aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-29Add another scripts search path for Windows buildsFreddie Chopin
Add single "scripts" folder to search path for Windows OpenOCD builds that don't use cygwin bin/openocd.exe scripts/interface/dummy.cfg scripts/target/at91eb40a.cfg Do some refactoring of current code (thx to Andreas). Change-Id: Idbb08d1368b06f25da44f4f9ab1511db992b1724 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/785 Tested-by: jenkins
2012-08-29kinetis: bugfix in kinetis_write() fallback pathAndreas Fritiofson
Offset calculation into buffer was wrong and code would read outside buffer if count was not a multiple of four. Change-Id: Ied625b10221423d5a5f25d27ce1edd8c2c3eca8a Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/749 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29kinetis: ensure flash writes are not truncatedChristopher Kilgour
The number if longwords or "sections" (Freescale term) written for a Kinetis flash write (4, 8, or 16 bytes depending on the part density/granularity) are now rounded up to ensure there are no truncations when the desired write is not a multiple of the minimum write size. Change-Id: I8db40a8769d8ac5393a46cbf4e5ff0df82faf916 Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://openocd.zylin.com/738 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29jtag: fix clang ulink memory leaksSpencer Oliver
Memory leaks discovered by clang 3.1 Change-Id: I8a784ba9726deac508424eddb27e9c8409e2773f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/795 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29Patch: Make pic32mx unlock work at higher scan frequenciesSalvador Arroyo
For example in a pic32mx220, pic32mx unlock don't work if adapter_khz is set to 5000 or more. A short delay after asserting reset fix the problem. Change-Id: I62e493edfcea585c36c8de77a969cebac7227b96 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/790 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29cfg: update for target's that support cortex_m AIRCR SYSRESETREQSpencer Oliver
If the target supports SYSRESETREQ make sure we use that as the default if srst is not fitted/configured. Change-Id: I24c907493134506320e69c1218702930629c1cdc Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/792 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29stlink: stlink_interface_init_target use hex prefixSpencer Oliver
Change-Id: I782da74687bcf111c1f04c53b2c1120d6a034441 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/791 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29arm7_9: Fix broken halfword/byte memory readsAndreas Fritiofson
Always scan out all bits, but make sure only the allowed number of bytes end up in the caller-provided buffer. Discard the rest by adding another scan field when size < 4. Rewrite the endianness callback to avoid reading outside allocated memory. Make it directly usable as a callback without the need for a wrapper. Move the shared callback to a more suitable home in arm7_9_common. This fixes the regressions introduced in commits 991ed5a2b657e660f744eefddb084724e52938ea cb90d32e386a7489d31136997209c61e9559ff5e and c3074f377c1da33ca8ba8493826e1b52351eebc6 Change-Id: Ia8bde8c5a9844e89a1d6c0bc8534cd26f02f8d11 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/789 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24Severe bug in Pracc codeSalvador Arroyo
The function wait_for_pracc_rw() fails if Pracc bit is 0. The variable ejtag_ctrl is loaded with the content of the control register in the first scan. In the second scan Pracc bit is scanned out as 0, letting the proccesor go. The result is unpredictable. All the strange data corruption when scanning at certain frequencies, or the strange delays needed when entering or leaving fasdata area are retated to this bug. Now the code works at any scan frequency, tested up to 15000Khz and indepently of processor speed, tested at 31.25Khz and 4/8Mhz. Change-Id: Iedfd81d06d6af4bc738a521f720e42323025b268 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/769 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24target: remove unused working area 'user' fieldSpencer Oliver
working_area::user has never been used so lets remove it. Change-Id: I1200311b34248549c1fe30c9f675e6129b7bebee Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/781 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24cfi: fix type-punning warnings in cfi_spansion_write_blockAndreas Fritiofson
