aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-29interface/ftdi: remove "untested" warning from DP BusblasterPaul Fertser
This is reported as working by mitsakos on IRC. Change-Id: I26b97779c3e8e237c5b3996aa81183031b12ec0c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1419 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-28targets: fix target_type name for Cortex-A targetsPaul Fertser
Commit d9ba56c295f057e716519a798bf9cdb4898c24f4 did a bunch of renaming of cortex_a8 to cortex_a, including the names in config files. However that introduced a regression as the name in target_type struct remained unchanged. This adds the last missing bit: actual renaming of the target name as understood by OpenOCD. Also change the (hopefully) last instance of using it in the supplied config files, namely from imx6.cfg. Change-Id: Ib9289fc6d946630133ec6e36c20015ccb50acf61 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1420 Tested-by: jenkins Reviewed-by: Chris Johns <chrisj@rtems.org> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10remote_bitbang: De-duplicate init code and clean up on errorAndreas Fritiofson
Change-Id: I8be413a9e1683f96f835232f9ff25d9bd42099de Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1380 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10remote_bitbang: Convert to use getaddrinfo()Andreas Fritiofson
Since gethostbyname() is deprecated and inconvenient, rewrite to use getaddrinfo() using an implementation more or less copied from its man page. This automatically enables support for IPv6. This also fixes a FTBFS on ARM due to alignment issues. Change-Id: I990a49506cac4b26faf77587937e506138371f7c Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1379 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10Added functionality to the SYS_SYSTEM semihosting call.Brandon Warhurst
There seems to be a few missing semihosting calls. I am not sure why this one is actually missing, since it seems simple enough to implement. It was tested using an HTC HD7 connected to openocd through a "home brew" ftdi 4232H board. Change-Id: Ie17dc96c6d48227a3dc9ff1e21201a85498a10b1 Signed-off-by: Brandon Warhurst <roboknight@gmail.com> Reviewed-on: http://openocd.zylin.com/1345 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10Added: RTOS awareness for embKernelRavaz
Change-Id: I98b60f50a5fc486bda83b83ad7ec73826ee11607 Signed-off-by: Ravaz <embkernel@gmail.com> Reviewed-on: http://openocd.zylin.com/1334 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10stm32 configs: use 4kB working area size by defaultPaul Fertser
This is needed for configs that might be used with the cheapest STM32F100 parts that have only 4kB SRAM. Restrictions for the other STM32 families are verified to be set appropriately. Change-Id: I1ad2370435015604db9f27c1a76c153480311a28 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1378 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-08telnet_server: support C-p, C-n for moving through historyPaul Fertser
This modifies telnet server to allow using common readline combinations to move up/down history, without the need to touch cursor keys. Change-Id: Ib659075883e91794b44f391f7c29bbdfdd679d10 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1376 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-05-08efm32: fix FTBFS on ARM due to alignment issuesPaul Fertser
The following warnings prevent OpenOCD from building: efm32.c: In function 'efm32x_read_lock_data': efm32.c:373:8: error: cast increases required alignment of target type [-Werror=cast-align] efm32.c:386:9: error: cast increases required alignment of target type [-Werror=cast-align] efm32.c:394:9: error: cast increases required alignment of target type [-Werror=cast-align] efm32.c:402:9: error: cast increases required alignment of target type [-Werror=cast-align] efm32.c: In function 'efm32x_get_page_lock': efm32.c:430:17: error: cast increases required alignment of target type [-Werror=cast-align] efm32.c: In function 'efm32x_set_page_lock': efm32.c:441:19: error: cast increases required alignment of target type [-Werror=cast-align] cc1: all warnings being treated as errors This patch is compile-tested only. Change-Id: Ia3a8f342e0f5e30c8ea4de9435c5c7a80bc100e3 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1370 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-05-08sysfsgpio: do not try to initialise absent signalsPaul Fertser
