aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-09-29Streamline Capture-IR validation codedbrownell
- Don't issue needless JTAG resets ... only do them after errors. Normal exit now leaves every TAP in BYPASS. - Fix an unlikely memory leak on one fault path. - Remove the oddball limitation that invalid capture LSBs trigger errors only for TAPs that support IDCODE. Re the JTAG reset: there are too many of them, and they can (and do!) change system state. So the needless ones should get removed. This one was especially pointless. git-svn-id: svn://svn.berlios.de/openocd/trunk@2777 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29ARM11 command handling fixesdbrownell
- Commands were supposed to have been "arm11 memwrite ..." not "memwrite ..." - Get rid of obfuscatory macros - Re-alphabetize - Add docs for "arm11 vcr" git-svn-id: svn://svn.berlios.de/openocd/trunk@2776 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29Make "-expected-id 0" suppress warnings; not unlike it used to do.dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2775 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29Doc updates: add section on target software changes, minor fixesdbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2774 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29ETM: fix build issue on MinGW.dbrownell
The Win32 global namespace is rather cluttered... git-svn-id: svn://svn.berlios.de/openocd/trunk@2773 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29ETB: cleanup needless symbol exports and forward decls.dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2772 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29handle single threadingoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2771 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29reentry assertoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2770 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29httpd smoketest infooharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2769 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29added t/nsrst_assert_width commandsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2768 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-28if srst pulls trst, then set state to TAP_RESET. oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2767 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-28spelling fixoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2766 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-28Shrink symbols exported from arm9tdmi.c and remove a forward ref.dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2765 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-27Add list of JTAG adapter drivers with TAP_RESET statemove bug.dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2764 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-27Update FT2232 driver so that it reliably enters TAP_RESET.dbrownell
When the OpenOCD server starts up it records its state as TAP_RESET, even though it could be anything. Then when it starts to examine the scan chain, it calls jtag_add_tlr() which sees it doesn't have any work to do, and so it does nothing. This can make the next operations fail because they start from the wrong TAP state... Instead of caring about the current recorded state, always enter TAP_RESET by forcing five clocks with TMS high. (NOTE: it seems most other JTAG adapter drivers have this same bug.) git-svn-id: svn://svn.berlios.de/openocd/trunk@2763 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-27Don't provide invalid OMAP5912 IR capture value/mask attributesdbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2762 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-26On DM355 EVM board, associate NAND chips with $_TARGETNAMEdbrownell
instead of a target number. git-svn-id: svn://svn.berlios.de/openocd/trunk@2761 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-26Diagnostics tweaks for jtag_examine_chain() failure paths.dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2760 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-26Updates to the initial scanchain validation code:dbrownell
- minor bug fixes - code cleanup - update comments - improve diagnostics - etc git-svn-id: svn://svn.berlios.de/openocd/trunk@2759 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-26Streamline Capture-IR handling and integrity test.dbrownell
Change the handling of the "-ircapture" and "-irmask" parameters to be slightly more sensible, given that the JTAG spec describes what is required, and that we already require that conformance in one place. IR scan returns some bitstring with LSBs "01". - First, provide and use default values that satisfy the IEEE spec. Existing TAP configs will override the defaults, but those parms are no longer required. - Second, warn if any TAP gets set up to violate the JTAG spec. It's likely a bug, but maybe not; else this should be an error. Improve the related diagnostics to say which TAP is affected. And associated minor fixes/cleanups to comments and diagnostics. git-svn-id: svn://svn.berlios.de/openocd/trunk@2758 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-25Update DM355 target config to know about ICEpick.dbrownell