Retest the condition when needed, instead of abusing the common_magic field as a flag. There are only two options here. Either it's an armv7m or it's another arm. is_arm(...) will return true even for armv7m, so it's imperative to check in the right order. Change-Id: Ic227f19f7babf1b0b0fe075f9a3abc4eabc7d5f1 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/779 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24build: fix clang warningsMartin Nowak
Change-Id: I3c6a63a18034535f0a8c2c62ba8a708f09d7839b Signed-off-by: Martin Nowak <dawg@dawgfoto.de> Reviewed-on: http://openocd.zylin.com/765 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24target: catch dap_lookup read errorSpencer Oliver
Issue found by clang-3.1 Change-Id: I2e922ec83117e75db5bec1e82edaa75a9e6e7464 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/778 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24flash: remove lpc2000 clang warningsSpencer Oliver
By Initialising the param_table we remove the clang warning's. We are also make sure we are not passing any rogue values to lpc2000_iap_call. Change-Id: Idb3b0077d1dae5f03dedab1d46d01140fe9ffb10 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/777 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24tcl: fix potential memory leaksSpencer Oliver
Reorder to allocate all memory after COMMAND_PARSE_NUMBER call. This removes a clang warning about un-released memory Change-Id: I8dbeb664a6467077157015bd879bc0aefc5e8614 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/776 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24build: fix memory leaksSpencer Oliver
Fix the memory leaks found by clang-3.1 Change-Id: Iaae68627ef599c324c9c9ee5737c22e92512862d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/775 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24flash: fix FC_FLEX_RAM class code pathSpencer Oliver
If the flash class was defined as FC_FLEX_RAM then this would always drop through to the default handler. This bug was found by clang, so untested. Change-Id: I2d9fe6415dd216728a145519400f7b9ef1bd3c3a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/773 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-08-24helper: command.c cleanupSpencer Oliver
Change-Id: I66643960e38625e843b5f54d1c072e4eee78284d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/772 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24ftdi: Olimex ARM-USB-TINY validatedAurelien Jacobs
Flashing a CFI flash and debugging with gdb work fine. Change-Id: Ib2578ee6f41c1003968198439033d00d805122f7 Signed-off-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-on: http://openocd.zylin.com/770 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24configure.ac: Fix misspelled variableAndreas Fritiofson
Nothing checks it against 0, so it hasn't caused any problems. Change-Id: I5e349299c37fb72bab811d78992f6de3731a986a Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/774 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-14cfg: remove duplicate Olimex ARM-USB-OCD configSpencer Oliver
This file is already included as olimex-arm-usb-ocd.cfg. Change-Id: I0e66977c58e74ac93a0dc3a0c88a5e5af4992f8b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/780 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-09cfg: added new openocd-usb highspeed adapterAndrew Karpow
The embedded projects shop released a new highspeed version of the openocd-usb adapter. These configuration files adds support for it. Change-Id: I9b23d7889f998712b9041af101e3f0b9aba85b28 Signed-off-by: Andrew Karpow <notandyk@gmail.com> Reviewed-on: http://openocd.zylin.com/771 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-02Restore "-dev" tag.Freddie Chopin
Change-Id: Ibb7669ea73872d75a5c2f32f2264e57b1d0f20c7 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-02The openocd-0.6.0-rc1 release candidate.v0.6.0-rc1Freddie Chopin
Change-Id: Idd85159050a39c2136ee8a31f939a2b3e35cff1b Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-02target: add valid smp target checkSpencer Oliver
Check that the target is valid before calling any target functions. Change-Id: I538fccc79d5ec89976e14beab02cb20490b299bb Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/766 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-02Update link and instructions about ssh keys in HACKINGFreddie Chopin
Gitweb changed their instructions, info about ssh keys is now on separate page for all platforms (selector at top of the page). Change-Id: I3eab5dfae06cfb73f4a76718f92518454021e557 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/768 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-08-02Add missing files (header and .txt) for release.Freddie Chopin
