aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-28cfg: add SWD configs for stellaris ftdi based adaptersSpencer Oliver
Tested on hardware. Change-Id: Ib0191e97988dc79e9a62da74bd7fe25f548ff5a2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2185 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins
2014-06-28tcl/interface/ftdi: add SWD configs for kt-link, olimex, rowley and resistor ↵Paul Fertser
hack Resistor hack is runtime-tested, other configs are based on schematics. Change-Id: I8daffa0434cd41d142fbec7c230a302284f7aa31 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2184 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-06-28jtag/drivers/ftdi: require defining SWD_EN signal for SWD modePaul Fertser
Use a special signal instead of a dedicated swd mask. Amend jtag-lock-pick_tiny_2 config accordingly. Change-Id: Ifb007a0b5434b590c52f936efd5f5458e913e2e4 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2183 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2014-06-28jtag/drivers/ftdi: declare standard JTAG signals on SWD initPaul Fertser
Unfortunately, this means they're available for config files only after selecting swd transport. Change-Id: Ia2afc1f3bfdba8d81efbb8ab964b174c0f7e2811 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2182 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-28jtag/drivers/ftdi: add option to declare signal aliasesPaul Fertser
This adds -alias|-nalias options to ftdi_layout_signal command that allow to declare a new signal based on an already defined one. Change-Id: I552578ebcd12ae21957a1c0d3b7e878adeff6df0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2181 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-28Auto-select JTAG transport when appropriatePaul Fertser
I looked through all the target configs after stripping comments and such from them with sed to see what jtag-specific commands can appear first, and it looks like all the meaningful combinations should be covered. Change-Id: I8d543407b7f4ac8aca7354ecd50e841c8a04d5f3 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2179 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-28Relax polling check if not in JTAG modeAndreas Fritiofson
Polling was disabled based on global variables jtag_trst and jtag_srst which were never touched in non-JTAG mode. Modify the check and remove the ugly workaround to avoid calls to a possibly uninitialized JTAG subsystem. Change-Id: I3b18c81e0fba7aaf35afe6f08c3fe8fa6f8443fd Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2143 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28cfg: Add SWD support to JTAG-lock-pick Tiny 2Andreas Fritiofson
Change-Id: I61eac507fa6861b7daf603ebca58e8bf3cc699c1 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2136 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28Add FTDI SWD driverAndreas Fritiofson
This is usable on most or all FTDI adapters using a small hardware tweak. TCK goes to SWCLK as expected. TDO should be wired to SWDIO. For TDI there are two options: Either add a 74HC126 or similar tri-state buffer between TDI and SWDIO, with OE controlled by a signal named SWDIO_OE. Or simply connect TDI and SWDIO together via a suitable resistor (220-470 ohms or so depending on the drive capability of the target and adapter). nSRST (and of course Vcc, GND) may be connected too but all other signals should be NC. Change-Id: Id36cf4577439be96bd4e5955c3026236e1cabced Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1958 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28transport: Constify the transports vectorAndreas Fritiofson
Change-Id: I0c874b5d4c97cf781d83bd381d701f770e069f72 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2135 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28swd: Add frequency setting and special/switching sequences to the APIAndreas Fritiofson
Change-Id: I6f3950374f2525a18bbcb9cbd340c447c20fb704 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2134 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28adi_v5: Make sure all bit masks are unsigned and wide enough.Andreas Fritiofson
Also align them with spaces instead of tabs. Change-Id: I1c01412a3ea77b29e8e133f5c92d05ed79d7c0f3 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2133 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28swd: Remove support for turnaround periods other than 1Andreas Fritiofson
