aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-27cfg: beaglebone cleanupNeil Jensen
Simplified the configuration and removed things that were not necessary for debugging. Also added reset configuration. Signed-off-by: Neil Jensen <neil30al@gmail.com> Change-Id: I96f991c3051aa68278212cd6509484cbce40ccb7 Reviewed-on: http://openocd.zylin.com/488 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-26jtag: use correct tap -ignore-version maskSpencer Oliver
when -ignore-version is used we should mask of the upper 4bits not 8bits. Change-Id: I9ffe24c2aeeb414677357a647609fdf018890194 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/473 Tested-by: jenkins
2012-02-26jtag: fix cmd scan_chain expected_ids bugSpencer Oliver
This fixes scan_chain to correctly print all the expected_ids. Change-Id: I93738980d85e0fe369d40c58b19339424d37ec34 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/474 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-26flash: add stm32f2x async flash loaderSpencer Oliver
This enable the stm32f2x flash driver to use the asynchronous algorithm support. Speed increase is as follows: before - wrote 1048576 bytes from file stm32f4x.bin in 30.453804s (33.625 KiB/s) after - wrote 1048576 bytes from file stm32f4x.bin in 23.679497s (43.244 KiB/s) This also fixes a bug that was in the old flash loader. The old loader waited while bit16 of the status reg was 0, the new loader waits until this bit is 0 as stated in the flash spec. Bizarrely this bug did not effect programming on any tested parts. Change-Id: I3efc94d42cbe81283673a8f4203700638080af6e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/460 Tested-by: jenkins
2012-02-26flash: add stellaris async flash loaderSpencer Oliver
This enable the Stellaris flash driver to use the asynchronous algorithm support. Speed increase is as follows: before - wrote 65536 bytes from file test.bin in 5.486040s (11.666 KiB/s) after - wrote 65536 bytes from file test.bin in 2.274001s (28.144 KiB/s) Change-Id: I9004c9aadffa1ae3b0cbf908e6549b5b1f794508 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/403 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-26target: add target async algorithm supportSpencer Oliver
Currently the stm32f1x flash driver uses an asynchronous algorithm as part of the block flash programming. This greatly speeds up flash programming as the target is always running. Moving the async code to the target enable other targets to use this added functionality. Change-Id: I8e53f094c2ef7848a7f86ddb9a35b6edbfc8454a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/402 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-24cfg: beagleboneNeil Jensen
Moved ti_beaglebone.cfg to the board configuration directory. This was originally placed in the wrong location. Signed-off-by: Neil Jensen <neil30al@gmail.com> Change-Id: I05d10b62b1a21618635ee1773c30d77dc756ec82 Reviewed-on: http://openocd.zylin.com/481 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-23cfg: Beaglebone SupportNeil Jensen
Added support for the Beaglebone board based on the am335x processor family. After much trial and error, I was able to configure the Icepick-D and connect to the processor, halt execution, and run a sample program. This is a unified config file (it doesn't use any include statements) and further work needs to be done to split out the icepick-d configuration to be more generic. Change-Id: Ia1b8e9f01f56bd4f8c575ba3d0160c248583a15e Signed-off-by: Neil Jensen <neil30al@gmail.com> Reviewed-on: http://openocd.zylin.com/471 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-23target: add function to get number of bytes available in working areaAndreas Fritiofson
This is a much cleaner solution to the problem of allocating as much working area as possible than what is currently being done in most/all flash drivers (which is: try an arbitrary sized chunk, if it fails, pick a smaller number, rinse and repeat). Use this function to find out how much working area is available, limit or restrict that amount at will and then simply allocate it. Change-Id: Ib7d5d0b7485aed3e0a4fad60c1bedb7dfd16146f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/446 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-23target: rewrite working area allocatorAndreas Fritiofson
The existing allocator couldn't reuse a freed allocation if the sizes didn't match exactly. That led to problems when for example a flash write routine had allocated all of the working area to speed up operation. A subsequent verify pass couldn't allocate space for the checksum algorithm even though all previous allocations had been freed. This allocator is marginally more complex, but solves the above problem by splitting larger free areas to fulfill smaller requests and by merging released areas into adjacent free areas. An initial free area, covering the entire specified address range, is set up on first allocation, and all allocations are split off from (and ultimately merged into) that one. It can also easily be adapted to support several disjoint working areas for the same target, by setting up several initial free areas and slightly modifying the merge code. Change-Id: I6faaf9801312bb19a4fa4474694a0cd1c6e0ab54 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/445 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-22cfg: enable stm32f2x SYSRESETREQ supportSpencer Oliver
The stm32 family supports using SYSRESETREQ as a software reset, lets use it. Change-Id: I171ffa8d888a2d0c28b266051030311521e9bca9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/472 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-02-22stlink: support expected-id 0Spencer Oliver
