aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-06-28cortex_m3: add auto maskisrv0.5.0-rc1Spencer Oliver
This patch extends the cortex_m3 maskisr command by a new option 'auto'. The 'auto' option handles interrupts during stepping in a way they are processed but don't disturb the program flow during debugging. Before one had to choose to either enable or disable interrupts. The former steps into interrupt handlers when they trigger. This disturbs the flow during debugging, making it hard to follow some piece of code when interrupts occur often. When interrupts are disabled, the flow isn't disturbed but code relying on interrupt handlers to be processed will stop working. For example a delay function counting the number of timer interrupts will never complete, RTOS task switching will not occur and output I/O queues of interrupt driven I/O will stall or overflow. Using the 'maskisr' command also typically requires gdb hooks to be supplied by the user to switch interrupts off during the step and to enable them again afterward. The new 'auto' option of the 'maskisr' command solves the above problems. When set, the step command allows pending interrupt handlers to be executed before the step, then the step is taken with interrupts disabled and finally interrupts are enabled again. This way interrupt processing stays in the background without disturbing the flow of debugging. No gdb hooks are required. The 'auto' option is the default, since it's believed that handling interrupts in this way is suitable for most users. The principle used for interrupt handling could probably be used for other targets too. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-28cortex_m3: add BKPT_TYPE_BY_ADDR definePeter Horn
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-27build: cleanup jimtcl generated configure.gnuSpencer Oliver
We use configure.gnu to pass options to the jimtcl submodule. Make sure a distclean removes any generated files Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-26Add description for configure argument "--enable-ulink" to README fileMartin Schmölzer
2011-06-26Add OpenULINK driver files generated by SDCC to .gitignoreMartin Schmölzer
2011-06-26Add -DPKGLIBDIR to AM_CPPFLAGS.Martin Schmölzer
This is required so the OpenULINK driver knows the install location of the OpenULINK firmware image.
2011-06-26Include ULINK driver in src/jtag/drivers/Makefile.amMartin Schmölzer
A new variable "nobase_dist_pkglib_DATA" is introduced to install the OpenULINK firmware image to $PREFIX/lib/openocd/OpenULINK/ulink_firmware.hex Also, the variable "EXTRA_DIST" is used to include the OpenULINK firmware source in the OpenOCD source distribution.
2011-06-26Include ULINK driver in src/Makefile.amMartin Schmölzer
2011-06-26Include ULINK driver in configure.inMartin Schmölzer
2011-06-26Add ULINK interface scriptMartin Schmölzer
2011-06-26Include ULINK driver in src/jtag/interfaces.cMartin Schmölzer
2011-06-26Add OpenULINK firmwareMartin Schmölzer
Build requires SDCC, the Small Device C Compiler.
2011-06-26Add source code for new ULINK driverMartin Schmölzer
2011-06-24Fix load_image for ELF with all p_paddr set to zeroDrasko DRASKOVIC
So far image_load command tries to load ELF binaries to address discovered by reading p_paddr member of a Program header of an ELF segment. However, ELF specifications says for p_paddr : ...Because System V ignores physical addressing for application programs, this member has unspecified contents for executable files and shared objects. ARM ELF specifiaction goes even further, demanding that this member be set to zero, using the p_vaddr as a segment load address. To avoid the cases to wrong addr where p_paddr is zero, we are now using p_vaddr to as a load destination in case that *all* p_paddr == 0. Basically, this patch re-implements the approach present in BDF's elf.c, which is used by GDB also (so that we can be consistent).
2011-06-17build: do not included generated files in distributionSpencer Oliver
We have to use this method as automake seems to ignore nodist_ on libs. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-17build: add missing files to make distSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-17build: pass correct flags to jimtcl during make distcheckSpencer Oliver
This is only for the case of a make distcheck. During a normal release build these flags will be created by configure.gnu Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-17build: add missing files from dist releaseSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-16ADAPTER: Fixed transport selection mechanism to support transports other ↵Tomek CEDRO
than jtag (if defined).
2011-06-16OPENOCD: Renamed ambiguous main2() into openocd_thread() to show possible ↵Tomek CEDRO
solution for thread support in future.
2011-06-16Added Olimex STM32 {H,P}107.cfg boardDale Lukas Peterson
2011-06-13transport: move files over to transport folderØyvind Harboe
as we introduce swd and jtag as two transports, we want to start up with a new transport folder to organize the code a bit.
2011-06-12HACKING: add tip on how to write commentsØyvind Harboe
2011-06-12added minimodule interfacerlrosa
2011-06-12doxy moreRodrigo L. Rosa
2011-06-12doxy & cleanupRodrigo L. Rosa
2011-06-12fix protection behaviorRodrigo L. Rosa
2011-06-12cleanup trailing whitespacesRodrigo L. Rosa
2011-06-12flash speed improvedRodrigo L. Rosa
2011-06-12removed unnecessary actions/controlsRodrigo L. Rosa
2011-06-12cleanup flash module commandRodrigo L. Rosa
2011-06-12fix read for verify_imageRodrigo L. Rosa
2011-06-12fix read speed improved by queueing commandsRodrigo L. Rosa
2011-06-12fix flash driver size, sector eraseRodrigo L. Rosa
2011-06-12Added minimodule (ftdi) interfaceRodrigo L. Rosa
2011-06-08Added configuration file for STM3220G-EVAL board.Laurent Charpentier
2011-06-08Added configuration file for stm32f2xxx.Laurent Charpentier
2011-06-07Silence -O3 warningØyvind Harboe
2011-06-07Fix "unused variable" warnings (errors) detected with GCC 4.7.0 - leftover ↵Freddie Chopin
changes
2011-06-05mips: add nor flash write from memory blockStefan Mahr
2011-06-04crc check on flashed dataRodrigo L. Rosa
2011-06-04code cleanupRodrigo L. Rosa
2011-06-04Fix "unused variable" warnings (errors) detected with GCC 4.7.0 - dubious fixesFreddie Chopin
2011-06-04Fix "unused variable" warnings (errors) detected with GCC 4.7.0 - trivial fixesFreddie Chopin
2011-06-02uptech2410Bear
2011-06-01bootstrap: Various code improvementsTormod Volden
- Do not specify -e twice. - Use "which" instead of calling commands that might not exist. - Fix bashism ("==" is C not sh) - Carefully quote potentially empty variables - Check command arguments before doing anything - Rewrite argument checking to be more easily extensible - Consistent indentation - UNIX style error messages
2011-06-01mips: fixup fastdataStefan Mahr
fixup fastdata
2011-06-01mips: fix some more endian madnessStefan Mahr
2011-06-01bootstrap: fix argument handlingLaurent Charpentier
- no argument => run submodule init - "nosubmoudle" => do not run submodule - other values => error message
2011-05-29Board definition for mini6410/tiny6410 (ARM1176)Damjan Marion
The following mini6410/tiny6410 functions are available: init_6410 - initialize clock, timer, DRAM init_6410_flash - initializes NAND flash support install_6410_uboot - copies u-boot image into RAM and runs it
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-04-05 01:54:54 +0000