ARM deprecated other trn periods in ADIv5.1 and one cycle is the only setting that is guaranteed to be implemented, as well as being the reset value in ADIv5.0. Thus it makes no sense supporting anything else. Change-Id: Iffa16bb0ce74788bca88fd3ace8a026148013d00 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2132 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28swd: Fix park bit polarity according to ADIv5.1 SupplementAndreas Fritiofson
Change-Id: I27293defd3f3c3bf37c9662f88689e85ba593d86 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2131 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28swd: Convert API to asynchronousAndreas Fritiofson
Change-Id: I859568dbb2ad4e92411980751c3f747bd70638b8 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1959 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28adi_v5_cmsis_dap.c: Simplify debugging outputAndrey Smirnov
Name of the function is already a part of the LOG_DEBUG macro, so there's no need to include it in the string itself. Change-Id: I18c3d5b746e9106d55104e490ccf5bc5e85cc380 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2138 Tested-by: jenkins
2014-06-28cortex_m: Do additional initialization during resetAndrey Smirnov
SAM4L requires additional steps to be taken right after SYSRESETREQ is issued in order to function robustly: - CMSIS-DAP DAP driver needs to explicitly check for sticky bit errors since it is possible for adapter to perform successful write opration, report no errors and then, under the hood, do some other things that will result in sticky bit being set. - Debugger needs to wait for security system to finish intialization and assert CDBGPWRUPACK before proceeding This change is related to commit http://openocd.zylin.com/#/c/1995/ Change-Id: I741c95a809bfd60d930cec9482239e4796a62326 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2088 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
2014-06-28adi_v5_cmisis_dap: Separate ABORT from clearing sticky errorsAndrey Smirnov
We don't need to do full blown AP ABORT in case of CMSIS-DAP errors, and the code that was in place was not doing that(issuing AP ABORT) anyway. Change-Id: Ide83b1f8875d725da6cb0d53aae8229f8c6316b3 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2112 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
2014-06-28drivers/cmsis_dap_usb: remove jtag reset hacksPaul Fertser
This should no longer be needed after tcl scripts are fixed to avoid calling jtag subcommands when jtag is not used. Barely tested with an frdm board. Change-Id: I75f02b088e6134562ae634417d97c48e377df6e9 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2130 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-28tcl: introduce using_(jtag|swd|hla) helpers and use them in reset handlerPaul Fertser
Barely tested with plain SWD transport. Change-Id: I48b59136bf4294ffed737dba01f1b30ef83aa86b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2003 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-28swd: Improve parity calculation and move it to types.hAndreas Fritiofson
It could be reused by SWD drivers and in other places. Change-Id: Ieed0cf70c111a73d3a42ed59f46a0cdd177a73d5 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1957 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28adi_v5_swd: Separate sticky error clearing from AP abortAndreas Fritiofson
Swd_queue_ap_abort should set DAPABORT, not only clear sticky errors. However, DAPABORT should not be set as soon as there is a single FAULT/WAIT response. It's an "emergency only" operations for use only when the AP have stalled the transfer for a long time. So these need to be separate functions. Change-Id: I37618447884faad54d846c2b07fa668ad505919d Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1956 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28adi_v5: Remove unused features of the DAP and SWD interfacesAndreas Fritiofson
These features are not currently used so remove or disable them before something starts to. Not having them around simplifies redesign of the APIs. Change-Id: Iad25cc71c48b68a1fa71558141bf14d5ab20d659 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1955 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28adi_v5_swd: Read RDBUFF once after a sequence of AP readsAndreas Fritiofson
Increases performance by a factor of two for long reads. Change-Id: I81a7a83835058560c6a53a43c3cc991100f01766 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1954 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28adi_v5: Remove strange IDCODE check from dap info handlerAndreas Fritiofson