Still defaults to nonstandard EMU0/EMU1 settings. git-svn-id: svn://svn.berlios.de/openocd/trunk@2757 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-25Michael Hasselberg <mh@open-engineering.de> target configuration files for ↵oharboe
Toshiba TX09 familiy git-svn-id: svn://svn.berlios.de/openocd/trunk@2756 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-25Try/catch scheme. Typed up the functionality and regression tested.oharboe
Ready for discussion and tiny patches that tries out this scheme. git-svn-id: svn://svn.berlios.de/openocd/trunk@2755 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-24When attaching GDB to OpenOCD, the target state is no longer affected.oharboe
Added gdb_sync feature that allows GDB to sync up to target state. Issue "monitor gdb_sync" and the next stepi, will return immediately with updated register values to GDB. git-svn-id: svn://svn.berlios.de/openocd/trunk@2754 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-23Start handling the (second) SRST stage of reset better:dbrownell
make sure that when there are two or more targets, their various pre/post event reports are correctly ordered. Previously, only the first target always saw its "pre" method before SRST was asserted or deasserted. git-svn-id: svn://svn.berlios.de/openocd/trunk@2753 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-23When setting up an ETM, cache its ETM_CONFIG register. Thendbrownell
only expose the registers which are actually present. They could be missing for two basic reasons: - This version might not support them at all; e.g. ETMv1.1 doesn't have some control/status registers. (My sample of ARM9 boards shows all with ETMv1.3 support, FWIW.) - The configuration on this chip may not populate as many registers as possible; e.g. only two data value comparators instead of eight. Includes a bugfix in the "etm info" command: only one of the two registers is missing on older silicon, so show the first one before bailing. Update ETM usage docs to explain that those registers need to be written to configure what is traced, and that some ETM configs are not yet handled. Also, give some examples of the kinds of constrained trace which could be arranged. git-svn-id: svn://svn.berlios.de/openocd/trunk@2752 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-23Start cleaning up ETM register handling. On one ARM926 ETM+ETBdbrownell
system, removes 20 non-existent registers ... but still includes over 45 (!) ETM registers which don't even exist there ... - Integrate the various tables to get one struct per register - Get rid of needless per-register dynamic allocation - Double check list of registers: * Remove sixteen (!) non-registers for data comparators * Remove four registers that imply newer ETM than we support * Change some names to match current architecture specs - Handle more register info * some are write-only * some are read-only * record which versions have them, just in case - Reorganize the registers to facilitate removing the extras * group e.g. comparator/counter #N registers together * add and use lookup-by-ID git-svn-id: svn://svn.berlios.de/openocd/trunk@2751 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-23Initial ETM cleanups. Most of these are cosmetic:dbrownell
- Add a header comment - Line up the ETM context struct, pack it a bit - Remove unused context_id (this doesn't support ETMv2 yet) - Make most functions static - Remove unused string table and other needless lines of code - Correct "tracemode" helptext Also provide and use an etm_reg_lookup() to find entries in the ETM register cache. This will help cope with corrected contents of that cache, which doesn't include entires for non-existent registers. git-svn-id: svn://svn.berlios.de/openocd/trunk@2750 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-23Nico Coesel <ncoesel@dealogic.nl> fix warnings. . I'm wondering why theseoharboe
didn't turn up earlier. Is everyone still using gcc 3.x? Or is the x86 version of gcc 4.x much more relaxed? git-svn-id: svn://svn.berlios.de/openocd/trunk@2749 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-22- fix build issue under win32 (cygwin/msys) from svn r2746ntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@2748 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-22- add missing svn props from previous commitntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@2747 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-22Make it easier to erase or protect through to the enddbrownell
of a (NOR) flash chip: allow passing "last" as an alias for the number of the last sector. Improve several aspects of error checking while we're at it. From: Johnny Halfmoon <jhalfmoon@milksnot.com> git-svn-id: svn://svn.berlios.de/openocd/trunk@2746 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21Update presentation of TAP events and tap enable/disable.dbrownell