When e.g. SRST is not specified, the current code results in assigning 0 to srst_fd and subsequently a stray '1' is output on screen on reset. Avoid this by not doing bogus initialisation. Change-Id: Iadb847a384a927ae746124cf6e4e3c6cc8b11406 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1375 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-05-06jtag/adapter: add connect_[de]assert_srst to reset_config usagePaul Fertser
Add the connect under reset options to the online help for reset_config. Change-Id: I4b9a87b234de01531390b39b898a848841d1e834 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1377 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-05-06gdb_server: remove target_handle_event from gdb event callbackHsiangkai Wang
In target_call_event_callbacks(), it will execute 1. target_handle_event (use Jim_EvalObj() to evaluate event statements in config files) 2. call user registered callbacks Before calling user registered callbacks, target_handle_event has been executed. So, there is no need to call target_handle_event() in gdb event callback. It will execute event statements in config files twice. Change-Id: I84629e324fa3eb909907badf2319b4138ba89f07 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1372 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-05-05Restore normal development cycleFreddie Chopin
1. Archive NEWS for 0.7.0 release 2. Add new blank NEWS file 3. Bump version to 0.8.0 and restore "-dev" suffix Change-Id: I21febc042faeed294f3beeb5e683535dbf011e8f Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-05-05The openocd-0.7.0 release.v0.7.0Freddie Chopin
Change-Id: I08157f47ac056e6d2089119dd2d6cbab11b521e8 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-05-02doc: add info about FT232H and JTAG-lock-pick Tiny 2 adapterFreddie Chopin
Change-Id: I3b1047580669da3f17ea87183536275a10671fec Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/1367 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-02doc: Update list of interfaces, targets and boardsFreddie Chopin
Change-Id: If9481e061f09a37f9ee3c461a1a0ce4d382a9a0d Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/1366 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-02dev-doc: fix to release process docsFreddie Chopin
Change-Id: I916e7ff1af211baef1c6d56fd44d292ee6983599 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/1368 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-02cfg: remove whitespaceSpencer Oliver
Change-Id: I20edbb50efc03711195102f4c6dc8bcfaf043d44 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1374 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-05-02cfg: ignore ICEPick jrc tap versionSpencer Oliver
Due to reports of newer targets using a updated version of the ICEPick tap rather than add another tapid we ignore the tap version. Also see Trac 49 for details. Change-Id: Ic78414c54af2545c817e1bb2c860970c1b587259 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1373 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-04-28Restore -dev suffixFreddie Chopin
Change-Id: I26f49e02d228b59533237607fa8307ecc627409e Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28The openocd-0.7.0-rc2 release candidate.v0.7.0-rc2Freddie Chopin
Change-Id: I0a3576dd098d73437547b619c726cacd8f1dba64 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28target: rename cortex_a8 to cortex_aSpencer Oliver
Rename cortex_a8 target to use a more correct cortex_a name. This also adds a deprecated_name var so that older scripts issue a warning to update the target name. cfg files have also been updated to the new target name. Change-Id: I0eb1429c9281321efeb444b27a662a941a2ab67f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1130 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28target: rename cortex_m3 to cortex_mSpencer Oliver
Rename cortex_m3 target to use a more correct cortex_m name. This also adds a deprecated_name var so that older scripts issue a warning to update the target name. cfg files have also been updated to the new target name. Change-Id: Ia8429f38e88da677249c5caa560c50f8ce56ea10 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1129 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28Mention "lpc4300" (with "lpc1800" alias) flash drivers in manualFreddie Chopin
Change-Id: I0bb28910b2c07b1ca5bd644e0d88b931d585d3e7 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/1352 Tested-by: jenkins
2013-04-28cortex_m: remove old target breakpoints/watchpointsSpencer Oliver
Sometimes the target may have breakpoint registers set from a previous debug session, we can either sync them or as we have chosen here clear them. Change-Id: I439a623ebbf010246a70e5596d04aa7d546da731 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1363 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28kinetis: fix "SF1" parts to limit FlexRAM usageChristopher Kilgour