Otherwise it breaks SWD targets. The check seems really weird anyway since it loops through *all* TAPs after the ADIv5 target but doesn't do anything at all with the result, other than not setting the return values despite returning ERROR_OK. Remove a bogus initialization that was needed because of the odd behaviour of this routine when an IDCODE wasn't found. Change-Id: Ic086352f6af868b3406b00420291a0a671e3acac Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1953 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28adi_v5_swd: Improve SWD supportFatih Aşıcı
Fix bug in parity calculation macro. Cache and update the selected DP bank when necessary. Add aborts when the Ack code signals a failure (we should really only clear the sticky bits, but this will do for now). Change-Id: I38a4da136ba1d9e989b33c1875a80c0b1b2be874 Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1950 Tested-by: jenkins
2014-06-22configure: fix formatting when "echo -n" is not supportedPaul Fertser
The -n option is non-standard and is unavailable on some systems (e.g. OS X's shell builtin). Change-Id: Ia2fed186dee5fa6da543944873d67ebee1d9354e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2172 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-22jtag/drivers/jlink: better diagnostics for RCLK problemsPaul Fertser
The JLink protocol description doesn't really specify it for JTAG-level commands but the real life evidence is that 0x01 error code means "Adaptive clocking timeout" as it does for e.g. WRITE_MEM_ARM79. Change-Id: I4e3b568742814271919f92d202713968c8fcccfb Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2169 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22flash: samd: add SAMD10 and SAMD11 part IDsAndrey Yurovsky
Add part IDs for the new SAMD10 and SAMD11 parts within the Atmel SAMD family, they have the same Flash controller as the other samd parts and should be supported by the at91samd driver. Compile-tested only. Change-Id: I493ae96a7d7e8d19e607fd9a4b6544a982be42b3 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/2170 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22tcl/target/fm3.cfg: use a CHIPNAME known by the flash driverPaul Fertser
fm3 flash driver needs to know which chip variant is used. This fixes "unknown fm3 variant: mb9bf500.cpu" error if the config is used as is. Change-Id: I500fcfb413f23ee246678cec5bd19d14139a28e2 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2160 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22target: arm_adi_v5: added types and subtypes based on latest coresight ↵Jiri Kastner
documentation while investigating coresight components, i've found some new partnumbers and devtypes. Change-Id: Ie68032b0b21d542c2084f80db38b06f5cd4c7591 Signed-off-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/2166 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22openrisc: add support for JTAG Serial PortFranck Jullien
Change-Id: I623a8c74bcca2edb5f996b69c02d73a6f67b7d34 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/2162 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22openrisc: restore current JTAG module while polling the CPUFranck Jullien
Change-Id: I93827afaa164d23a93bdddbfa864624b18473f45 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/2163 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22flash/nor/tcl.c: fix formatting in "rejected" error messagePaul Fertser
The error message (with the usage field unpopulated) looks like this, obviously missing at least a space before Usage: Error: 'fm3' driver rejected flash bank at 0x00000000Usage (null) Change-Id: I2a625676e784d02942823f972a201f7f4f810c68 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2161 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22svf: Only read TDO back from the device if we actually need to look at the bits.Joshua Wise
This results in a 90% speedup on USB-Blaster, which serializes repeated TDI input against TDO readback; program time on an 5CGXFC5C6F27 part was dropped from 2m30s to 9s. Signed-off-by: Joshua Wise <joshua@joshuawise.com> Change-Id: I92d5a8b800492283d619328549235b610528c338 Reviewed-on: http://openocd.zylin.com/2145 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22tcl/target/am335x.cfg: Drop gdb-attach stanzaTom Rini
This isn't needed nor a recommended practice now, was a simple copy/paste from amdm37x.cfg anyhow. Change-Id: I064226dc859d7563cfad945b577279fc37448645 Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2068 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-22efm32 : Added ZeroGecko family support.Nemui Trinomius
Added Cortex-M0plus "ZeroGecko" Family to flash driver. Tested on EFM32ZG222F32. Change-Id: I1660b34ef6ee04837e97581504fff0faf84d1c6d Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/1994 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22cortex_a: fix lockup when writing to high addressSeth LaForge
