aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-02-10buikd: fix cygwin -mno-cygwin build errorSpencer Oliver
Remove duplicate inline that causes certain versions of gcc to choke. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-02-10cortex_a9: implement read/write memory through APB-APLuca Ellero
This patch adds read/write capability to memory addresses not accessible through AHB-AP (for example "boot ROM code"). To select AHB or APB, a "dap apsel" command must be issued: dap apsel 0 -> following memory accesses are through AHB dap apsel 1 -> following memory accesses are through APB NOTE: at the moment APB memory accesses are very slow, compared to AHB accesses. Work has to be done to get it faster (for example LDR/STR instead od LDRB/STRB) Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-02-10cortex_a9: fix dap_ap_select() usageAaron Carroll
Save, select and restore AP in cortex_a9_step and cortex_a9_init_debug_access. Fixes a bug where the wrong AP is selected after a reset. Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-02-08buspirate: Fix command parsing, fix errors to have more sense.Michal Demin
Signed-off-by: Michal Demin <michaldemin@gmail.com>
2011-02-08performance: committed wrong version of buf_set_buf optimizationMathias K
oops... Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-02-08omap4430: Add JRC TAPID for PandaBoard REV EA1 (PEAP platforms)Luca Ellero
PandaBoard REV EA1 (Panda Early Adopter Program) has a different ID. This patch add alternate REV EA1 TAP id to configuration file Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-02-08dsp563xx: add x, y and p memory accessMathias K
Hello, this patch add commands to access to x,y and p memory. For run time optimization some local jtag function was changed to static inline. Regards, Mathias
2011-02-08cortex_a8/a9: fix some commentsLuca Ellero
Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-02-08buf_set_buf around 30% speed increaseMathias K
Also i have checked the input of this function and in many cases a simple byte copy is possible. I have added this check now and is it possible the buffer is copied byte by byte and not bit by bit. With byte boundary input the test looks like this: buf_set_buf 0x02000000 iteration test: runtime (seconds): old: 6.828559 new: 0.436191 diff: 6.392368 runtime (seconds): old: 6.853636 new: 0.430389 diff: 6.423247 runtime (seconds): old: 6.794985 new: 0.423065 diff: 6.371920 Without: buf_set_buf 0x02000000 iteration test: runtime (seconds): old: 6.370869 new: 5.552624 diff: 0.818245 runtime (seconds): old: 6.420730 new: 5.665887 diff: 0.754843 runtime (seconds): old: 6.583306 new: 5.599021 diff: 0.984285 Regards, Mathias
2011-02-04stm32x: add support for STM32F20xØyvind Harboe
ready for wider testing and comments on basic erase + programming. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-02-03more changes to dsp563xx codeMathias K
Hello, this patch adds the missing cpu registers and the correct read/write register functions and fixed most of the halt/step/resume issues. The complete missing error propagation was added. + fix tab/spaces Regards, Mathias
2011-02-0324bit buffer supportMathias K
Hello, this patch add 24bit support to the target buffer functions and little/big endian functions. Regards, Mathias
2011-02-02omap4430: fix reset sequenceAaron Carroll
* Write to the PRM reset control register should have been 'phys'; * Setup empty reset-assert handlers for the M3's, since the board-level reset takes care of them; * Remove the dbginit cruft, because it gets called implicitly on reset. Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-02-02cortex_m3: allow scripts to override resetAaron Carroll
If a handler for the reset-assert event it present, skip the usual reset handling. This is needed, for example, for board-level resets. Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31error: remove debug output when reporting errorsØyvind Harboe
The user does not need to know or care about "command handlers". Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-31cfi: use ARM32 machine code on all CPUs but Cortex M3Øyvind Harboe
ARM11 broke with aa61a3b3d8b6acad19050987835ec05f3d298bdb as the code only checked for arm 7/9. CFI probably needs work for non-ARM targets but perhaps not adding working area memory to e.g. MIPS will give the default slow CFI support. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-31TCL configs for OMAP4430 and PandaboardAaron Carroll
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31cortex_a9: add source files for Cortex A9 support.Aaron Carroll
add target and build support for A9 Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31arm_dpm: add some SCR/RCR macrosAaron Carroll
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31Add '-coreid' target option to support multiple cores per TAP.Aaron Carroll
ARM Cortex-A9 multi-core chips expose a single TAP/DAP which connects to both cores. The '-coreid' option selects which core the target should connect to. Note that at present, OpenOCD can connect to either core, but not both simulatenously, until ADI contexts can be shared. Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31Add cscope to .gitignoreAaron Carroll
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31openocd.texi: minor fixes in Reset ConfigurationAaron Carroll
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-27add cortex-r4 etm id to dap infoMathias K
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-27- add xds100v2 configuaration fileMathias K
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-26Fixed small mistakes in at91sam3 info commandThomas Schmid
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-26add basic TI xds100v2 supportMathias K