Ensure FlexRAM usage is limited to half the FlexRAM size when programming. Assume the FlexNVM sector size is equal to half the FlexRAM. Fix sector erase checking which had an error introduced when the kinetis_ftfx_command( ) signature was changed. Change-Id: I88edd9c7d4a4ba474cad7b00052feaeedfa8ced8 Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://openocd.zylin.com/1358 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28build: fix libftd2xx regressionSpencer Oliver
Fix build when targeting closed src ftd2xx drivers. configure is unable to find the dynamic linking loader lib (dl) as it is included before ftd2xx library. Change-Id: Ibe7308b66ed846288a31f7a27ff549b6f39baeec Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1355 Tested-by: jenkins Reviewed-by: Luca Bruno <lucab@debian.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28arm: fix arm reg regressionSpencer Oliver
Seems commit fc2abe63fd3cea7497da7be2955d333bd3f800b9 caused a regression in that the arm reg cmd no longer worked. The issue was caused because we changed the value of ARM_MODE_THREAD which was being checked in arm_init_arch_info. Change-Id: Id571d4ab336d1b0e2b93363147af245d24b65ca5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1362 Tested-by: jenkins Reviewed-by: Luca Bruno <lucab@debian.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28build fix: ft2232Oleksij Rempel
fix build with-ftd2xx-lib Change-Id: I4a9b5d204c29b7a0714a59494b2b5f959c73f99b Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/1359 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28gdb server: Fix bug. Parse 'M' packet error.Hsiangkai Wang
The format of 'M' packet is 'M addr,length:XX...'. The data follows ':' immediately. No need to '+2' to SEPARATOR in unhexify(), because SEPARATOR points to data correctly. Change-Id: I15b5758b540816cc727752e7bf68cd45e623f603 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1360 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-22Update NEWSSpencer Oliver
Change-Id: Icfc1245552a400232988cf44f54e5c46af1db873 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1356 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-04-21Restore -dev suffixFreddie Chopin
Change-Id: I3662c5993766a76d6dd62b919c56cc059c4e50d4 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-21The openocd-0.7.0-rc1 release candidate.v0.7.0-rc1Freddie Chopin
Change-Id: I2992c31b56b88062cdd8a8208506a61f6367fcbf Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-21Add "lpc1800" alias for "lpc4300" flash driverFreddie Chopin
Change-Id: I6d2bb9105cc778bd1d21580022529d684c3b21b0 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/1351 Tested-by: jenkins
2013-04-21flash/nor: add lpc4300 variant to lpc2000 driverMatt Dittrich
This patch adds flash programming support for internal flash of the LPC43x2/3/5/7 part, tested on a LPC4337 (also tested on a LPC1768 and LPC2468). It should also work with LPC1800's with onchip flash. The "base" parameter of the "flash bank" command is now significant for the lpc4300 variant and required to determine the bank number parameter needed by the IAP routines. NOTE: I could only program flash successfully when the chip is powered with "P2_7" pulled low to put it in ISP mode. When running from flash (and not the ISP ROM), the target fails to halt and the sector erase fails. This is similar to the behavior I remember when trying out the spifi driver on a LPC4350... lots of power cycles to make progress, one To burn, one to run. So I am not confident my config is set up correctly. Change-Id: I8a75ef1b95cedd5b5898b2dedff477f502fd19f3 Signed-off-by: Matt Dittrich <mdittrich.dev@gmail.com> Reviewed-on: http://openocd.zylin.com/1126 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2013-04-21Improve HACKINGFreddie Chopin
Reword info about creating SSH key - it's not required to add it to Github account. Mention adding created SSH key to Gerrit account - without this step it's not possible to access Gerrit in further steps. Change-Id: Ibd81521fbe47d4b4beae0b77cdc9d939fd3ee20c Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/1350 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-04-21telnet: add telnet history supportSpencer Oliver
adapted from Yoshinori Sato's patch: https://github.com/ysat0/openocd/commit/2f07f4600a0da8206612d78c159bbe1171aa41c2 Change-Id: I084b86d316b0aa6e9593f007c024961dbda805e9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1310 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-21Support newer OSBDM firmwareR. Steve McKown