On a processor with caches, when you write data to memory OpenOCD invalidates the cache lines affected. If you write to an address within 64 bytes of UINT32_MAX, then the for loop control variable wrapped around resulting in an infinite loop. Change control variable to be an offset from the address involved. We should never be asked to write 2^32 bytes, so wraparound should not be a problem. Change-Id: Ibfe654113eff71684862ff651e7a1cd05ccc6760 Signed-off-by: Seth LaForge <sethml@google.com> Reviewed-on: http://openocd.zylin.com/2126 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-19cfg: Added Nucleo-F334R8 board config.Nemui Trinomius
It supports STLink/V2-1. Change-Id: I0a8c01247a7a0165321818ca222479e3ae67ce5c Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2175 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-19stm32f1x: add STM32F33x support.Nemui Trinomius
Added STM32F33x series to flash driver. Tested on NUCLEO-F334R8 board(STM32F334R8T6). Change-Id: I2fe70d40eb7613a7a3cfa63d25fa83f7bc055fb4 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2174 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-18flash/nor/kinetis: prevent segfaulting with an HLAPaul Fertser
HLAs do not provide direct DAP access, so the best we can do about it is skipping it. Change-Id: I877ef8fd2d86e40e7442a637cdba182cfd60e05a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2173 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-18tcl/board: add Atmel SAM4E-EKMarco Cruz
Change-Id: I07d7e0528ed4e88b070ba4e7598a193ec8e9e37d Signed-off-by: Marco Cruz <marco.caratuva@gmail.com> Reviewed-on: http://openocd.zylin.com/2158 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-18flash/nor/at91sam4: add SAM4E16 supportMarco Cruz
Change-Id: I7ab4750073c9d34812b690996eef76fccf70c627 Signed-off-by: Marco Cruz <marco.caratuva@gmail.com> Reviewed-on: http://openocd.zylin.com/2157 Reviewed-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-18README.OSX: mention Gentoo Prefix and clarify other optionsPaul Fertser
Change-Id: I431bfb9acf7dd6ad61b9e8f5c20568be22e9f39d Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2146 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-05target: or1k: remove wrong endian swap from or1k generic codeFranck Jullien
We don't need to swap the endianness in the target generic code. This swap is necessary because of the adv_debug_if debug unit. This patch moves this specific piece of code from or1k.c to or1k_du_adv.c. Change-Id: I3acea092fe6edfa79b4a87861b5f01204f071bf0 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1663 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01tcl/target/kl25.cfg: add maximum speed specificationPaul Fertser
Maximum frequency wasn't tested on hardware but the docs seem to be quite explicit and do not mention any restrictions for that. Change-Id: Idcf58df5358d06525e683f07c76eedad8f0b292d Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2120 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01tcl: add ASUS RT-N66U configPaul Fertser
CFI flashing verified with real hardware. RAM configuration wasn't attempted. Change-Id: I9185ab71430d799793befef708a15f62edba1663 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2153 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01jtag/drivers/osbdm: downgrade init message severity, fix wordingPaul Fertser
Change-Id: Iacf874b0fe9fbf840e82e6b63f1c97031f4720de Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2156 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01Flash/LPC2000: Add support for auto-probing flash sizeCosmin Gorgovan
Adds support for auto-probing on devices which support the IAP Read Part ID command. Includes IDs for all LPC17XX, LPC13XX, LPC11XX and LPC11XXX devices with publicly available user manuals. To use auto-probing, select the 'auto' lpc2000 variant. Change-Id: Ic617c32925c9ebe0e9d9192ed8ddbfa08e9f0aaa Signed-off-by: Cosmin Gorgovan <cosmin@linux-geek.org> Reviewed-on: http://openocd.zylin.com/2075 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-01Flash/LPC2000: Add support for LPC11(x)xx, LPC13xxCosmin Gorgovan
LPC11(x)xx and LPC13xx devices are mostly compatible with the lpc1700 variant of the LPC2000 driver, but use a fixed flash sector size of 4KB. Change-Id: I033515f4ff6bc61d3b9babd27096f78c99cea927 Signed-off-by: Cosmin Gorgovan <cosmin@linux-geek.org> Reviewed-on: http://openocd.zylin.com/2071 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 10:31:54 +0000