This brings the stlink driver inline with the rest of OpenOCD. If the user configures the tap as -expected-id 0 then the IDCODE will be treated as a wildcard and ignored. Change-Id: I99160c69b2b40f5b1f608bb59ab6630894502fd8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/476 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-02-22docs: fix more texinfo warningsSpencer Oliver
A period or comma must follow the closing brace of an @xref. Change-Id: Ida5dc3600eca328d95b0a8f6b5c9fe0a0f3ba820 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/475 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-02-22Sometime in the past, nand_fileio_finish started to return ERROR_OK (with ↵Stian Skjelsad
the value of zero) on success. Change-Id: Ifb743c1617e2a6071a87c901fae8165969efcdbf Signed-off-by: Stian Skjelstad <stian@nixia.no> Reviewed-on: http://openocd.zylin.com/468 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-17stlink: add error status checkMathias K
This patch add the status check. Change-Id: I0fdb9bf66dad5ae416c7aa4c6e19116f846571f9 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/463 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-17Fix Typo in cfg fileJonathan Dumaresq
Change-Id: Id91ef70988212185f9ec653cbf5dc4e1defb1b9e Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-on: http://openocd.zylin.com/464 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-16Fix typo that result in recursion.Mathias K
Change-Id: Ie1102b4960bcb5acb254eae69b94fe87ab33dd0b Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/462 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-16stlink: add arm semi-hosting supportSpencer Oliver
Change-Id: Ib275d451a9201580f08ced090e50cf45eb3ab3e2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/459 Tested-by: jenkins
2012-02-16cfg: change default stellaris working areaSpencer Oliver
This sets the default stellaris working area to 2k rather than the current 8k. 2K is the smallest RAM size in the stellaris family. Change-Id: I1407f758eb0926cc094b824a6d25199b313c45de Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/458 Tested-by: jenkins
2012-02-16docs: fix texinfo warningsSpencer Oliver
A period or comma must follow the closing brace of an @xref. Change-Id: I272f1e7fac8f1fee4844f485b0b8e2e4e9cf352d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/456 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-02-16build: fix automake 1.11.2 issuesSpencer Oliver
automake 1.11.2 throws `pkglibdir' is not a legitimate directory for `DATA' if nobase_dist_pkglib_DATA is used. We work around this issue by defining our own location. Change-Id: I3c29e2df0b67e745283c50d358e31699bd60dc74 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/457 Tested-by: jenkins
2012-02-16Add stm32f0x targetJonathan Dumaresq
Change-Id: I4abfef4459b7e2780d17bdd7623fd1ef797cc8ea Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-on: http://openocd.zylin.com/437 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-16Add stm32f0x probe and info workingJonathan Dumaresq
I used the CPUID instead of adding a new argument to the flash bank command Fixed Type in comments Add the failsafe return value in device_id Change-Id: Ieb5a46fc002b5390a0c81bc8b49f6c687036ae1d Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-on: http://openocd.zylin.com/438 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-16Add bootloader mode.Mathias K
This patch add the bootloader define. Change-Id: I280a8a35c3514910dd381de3ab8ad59c9bd74ca1 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/455 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-13flash: fix incorrect stm32f2x/stm32f4x flash size registerSpencer Oliver
The ref manuals for the stm32f2x (RM0033 Rev4) and stm32f4x (RM0090 rev1) are unclear to the address of the flash size register (F_ID). According to contacts @ ST this is the correct address, the manuals will be updated in due coarse. Change-Id: If9fb83b3100458d17038cf27c2b23355e1dc5a9e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/448 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-02-13docs: correct small typoSpencer Oliver
Change-Id: I5e8bea591274b4032d3e04c4be7e9110138d5bc2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/447 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-13add icnova_sam9g45_sodimm supportLars Poeschel
This adds support for in-circuit icnova sam9g45 sodimm: http://www.ic-board.de/product_info.php?info=p214_ICnova-SAM9G45-SODIMM.html|ICnova The NAND flash is not yet working. Change-Id: I94ca5203f8d8a55dec1e4e87cd0631bd2b8393f9 Signed-off-by: lars@kiwigrid.com Reviewed-on: http://openocd.zylin.com/418 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-13topic: Add support for i.MX28EVKJames Robinson
Added the file imx28.cfg to the target directory Added the file imx28evk.cfg to the board directory Change-Id: I02a74a03f3773892f830d13660ffdded34f3261d Signed-off-by: James Robinson <jmr13031@gmail.com> Reviewed-on: http://openocd.zylin.com/428 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-13Add init_board documentationFreddie Chopin
This patch adds init_board concept information to OpenOCD manual. Additionally a link from init_targets chapter to new chapter about init_board is added. Change-Id: I09b9aaa1cf68b94f35701224f641cae9811a5bcf Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/440 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-10cfg: add revb ek-lm3s811 board configSpencer Oliver
Add board config for older (revb) ek-lm3s811 Change-Id: I75aca1714de3e88b60d00fa0f99f2c4b076b569c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/444 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10cfg: fix incorrect STM32L SW-DP idSpencer Oliver