OSBDM: add new VID:PID implemented in OSJTAG/OSBDM firmware somewhere between versions 30.13 and 31.21. PFLASH programming works with this patch, tested on a Freescale Kinetis TWR-K20D72M using its onboard OSBDM JTAG adapter. Note: flash program testing required hacking kinetis_write() to force longword programming, as the FTFL program section commands formulated by kinetis_write() currently fail on this board's PK20DX256VLL7 processor. Change-Id: Ib7b92ff2fe9ebf6158fb1489f554a19e96cd9651 Signed-off-by: R. Steve McKown <rsmckown@gmail.com> Reviewed-on: http://openocd.zylin.com/1348 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-21stm32f30x: Add boundary scan TAP ID to match siliconAndreas Fritiofson
Change-Id: I74ef3cfc437540aedd99da46ac3e0c6cd9c5cd8d Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1354 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-20mips: m4k alternate pracc code. Patch 4Salvador Arroyo
Now all the functions with only fetch accesses are modified. The same delay between scans has been added to mips32_pracc_fastdata_xfer(), it should work at the same scan rates as the other pracc functions, but it needs higher scan_delays to work. Change-Id: Ifb31d8ea6de9d22674385782913d221a2494dbbf Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/1196 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-20mips: m4k alternate pracc code. Patch 3Salvador Arroyo
Functions mips32_pracc_read_mem(), mips32_cp0_read() and mips32_pracc_read_regs() are now modified. mips32_cp0_read() is very similar to mips32_read_u32() with one store access. mips32_pracc_read_regs() is the only function that can not be executed from only one queue. Now this function is modified to use reg8, it saves all the registers but does not restore reg8. To remedy this, mips_ejtag_config_step() is called after mips32_save_context() in mips_m4k_debug_entry(). Function mips_ejtag_config_step() is modified to use reg8 and restore it from ejtag info instead of using DeSave for save/restore. Change-Id: Icc224f6d7e41abdec94199483401cb512cc0b450 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/1195 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-20mips: m4k alternate pracc code. Patch 2Salvador Arroyo
Each pracc function defines a variable ctx of type struct pracc_queue_info. To simplify the code tree auxiliary functions are defined: pracc_queue_init(), pracc_add() and pracc_queue_free(). The second parameter in pracc_add() is the store address if the instruction is a store at dmseg, otherwise it should be 0. The code is executed by mips32_pracc_queue_exec(). If ejtag_info->mode is 0 mips32_pracc_exec() is called and it should work like with current code. To generate the delay between scans the number of clock ticks are calculated with the help of jtag_get_speed_khz(). Due to delays in the execution of each single ftdi instruction the number of ticks are higher as it should be, specially at higher scan rates. mips32_pracc_read_u32() should now work with the new code. Change-Id: I471590a4fc89b56af10bd46c48767b4c64de154f Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/1194 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-20mips: m4k alternate pracc code. Patch 1Salvador Arroyo
This patch and the following patches define another way of doing processor access without the need to read back the pracc address as needed in current pracc code. Current pracc code is executed linearly and unconditionally. The processor starts execution at 0xff200200 and the fetch address is ever incremented by 4, including the last instruction in the delay slot of the branch to start. Most of the processor accesses are fetch and some are store accesses. After a previous patch regarding the way of restoring registers (reg8 and reg9), there are no load processor accesses. The pracc address for a store depends only on the store instruction given before. m4k core has a 5 stage pipeline and the memory access is done in the 3rth stage. This means that the store access will not arrive immediately after a store instruction, it appears after another instruction enters the pipeline. For reference: MD00249 mips32 m4k manual. A new struct pracc_queue_info is defined to help each function in generating the code. The field pracc_list holds in the lower half the list of instructions and in the upper half the store addressess, if any. In this way the list can be used by current code or by the new one to generate the sequence of pracc accesses. For