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-26fix segfault from stack corruption in ahbap_debugport_initAndreas Fritiofson
ahbap_debugport_init was queueing reads to a local stack variable but didn't execute the queue before returning. Since the result of the reads are not used anyway, it's better to pass NULL as the destination instead of a dummy variable. I changed this throughout the function, even for the reads that were actually executed. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-19stellaris: automatically generate and update device IDsEric Wetzel
Added a Perl script to contrib that uses the header files in StellarisWare complete Firmware Development Package provided by TI/Luminary to generate a new list of device IDs Used Perl script and revision 6734 of TI/Luminary StellarisWare to update device IDs
2011-01-14Flash driver for em357Erik Botö
Hi, I took the stm32x NOR flash driver and adapted it for the Ember EM357 chip. This chip is very similar to em351 and stm32w so the driver should be easily extended to support those as well if anyone can get their hands on some of those for testing. changelog: Added NOR flash driver em357 Best regards, Erik Botö
2011-01-14str9xpec: Find flash controller from the chain.Santeri Salko
Find the flash controller by position since it is before the core, not after it. This fixes the problem that str9xpec enable_turbo (or any other str9xpec command) did not work. (See my post in http://forum.sparkfun.com/viewtopic.php?f=18&t=25542) Signed-off-by: Santeri Salko <santeri.salko@gmail.com>
2011-01-13transport: fix transport command args gaffesimon qian
the wrong index of argv. argv[0] is the command itself, argv[1] the the transport to select. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-13transport: fix LOG_DEBUG gaffesimon qian
LOG_DEBUG() arguments are only evaluated when DEBUG logging is enabled, do not use arguments that have side effects like foo++. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-10cfi: fix release build warningsSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-09nit: more LOG_* \n fixesEric Wetzel
Remove extra \n from LOG_DEBUG, LOG_INFO, and LOG_WARNING messages Remove LOG_INFO_N LOG_INFO_N was only used once and had a \n at the end Change LOG_USER_N calls that end with \n to LOG_USER
2011-01-09Add another level of procedures to LPC2xxx initialization - procedures for ↵Freddie Chopin
specific targets (setup_lpc<number>) take core clock and adapter clock as parameters. This way "constant" parameters (flash size and type, CPUTAPID, etc.) do not need to be copied if one wishes to change the "variable" parameters - like the core clock or adapter clock - in a board config file or somewhere else. Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2011-01-09present CM3 Trace agendaDavid Brownell
2011-01-07Add common LPC2xxx setup procedure, use in all LPC2xxx files.Freddie Chopin
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2011-01-06cfi: use safer arch detectionSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-06loader: update loader src for armv7-m archSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-06Add the support for the armv7m arch.Jonathan Dumaresq
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
2011-01-06Add the contrib file for the armv7m archJonathan Dumaresq
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
2011-01-05nit: do not add \n at end of LOG_ERROREric Wetzel
Fixed in many other places, and submitted in response to Øyvind's invitation.
2011-01-04mips32: add fastdata loader working areaSpencer Oliver
Add a working area that is preserved between calls to mips_m4k_bulk_write_memory - this gives us a speed increase of approx 3kb/sec during flash writes to the pic32mx. This area is released during a resume/reset. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-04target: change working area free data typeSpencer Oliver
We only use the struct working_area member 'free' as a true/false type so might as well use a bool data type. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-03nit: do not add \n at end of LOG_ERRORØyvind Harboe
This is done in many other places as well, patch to fix gratefully accepted!
2011-01-03error handling: the error number is not part of the user interfaceØyvind Harboe
Do not propagate error number to user. This is for internal programming purposes only. Error messages to the user is reported as text via LOG_ERROR(). Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-02actux3.cfg: add function to setup for u-boot debuggingMichael Schwingen
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-01-02cfi_protect is not implemented on Spansion flashes (many do not even have ↵Michael Schwingen
protection bits). Demote from error to warning, so that common board code can use "flash write_image erase unlock" regardless of the flash type. Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-01-02non-CFI flash code uses data from CFI structures. Make sure that timeouts ↵Michael Schwingen
are filled in on non-CFI flashes, and print CFI information in all cases, nut just on CFI flashes. Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-01-02svf: implement sleep for RUNTEST min_timeJon Povey
Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> min_time was effectively ignored, I needed it to program a Lattice MachXO which uses a RUNTEST to wait for an erase operation, amongst other things. With this patch pauses happen and I can program the device with an SVF generated in LSC ispVM (with "Rev D Standard" checked to suppress nonstandard LOOP statements)
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-20 03:59:04 +0000