block will be 10bits. Make this the default for Cortex-M family until we detect a Cortex-M3/M4, we then change autoincrement to 12bits. Change-Id: Ie8c89134aa036879bdd8a3c312cee9715dbc6913 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/730 Tested-by: jenkins Reviewed-by: simon qian <simonqian.openocd@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-11jtag: remove redundant id checkSpencer Oliver
commit 5b0a1315948252ddde03fc74763ef8300c5f329c removed the need to check for 0xffffffff. Change-Id: Ib4d99bf1797ccd868ec15631dbc16079571a8dd6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/728 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-11When calling openocd from a shell like this:Stian Skjelsad
openocd -f board/sheevaplug.cfg -c init -c exit the calling shell will believe that openocd exited with an error due to exitval will be non-zero This is not tested against incomming telnet Change-Id: I63d15715a7b46f39a7de261a45039f8c3cad7a98 Signed-off-by: Stian Skjelstad <stian@nixia.no> Reviewed-on: http://openocd.zylin.com/470 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Bill Traynor <wmat@alphatroop.com> Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-11target.c, jim_target_md using command_print_samelineVandra Akos
jim_target_md is supposed to print out results with command_print in hexdump format. It was using command_print which appends a newline character aftre every invocation. Using command_print_sameline instead Change-Id: Iaff03021acc38d54b5a082cb58b82aa4449c0715 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/669 Tested-by: jenkins Reviewed-by: Alexander Osipenko <sipych@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-11target/target.c, jim_target_md refractoredVandra Akos
- Added a few lines of comment before the function explaining the usage and the output generated by the command - Added a few lines of comment in the body explaining what is happening to improve code readability - Renamed a few variables to improve readability: * a -> addr * b -> dwidth * c -> count - Added a new variable, named byte to contain the number of bytes to read, instead of overwriting the count parameter, to avoid confusion between the two values. Change-Id: I5828ec0f5aadaa39becec7b84f198756bb2c3d41 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/665 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-06Add a bit-level transfer queueAndreas Fritiofson
Interface drivers regularly need to keep track of where each part of a long read buffer should be copied, once that data arrives. Both source and destination are often at an arbitrary bit offset. This queued bit-level copy can help with that, by allowing the driver to perform postponed reads from the receive buffer already when building the transmit buffer, and have those reads executed at a later time when data is available. For simplicity, it uses the linked list implementation list.h imported from the Linux kernel. Change-Id: I06862a0a6f057cbbcacfb021f17a795195faded2 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/450 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-06-26topic: flash: description/id added for ATSAM3SD8CMike Crowe
New flash description for ATSAM3SD8C used on SAM3S-EK2 development boards. Name used is "at91sam3sd8c" and chipid is 0x29ab0a60. Mirrors description of other similar parts. Change-Id: I7fc4b82e7969451645ab067223663f08b76d866b Signed-off-by: Mike Crowe <mpcrowe@gmail.com> Reviewed-on: http://openocd.zylin.com/684 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26J-Link: Initialize .transports to suppress warning.Alexander Osipenko
jtag_interface.transports field was left uninitialized, which triggers warning message on program startup. Although hardware natively supports SWD interface, no software support currently present, so the value choosen to be <jtag_only>. Change-Id: I2da41790b1850950af416cec4362d5b7bf927b2b Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/670 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26Changed SAM4S Erase for effective Sector eraseOlivier Schonken
In the previous iteration, the page counter for erases would not be updated with the erase size. This patch keeps the page counter synced with the sector counter. Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Change-Id: I95e56a3257b2ad8301c9f28167b842fa6466334f Reviewed-on: http://openocd.zylin.com/686 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26Fix idcode end of chain flag.Mathias K
For multi core cpus with cores without an idcode this doesn't work because the extra bit for every core and a n-bit shift in the data stream. Change-Id: Iba0ad9422ea55c01492b27b936d028719be31180 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/618 Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26kinetis: update support for all program flash granularitiesChristopher Kilgour