every pracc access only one scan to register "all" is used by calling the new function mips_ejtag_add_scan_96(). This function does not call jtag_execute_queue(), all the scans needed can be queued before calling for execution. The pracc bit is not checked before execution, is checked after the queue has been executed. Without calling the wait function the code works much faster, but the scan frequency must be limited. For pic32mx with core clock at 4Mhz works up to 600Khz and with 8Mhz up to 1200. To increase the scan frequency a delay between scans is added by calling jtag_add_cloks(). A time delay in nano seconds is stored in scan_delay, a new field in ejtag_info, and a handler is provided for it. A mode field is added to ejtag_info to hold the working mode. If a time delay of 2ms (2000000 ns) or higher is set, current code is executed, if lower, new code is executed. Initial default values are set in function mips32_init_arch_info. A reset does not change this settings. Change-Id: I266bdb386b24744435b6e29d8489a68c0c15ff65 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/1193 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-20Improve clone command in READMEFreddie Chopin
Without the explicit dir at the end the repository will be cloned to "code". Change-Id: Icd8b55b4ba74f23b214c3844e2fb785377768119 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/1349 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: jenkins
2013-04-19stm32w: Added sample target configuration for STM32W108 with STLink-V2Ben Nahill
As requested, here is the target configuration that I'm using for an STLink-V2-attached STM32W108C8. For some reason, it only seems to work with "reset_config trst_only". Change-Id: Icbff4f83343e1f505d8afdfc53ff6f8b7496cac9 Signed-off-by: Ben Nahill <bnahill@gmail.com> Reviewed-on: http://openocd.zylin.com/1347 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-17topic: STM32W support added to em357 driverBen Nahill
The em357 driver only supported one page configuration (192k in 96 2048k) pages. This is fine for em357 chips since that's the size they have, but ST's STM32W chips (pretty much the same) have different flash configurations available (64, 128, 192, 256k). I can't find anywhere that would indicate the size of the chip anywhere in memory so the selection must be manual, using the 'size' parameter. For backwards compatibility, any size not known to be in use defaults to the 192k configuration. I don't have any em357 devices to test, but I also found that I had to re-assert the FPEC clock enable before performing an erase. This is a single line and shouldn't break any configurations. My testing so far has only been with a 64k device with 8k of RAM. Change-Id: Ic0ac400a9696efaa09d1407dd4a4d456bc2c318b Signed-off-by: Ben Nahill <bnahill@gmail.com> Reviewed-on: http://openocd.zylin.com/1336 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-04-17program: do not poll target after reset runSpencer Oliver
Disable polling the target before we issue a 'reset run'. This stops errors or warnings if the target disables the SWD or JTAG interface as part of the application code. Change-Id: I5019dffdad41a8e210003ece1caf89069ee0f223 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1331 Tested-by: jenkins
2013-04-17stlink: fix connect under reset issuesSpencer Oliver
We need to make sure that srst is asserted before we attempt to switch into jtag or swd mode otherwise we receive a error (-9) - invalid device id. Change-Id: I625166c751cfba8e8a5290f40122bb9afc9dbb39 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1315 Tested-by: jenkins
2013-04-17parport: fix parport_toggling_time regressionSpencer Oliver
If parport_toggling_time is called before the adapter speed has been configured then the call fails. Probably not the best fix, but does at least enable parport_toggling_time to be used again. This regression was added in commit 740b9e25b410c164e661d0334a9ea4168406726b Change-Id: I90300916d6bda5ef053c557e5ac136c4f002bdd1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1309 Tested-by: jenkins
2013-04-17ft2232: remove ft2232_large_scan memory leakAndreas Fritiofson
This is a very long outstanding issue see: http://lists.berlios.de/pipermail/openocd-development/2011-June/019404.html As this driver is deprecated the fix is added to purely to reduce the warnings reported by clang. Change-Id: I3a16a704e0e8db27efda50fdcfdd35abf5ebed0f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1278 Tested-by: jenkins
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-18 21:25:03 +0000