STM32L ref manual (RM00038 Rev5) states the SW-DP id should be 0x4ba00477. The correct value from silicon is 0x2ba01477 - the typo has been confirmed by ST. Change-Id: Ie35a1f13dc5dedc1b148fb219c6974bfa48b537c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/441 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10cfg: add stm32ldiscovery board configSpencer Oliver
Change-Id: I392fdc4c588783fda1c7d4d6413b86ae9aa3f6b9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/442 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10cfg: add ST-LINK TRANSPORT config overrideSpencer Oliver
This enables the user to override the transport used for st-link. If JTAG is selected it will also change the default id used to the JTAG id rather than the SW-DP id. Change-Id: I4fe352e4932e2f4ec278168e99ba2d2d50fd850a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/443 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-09Add init_board procedure executed after init_targetsFreddie Chopin
This adds init_board procedure that behaves exactly the same as init_targets - it can be overriden by "next level" scripts. This procedure is executed after init_targets, allowing common stuff (jtag chain, memory, flash, ...) to be configured in target script (via init_target) and leaving rest (like additional memory, reset configuration, reset-init handlers, ...) to be done in init_board. This makes init_targets scheme more complete and easier to use - current board scripts will not need new init_targets, because everything can be "packed" in init_boards. Moreover it solves the problem of variables being set in init_targets (executed after init), which were not accessible by "linear" scripts (parsed before init). All that has to be done is to enclose all code in board config file in init_board procedure. Change-Id: I0736b1ff9873a687966407d62b58ccf29a8e597b Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/427 Reviewed-by: Chris Morgan <chmorgan@gmail.com> Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-09Add missing init_targets documentationFreddie Chopin
Add init_targets procedure documentation to OpenOCD manual explaining the concept. Change-Id: I82933ed90397cbcdc5c72801182573ca69b1d265 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/439 Reviewed-by: Chris Morgan <chmorgan@gmail.com> Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-07cfg: add stm32vldiscovery board configSpencer Oliver
Change-Id: I6343d1e61153ba71c71f8a473171972abb8e400d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/432 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-07docs: add original stlink (STLINK-V1) usage noteSpencer Oliver
Add a note to the docs about the original stlink being broken under linux. Change-Id: Ib440d78e5c7d31eeace99f611a76fcf701bfb8bc Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/433 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-07Export _TARGETNAME from generic LPC2xxx scriptFreddie Chopin
Make _TARGETNAME variable global so it could be used by scripts sourcing it. Change-Id: Iaf1c3b53875734658b1b8f136c9bb958988b56bf Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/421 Tested-by: jenkins Reviewed-by: Chris Morgan <chmorgan@gmail.com> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-02-06doxygen: use correct comment syntaxSpencer Oliver
This issue was caused by uncrustify not correctly converting the doxygen comments. Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Change-Id: Ie6dc3b057a08603b670cb27312e5f0d989426e6c Reviewed-on: http://openocd.zylin.com/431 Tested-by: jenkins
2012-02-06build: cleanup src/target directorySpencer Oliver
Change-Id: Ia055b6d2b5f6449a38afd0539a8c66e7d7e0c059 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/430 Tested-by: jenkins
2012-02-06build: cleanup src/jtag/drivers directorySpencer Oliver
Change-Id: I99c08ec0132d5a15250050e718310f1ddd9fe546 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/425 Tested-by: jenkins
2012-02-06checkpatch: remove __packed and __aligned checksSpencer Oliver
These checks are specific to linux kernel. Change-Id: Ia9b837b5609922a897822f1d55f96f04c0f1f838 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/424 Tested-by: jenkins
2012-02-06build: cleanup src/jtag directorySpencer Oliver
Change-Id: I7caf57ca3d9dfbe152504472a6bb26c2a28b92e8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/423 Tested-by: jenkins
2012-02-06checkpatch: increase line length to 120Spencer Oliver
Change-Id: I963385d0a4880f2b1e55208c8dfe65c1870ac6e1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/422 Tested-by: jenkins
2012-02-06build: cleanup src/flash/nor directorySpencer Oliver
Change-Id: Ic299de969ce566282c055ba4dd8b94892c4c4311 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/420 Tested-by: jenkins
2012-02-06build: cleanup src/flash/nand directorySpencer Oliver
Change-Id: I21bb466a35168cf04743f5baafac9fef50d01707 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/419 Tested-by: jenkins
2012-02-06build: cleanup src/flash directorySpencer Oliver
Change-Id: I33c32a884095cff139546f760bc8fa6586e8c5b0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/417 Tested-by: jenkins
2012-02-06build: cleanup src/rtos directorySpencer Oliver
Change-Id: I24bc62d12409dbfc20a0a986acf6b3f2c913e36d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/416 Tested-by: jenkins
2012-02-06build: cleanup src/helper directorySpencer Oliver
Change-Id: I71a312df783995e9083c345c25e73902d5aef59e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/415 Tested-by: jenkins
2012-02-06checkpatch: remove volatile checkSpencer Oliver
We may enable this again - but at the moment is causing extra issues with reformatting the codebase. Change-Id: I5a2aaaa32ad784e011dff3079ff45501452c1819 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/414
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-20 12:41:35 +0000