Highlight that the "post-reset" event kicks in before the scan chain is validated, which limits what can be done in a post-reset handler. git-svn-id: svn://svn.berlios.de/openocd/trunk@2745 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21Remove annoying end-of-line whitespace from doc/* files.dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2744 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21Remove annoying end-of-line whitespace from tcl/* filesdbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2743 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21Remove annoying end-of-line whitespace from most src/*dbrownell
files; omitted src/httpd git-svn-id: svn://svn.berlios.de/openocd/trunk@2742 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21Ethan Eade <ethan@evolution.com> board config script for Cogent CSB732 ↵oharboe
i.MX35 (arm1136) git-svn-id: svn://svn.berlios.de/openocd/trunk@2741 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21Ensure that DaVinci chips can't start with a too-fast JTAG clock.dbrownell
It can be sped up later, once it's known the PLLs are active. Note that modern tools from TI all use adaptive clocking; and that if that's done with OpenOCD, "too fast" is also a non-issue. git-svn-id: svn://svn.berlios.de/openocd/trunk@2740 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21Update the jtag-examine_chain() logic to verify that there's nodbrownell
garbage after the expected data (from the TAPs' BYPASS or IDCODE registers). NOTE that there was previously some code that looked like it was trying to do this ... which didn't work, because it was looping over the list of expected TAPs, and never checked *after* that list completed! That could hide some *nasty* reset issues... Also replace a now-obsolete scanchain length test with one that behaves correctly; and update reporting of unexpected IDCODEs. git-svn-id: svn://svn.berlios.de/openocd/trunk@2739 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-20Enhancement: stm32 flash protection error messagedbrownell
This patch modifies an error message which, in its original state, I find somewhat unhelpful. So a small hint was added. Signed-off-by: Johnny Halfmoon <jhalfmoon at milksnot.com> git-svn-id: svn://svn.berlios.de/openocd/trunk@2738 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-20Update the User's Guide to cover the scan chain verification stepdbrownell
done on exit from the config stage, how JTAG clocking issues can trigger errors there, and how to avoid such problems. git-svn-id: svn://svn.berlios.de/openocd/trunk@2737 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-20Debug message updates:dbrownell
- Shrink messaging during resets, primarily by getting rid of "nothing happened" noise that hides *useful* information. - Improve: the "no IDCODE" message by identifying which tap only supports BYPASS; and the TAP event strings. Related minor code updates: - Remove two needless tests when examining the chain: we know we have a TAP, and that all TAPs have names. - Clean up two loops, turning "while"s into "for"s which better show what's actually being done. git-svn-id: svn://svn.berlios.de/openocd/trunk@2736 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-20Minor regression bugfix for the jtag_tap_handle_event() casedbrownell
for disabling TAPs. We don't actually know how to make any JRCs which do that yet; but when we do, this will matter. git-svn-id: svn://svn.berlios.de/openocd/trunk@2735 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-19Added CPUDBG_WCR_BASE definemlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2734 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-19Avoid cache invalidation when writing to hardware debug registersmlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2733 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-19Reduced sleep time after reset mlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2732 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-19Style cleanup for the updated ft2232_add_pathmove().dbrownell
Indentation, whitespace, line lengths. git-svn-id: svn://svn.berlios.de/openocd/trunk@2731 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-19Minor behavior fixes for the two JTAG reset events (C/internal,dbrownell
and Tcl/external): - Reorder so *both* paths (TCK/TMS or TRST) can enable TAPs with ICEpick ... first C code flags TAPs that got disabled, then call any Tcl code that might want to re-enable them. - Always call the C/internal handlers when JTAG operations can be issued; previously that wasn't done when TRST was used. Plus some small cleanups (whitespace, strings, better messaging during debug and on some errors) to reset-related code. git-svn-id: svn://svn.berlios.de/openocd/trunk@2730 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-19Minor tweaks to description of JTAG adapter/dongle issues.dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2729 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-18Move Cortex A8 debug access initialisation from omap3530.cfg to cortex_a8.cmlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2728 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-20 22:34:48 +0000