aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-08Stop ignoring most scan chain validation errorsDavid Brownell
Among other things this causes startup errors to kick in the fallback "reset harder" logic during server startup. Comments are also updated a bit, explaining what the various error paths signify (in at least my observation). There's one class of validation error that we can still plausibly ignore: when wrong IDCODE values are observed. This change seems to have helped make an OMAP5912 behave much more reliably. There's still some post-reset flakiness, but it's unrelated to scan verification. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-08Merge branch 'master' of ↵David Brownell
ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
2009-10-08Testing committing changes to .gitignore to ignore more build outputØyvind Harboe
2009-10-08Add .project to .gitignoreØyvind Harboe
2009-10-08Stop GDB when polling fails, srst assert or powerdropout is detectedØyvind Harboe
2009-10-08Update copyright statements. Make it easier to sync with Jim TclØyvind Harboe
2009-10-07make OMAP5912 resets more reliableDavid Brownell
Without some extra delay after releasing SRST, we seemed to be trying to talk to the TAP before it was ready to respond. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-07iMX25 target supportJohn Rigby
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-07Houston, we have Mirror!David Brownell
2009-10-07Merge branch 'master' of ↵David Brownell
ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
2009-10-08Change most in-tree references from SVN to GIT.dbrownell
Also, talk about "mainline" not "trunk". The release.txt and release.sh files need more updates. git-svn-id: svn://svn.berlios.de/openocd/trunk@2825 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07Force sane SRST and TRST initializationdbrownell
At least some FT2232 based adapters don't necessarily come up in the expected state, with SRST and TRST disabled. Since other adapters could suffer the same problem, let's avoid needing to patch every driver and just force *all* adapters to initialize those values properly at server startup. git-svn-id: svn://svn.berlios.de/openocd/trunk@2824 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07Better fix for TAPs violating the JTAG spec for IR-Capture.dbrownell
Instead of just assuming all IDCODE-deprived TAPs violate the JTAG spec (they don't!), just require TAPs with such problems to be declared with proper ircapture/irmask values. Example, with mask and value of zero. git-svn-id: svn://svn.berlios.de/openocd/trunk@2823 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07Remove much #ifdeffery around _DEBUG_JTAG_IO_ usage.dbrownell
Have DEBUG_JTAG_IO() always trigger necessary warnings. git-svn-id: svn://svn.berlios.de/openocd/trunk@2822 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07buildfixdbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2821 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07Merge branch 'master' of ↵David Brownell
ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
2009-10-07Remove pointless "target library" chapter.dbrownell
It had a very little bit of content; move that to the more extensive chapter on config file guidelines, and give more current "ls" output to show the available library code. git-svn-id: svn://svn.berlios.de/openocd/trunk@2820 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07Note bug in handling of variables through command line parameters.dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2819 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07Updates for "reset_config":dbrownell
- revert to previous default: don't talk JTAG during SRST - add "srst_nogates" flag, the converse of "srst_gates_jtag" - with no args, display the current configuration And update the User's Guide text with bullet lists to be a bit more clear. git-svn-id: svn://svn.berlios.de/openocd/trunk@2818 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07first stab at imx35 reset init scriptoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2817 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07remove recrusive reset invocation from reset init callbackoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2816 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07add timeouts and fix syntax error handling of mrc/mcr commands.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2815 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07add timeouts and fix syntax error handling of mrc/mcr commands.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2814 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07increase pause before reboot so web interface remains responsive when ↵oharboe
issuing a reboot of zy1000 git-svn-id: svn://svn.berlios.de/openocd/trunk@2813 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07Do not check ir capture if there is no IDCODEoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2812 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-071.55 snapshotoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2810 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07Change version labels to work better with GITdbrownell
- The guess-rev.sh script is now a tweaked version of "setlocalversion" as seen in Linux, U-Boot, and various other projects. When it finds source control support (git, hg, svn) it uses IDs from there. Else (specific to this project) it reports itself as "-snapshot", e.g. from gitweb. I verified this new "guess-rev.sh" script runs under Cygwin. - Also update the generic version strings to be like "0.3.0-dev" (during development) instead of the very long "0.3.0-in-development". These also show up in the PDF docs. For better tracking, we might eventually change these strings to include the version IDs too. - Change the startup banner version strings so they include the guess-rev output. Development and release versions with GIT will be like Open On-Chip Debugger 0.3.0-dev-00282-g7191a4f-dirty (2009-10-05-20:57) Open On-Chip Debugger 0.3.0 (2009-10-05-20:57) instead of the previous SVN-specific (even when using git-svn!) Open On-Chip Debugger 0.3.0-in-development (2009-10-05-01:39) svn:exported Open On-Chip Debugger 0.3.0 (2009-10-05-01:39) Release git-svn-id: svn://svn.berlios.de/openocd/trunk@2809 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-06Merge branch 'master' of ↵David Brownell
ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
2009-10-06Add basic support for DM6446 EVM board.dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2808 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-06Dragonite has the same EICE affliction as feroceon.dbrownell
From: Nicolas Pitre <nico@fluxnic.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@2807 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-06Dragonite target scriptdbrownell
From: Nicolas Pitre <nico@fluxnic.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@2806 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-06Merge branch 'master' of ↵David Brownell
ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
2009-10-06Introduced jtag_init and "jtag arp_init" to allow target scripts more ↵oharboe
control over how OpenOCD starts up and initializes the target. git-svn-id: svn://svn.berlios.de/openocd/trunk@2805 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-06stop using targetnumoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2804 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-06Take "patches" out of .gitignore ... Win32 is case-crazydbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2803 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05Merge branch 'master' of ↵David Brownell
ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
2009-10-05Add initial ".gitignore".dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2802 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05Merge branch 'master' of ↵David Brownell
ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
2009-10-05Improve jtag_validate_ircapture() diagnostics.dbrownell
Bugfix the error message so it shows the disliked value, and add a debug message showing each TAP's IR capture value, all N bits. This just changes diagnostics ... it still ignores the parameters given to us at TAP declaration time. git-svn-id: svn://svn.berlios.de/openocd/trunk@2801 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05Add a new JTAG "setup" event; use for better DaVinci ICEpick support.dbrownell
The model is that this fires after scanchain verification, when it's safe to call "jtag tapenable $TAPNAME". So it will fire as part of non-error paths of "init" and "reset" command processing. However it will *NOT* trigger during "jtag_reset" processing, which skips all scan chain verification, or after verification errors. ALSO: - switch DaVinci chips to use this new mechanism - log TAP activation/deactivation, since their IDCODEs aren't verified - unify "enum jtag_event" scripted event notifications - remove duplicative JTAG_TAP_EVENT_POST_RESET git-svn-id: svn://svn.berlios.de/openocd/trunk@2800 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05Minor cleanup to ARM926 debug entry:dbrownell
- don't needlessly export this function - handle "case 0" debug method-of-entry better (silent by default) The "case 0" is a valid debug entry mode so it doesn't deserve the warning int now gets. But it probably means that OpenOCD confused itself somehow; or that it confused the ARM9EJS target. git-svn-id: svn://svn.berlios.de/openocd/trunk@2799 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05Update the NEWS file to cover more of the user-visible changes.dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2798 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05Get rid of needless OMAP and Davinci target config optionsdbrownell
so they provide better examples and are easier to maintain. git-svn-id: svn://svn.berlios.de/openocd/trunk@2797 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02Updated reset event handling in omap3530 cfgmlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2796 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02It is not possible to invalidate I-Cache on memory writes while the target ↵mlu
is running git-svn-id: svn://svn.berlios.de/openocd/trunk@2795 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02Make sure that DSCR_DTR_RX is not full before writingmlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2794 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02More error reporting in Cortex_a8 execute_opcodemlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2793 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02Added asser_reset and deassert_reset for cortex_a8mlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2792 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02Added asser_reset and deassert_reset for cortex_a8mlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2791 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02Minor ETB and ETM bugfixes and doc updatesdbrownell
- ETB * report _actual_ hardware status, not just expected status * add a missing diagnostic on a potential ETB setup error * prefix any diagnostics with "ETB" - ETM * make "etm status" show ETM hardware status too, instead of just traceport status (which previously was fake, sigh) - Docs * flesh out "etm tracemode" docs a bit * clarify "etm status" ... previously it was traceport status * explain "etm trigger_percent" as a *traceport* option ETM+ETB tracing still isn't behaving, but now I can see that part of the reason is that the ETB turns itself off almost immediately after being enabled, and before collecting any data. git-svn-id: svn://svn.berlios.de/openocd/trunk@2790 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 17:35:06 +0000