make distcheck is used to make packages with OpenOCD release, this command uses information from Makefile.am files to know which files should be included in the package and which can be left only in repository. This patch makes a few headers from recent JTAG drivers and one txt file with info about target tcl config files included in released packages. Change-Id: I91202290633a30f53624a8c7d9a0ebf72c40772b Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/767 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-08-01arm946e: add icache/dcache manipulation commands.Alexander Osipenko
Provide cache operations coherent with internal target state. Functions similar to xscale target. Change-Id: Ic6b9a894154f6e4f5672b5d7f5035c9774ee9499 Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/695 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01arm946e: cp15 command returns value to the scriptAlexander Osipenko
Not just print it. This enables scripts to analyze valuable config options of arm946e-s cores, do internal BIST memory tests and more. Be careful to flush caches before disabling it. Do not forget that BIST test overwrites memory. - cp15 rewritten from COMMAND_HANDLER to jim_handler. Change-Id: I734da0be6db0a3127c2daa94ed75efef94da8ceb Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/694 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01arm946e: cleanup C0.C cache type reg accessAlexander Osipenko
Cache type register C0.C is read-only, and display hard core configuration information. This information is unlikely be changed in runtime. - removed C0.C access when result is not used in arm946e_invalidate_dcache() - access C0.C only once per target, store result in cp15_cache_info field of target structure - fix cache index count calculation Change-Id: I12bc4c967fdf07f54d755f2f2f42406c0ababc1a Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/693 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01arm946e: don't use global variables for contextAlexander Osipenko
Global variables 'dc' 'ic' had been used in the code to keep target's state of D-cache and I-cache on debug entry. This may lead to incorrect operation in configurations with multiple cores and unequal cache states. Fix: move cache state to the appropriate bits of the 'cp15_control_reg' field (already present but unused). Vaule of cp15 control register stored here on arm946e_post_debug_entry(), and analyzed later in arm946e_write_memory(). Change-Id: I71ef82be00c21d6fffb3726cec4974d1ece70dfe Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/692 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01added target configs for the lpc17xx devicesVandra Akos
lpc1751, lpc1752, lpc1754, lpc1756, lpc1758, lpc1759 lpc1763, lpc1764, lpc1765, lpc1766, lpc1767, lpc1768, lpc1769 Change-Id: I740b66930cd379c9390f3c1031cdbada747a6ce4 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/676 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-08-01cfg: Add Hitex LPC1768-Stick using ftdi driverJoerg Fischer
Add cfg files for Hitex LPC1768 Stick Website: http://www.hitex.com/?id=1602 This board has a FTDI2232D as JTAG interface, using the same layout as the Hitex STM32-PerformanceStick but with different USB PID. Main MCU is a LPC1768 from NXP. The interface config uses the ftdi driver instead of ft2232. The corresponding ft2232 layout would be "stm32stick". Change-Id: I1fd15588c5af35f7d51777d1ad958cc1dc72c6f7 Signed-off-by: Joerg Fischer <turboj@gmx.de> Reviewed-on: http://openocd.zylin.com/763 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01flash: stm32f1x: Pad odd byte writes early to avoid 16-bit writesAndreas Fritiofson
For odd byte counts, stm32x_write() pads the last byte and writes it using a discrete 16-bit access. The stlink debugger can't issue 16-bit writes so it fails for odd byte writes. This patch changes stm32x_write() to pad odd byte writes into a new buffer and use the normal code path with a single block write. The fallback path, when working area cannot be allocated, has to use 16-bit writes though which means that sufficient working area is required for stlink and odd byte writes. Change-Id: I4c5dc456300b6e1056f76b0095be8aceee3e954f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/756 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 4 - files that are currently untested Change-Id: Ic4a08fdefc99e7a9d50885c888c3fca60ffa39bd Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/750 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 3 - files that are currently untested but verified with schematics Change-Id: Ia00c3b6437bffcfa0d178e779926ad9309e289fe Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/755 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 2 - files that are currently untested but assumed to work, as other configs using the same layout work fine Change-Id: Ifaa1904227ebdc394362ccaf3ad3c5384a716657 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/754 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 1 - files that were tested an verified as working fine Change-Id: If5986853a1cf118a9eb3b4c13b036d0f71c39624 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/534 Tested-by: jenkins