Updates the Kinetis NOR flash support to handle all known block and sector sizes. Previously only 2kiB sectors were hard-coded, now all four known combinations non-volatile sector sizes are supported. The premise of separating Kinetis Program Flash (PFLASH) from FlexNVM is also introduced. This means each "block" of flash (in Freescale terms) is treated as a bank in OpenOCD. Correspondingly, the existing board configuration for the TWR-K60M512 eval system is updated to recognize two banks instead of one. A board config for the TWR-K60F120M is also added. Bank and sector erase and programming has been checked with both of the mentioned eval boards. Change-Id: Iae2d10ebf8f548d0a3698df5430bbbe1ccadc58a Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://openocd.zylin.com/663 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Jan Dakinevich <jan.dakinevich@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26J-Link: Forcibly select JTAG transportAlexander Osipenko
Some versions of Segger's software do not select JTAG interface by default. Do it in the intial setup. Firmware version check code still present, with updated set of unsupported. Note from Segger: Alright, we were not aware of that OpenOCD does not select the interface before it starts communicating with the target. A debugger should always select the appropriate target interface before it starts communicating with the target, since otherwise it could also happen that a previous session with another debugger had selected SWD and the interface was not switched again by OpenOCD. Change-Id: I5b4eab7e0e3625ec32be75a36d89e16d17e899bf Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/667 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26JLink: added jlink_usb_io() functionAlexander Osipenko
jlink_usb_io() function added for basic communication, since jlink_usb_message() is more specific to JTAG transactions. To verify the patch issue "jlink config" command. Change-Id: Id7d10bd5e8985d4c77f2e0ca47fb6033db2877bf Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/679 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26J-Link Unsupported firmware version checkAlexander Osipenko
OpenOCD does not work with the latest firmware versions of Segger J-Link. Latest working version: V4.42c Unsupported versions: 4.44 to 4.46f, 4.20 to 4.30 Older versions of firmware can be found here: http://www.segger.com/j-link-older-versions.html The firmware versions does not correspond directly with "Software and documentation pack for Windows", it may be distinguished by the "compile" date in the information string. Print an warning message if unsupported firmware version detected. Change-Id: Id7d1f965b8ce2fdbcd0026a85ddd093e2fa48720 Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/666 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26docs: J-Link commands added to the manualLiviu Ionescu
The J-Link related commands and configuration commands were added to the "8.2 Interface Drivers" section of the manual. (previously they were enumerated as comments). The 'jlink pid' was marked as Config all other as Command. A draft of a compatibility note was added, but probably a table would be more appropriate. Change-Id: Ifbe230706815196aaad4e3729ed5089d5088b769 Signed-off-by: Liviu Ionescu <ilg@livius.net> Reviewed-on: http://openocd.zylin.com/680 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26lpc1768.cfg pulled out constants from flash init as variablesVandra Akos
Seems like an esthetic change, but it will allow easy support for other lpc17xx devices. Change-Id: I2cb953ce1afdd82f6ca65b38d5557a28416f895e Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/674 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26AT91SAM7 Flash: fixed redundant assignation warningMirela Tauciuc
Change-Id: Iffacdce9ce90c4ea7e0c8647860a0056b952f387 Signed-off-by: Mirela Tauciuc <mirela.tauciuc@gmail.com> Reviewed-on: http://openocd.zylin.com/691 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-05-29tools: initial.sh fixed to accept spaces in current pathLiviu Ionescu
When changing the path to the hooks folder, the path needs to be surrounded by quotation marks, to avoid failures when the current path contains spaces (not only legal, but a common case on Mac OS X). Change-Id: I8f180ab5f26fab00a7d78ebfe5713d4146c27452 Signed-off-by: Liviu Ionescu <ilg@livius.net> Reviewed-on: http://openocd.zylin.com/683 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-29docs: update interface support in READMESpencer Oliver
Change-Id: Id4b982ee426dedc85b643a71c1cdba67d0dd0ffd Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/682 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-28docs: include static members in doxygen outputSpencer Oliver
Change-Id: I1867e8d7a3bed1a399c0790f63fee68fb6b299c4 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/672 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-28build: remove src file execute permissionSpencer Oliver
Change-Id: I42a250cdfcd03424a63cd1a255f9cf4a3c6e3ccd Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/671 Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-25Jim_GetResult was called twiceVandra Akos
Removed the superflous call to Jim_GetResult, as we are reading in the result to a variable anyways in the next instruction. Change-Id: Idc96400737dc15e28304e97bcea79fa6c7a88ae1 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/661 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-25target: fix segfault in arm7_9 8/16bit readSpencer Oliver
Seems I5347352e7595686634bd0de13fcf6de6e55027b0 introduced an issue when reading 8/16 bit data - the in buffer was always set to 32bits. Change-Id: Ife2bb6a20fcb3ec0e486655512164f25ae9196b4 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/660 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 01:56:46 +0000