2012-07-30telnet: cleanup commentsSpencer Oliver
seems comments were mangled during the last cleanup. Change-Id: If759f62032705c7baffd3973e9717eb7e8a5d17c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/752 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30doc: add missing ulink v1 to supported interfacesSpencer Oliver
Change-Id: Ic497a3f9076ec1799ca715a99bc2e634bd1af40d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/761 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30Bugfixes in mips32_pracc.cSalvador Arroyo
When testing a pic32mx220f032b with different values for adapter_khz and cpu clocks i was getting a lot of corrupted data from the chip. From time to time openocd fails with segmentation faults or is aborted due to memory corruption. Change-Id: I134743f75c477b3d55dc74ae4474598e153b4a4a Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/690 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30Speed up mips_m4k_write_memory()Salvador
Do not call mips32_cp0_read() if not needed. This will speed up execution of mips_m4k_write_memory() by near 2x, with parameter count = 1. Change-Id: I7829a7802b6475bc6d4ac3f0632d8d239d1072da Signed-off-by: Salvador <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/624 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30flash: reduce code duplication in stm32 flash probeAndreas Fritiofson
Remove a lot of the repetitive code in stm32f1x flash probe by converting the large if-selector to a switch, moving the common checks outside it and concentrating the failure handling to a single point. Do the same with stm32f2x and stm32lx for consistency. Change-Id: Ic0ecfb1533c49f5d2108cda5fd20c8372d7c71ef Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/746 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30flash: fix stm32 flash driver typo'sSpencer Oliver
Change-Id: I37f3fee063d7f8729e057dcfe8904651790439e6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/745 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30flash: handle zero when reading stm32 flash size regSpencer Oliver
Some variants read 0 for the flash size register, rather than failing lets assume we have max flash fitted. Change-Id: Ie1fb4e73606f49268a6fd5921c3aef75bc4790d3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/744 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30flash: stm32l handle flash size read failureSpencer Oliver
Rather than failing if the flash size reg cannot be read lets assume we have the max flash size fitted. It is quite common on early ST silicon to not correct support this register. Change-Id: Ife058d60ae0027faad2c929ebd5b7fe2ef27234d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/743 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30flash: add stm32l Revision X supportSpencer Oliver
Revision X is not mentioned in the latest RM0038 rev5, however it has been confirmed correct by ST using ST-LINK Utilty. Change-Id: I65210e512ea25818a1d0d3b223502ebd7535b29d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/742 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-30lpc1768.cfg abstracted and moved to lpc17xx.cfgVandra Akos
- Moved variant-independent code to lpc17xx.cfg, which will be included from lpc17??.cfg files automatically. - lpc1768.cfg filled with variant-dependent code. Change-Id: I7dabe6ed7da7be640ed38c13aaaa096b8796d9a0 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/675 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-30cfg: remove deprecated stm32 target configsAndreas Fritiofson
These were deprecated in commit 69ac20a. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Change-Id: I047872f8cd61b42aaca6588ab75566219e4a3f5d Reviewed-on: http://openocd.zylin.com/741 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-30Add support for FT232H chipsFreddie Chopin
FT232H chips are new highspeed devices from FTDI. Basically these are a half of FT2232H (or a quarter of FT4232H), so only one channel which can be used as OpenOCD interface. The chips are supported by libftdi 0.20 or later and by ftd2xx 2.08.12 or later. Change-Id: Ic9a2c279167c3419a24f0d6befacbb83c4ffeb25 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/736 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Salvador Arroyo <sarroyofdez@yahoo.es>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 19:37:43 +0000