aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-14stm32: determine all cpu types and use common examineMathias K
This patch determine all cpu types and not only the cortex M3 and the stm32 target use the common target examine function from the cortex_m sources. Change-Id: If689dd994b3855284b927fc4b206f420cf32b6c7 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/511 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14flash: Fix flash write algorithm on pflash only devices.Mathias K
This patch fix the slow flash write issue on pflash only devices. The Family Reference Manual says: For devices with FlexNVM: FlexRAM For devices with program flash only: Programming acceleration RAM So the acceleration RAM is available for the flash section command on this device. Change-Id: If6541a23a4457c5ed8858848a145f35cac63138b Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/509 Tested-by: jenkins Reviewed-by: Tomas Frydrych <tf+openocd@r-finger.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14Automatically prepend v1 mass storage protocol.Mathias K
This patch prepend the v1 mass storage protocol to the command buffer and simplify the usb read/write handling. Change-Id: I709602600e93cd1eb5848fa9f4d15659ba85eb35 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/506 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14mips: Forced to running state to enable (subsequent) target halt.Drasko DRASKOVIC
Change-Id: I9aff8fb3ac703b50194088dd4e68cec8f9bb2ada Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com> Reviewed-on: http://openocd.zylin.com/513 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14cfg: correct pic32mx config typo'sSpencer Oliver
Change-Id: Ibe5b6b0efefc7cfc75d789eb7e9c7ee239526ae2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/508 Tested-by: jenkins
2012-03-13ecosboard: delete bit-rotted eCos codeØyvind Harboe
Change-Id: Iff7943eb9da3f41dcc45492acd0f36cf63b3497f Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/503 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: jenkins
2012-03-13jtag: basic support for P&E Micro OSBDM (aka OSJTAG) adapterJan Dakinevich
This driver provides support for the P&E Micro OSBDM adapter (sometimes named as OSJTAG), mounted on the Freescale TWRK60N512 bord. Thus, it provides a quick start when working with this board. The driver doesn't use BDM commands, but work with OSBDM adapter using only JTAG commands. Change-Id: Ibc3779538e666e07651d3136431e5d44344f3b07 Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com> Reviewed-on: http://openocd.zylin.com/492 Tested-by: jenkins Reviewed-by: Tomas Frydrych <tf+openocd@r-finger.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-13topic: Added support for the SAM3X/A variantsOlivier Schonken
Atmel introduced 7 new Cortex-M3 processors on 2012-02-28 SAM3X4C - 256KB flash SAM3X4E - 256KB flash SAM3X8C - 512KB flash SAM3X8E - 512KB flash SAM3X8H (Only on dev-kit - not in production...) - 512KB flash SAM3A4C - 256KB flash SAM3A8C - 256KB flash The SAM3X/A processors still suffer from the "6 waitstates needed to program device" errata. The CIDR address for the SAM3X/A processors are different from the other SAM3 processors. Unfortunately, the chip identification register is not at a constant address across all of the SAM3 series'. As a consequence, a simple heuristic is used to find where it's at... If the contents at the first address is zero, then we know that the second address is where the chip id register is. We can deduce this because for those SAM's that have the chip id @ 0x400e0940, the first address, 0x400e0740, is located in the memory map of the Power Management Controller (PMC). Furthermore, the address is not used by the PMC. So when read, the memory controller returns zero. Another interesting change is the flash bank address for flash bank 1. It is not fixed at 0x00100000 like the Sam3U. Bank 1 of the at91sam3a/x series starts at 0x00080000 + half the total flash size. Thus for the 256KB devices Bank 1 is located at 0x000A0000, and for the 512KB devices Bank 1 is located at 0x000C0000. The configuration files for the SAM3X/A processors will follow Change-Id: I6c3a707c00e05d993a2ad1d5a423f23b37ffd553 Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on: http://openocd.zylin.com/505 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-13docs: add stm32 dual bank exampleSpencer Oliver
Change-Id: I1dfe134e2c7694fc978d14b4b21bdf9c82ca4b16 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/507 Tested-by: jenkins
2012-03-13target: remove unused declarationSpencer Oliver
arm7_9_prepare_reset_halt is long since gone and the functionality is implemented in the target's assert_reset handler. Change-Id: Ib03c730cb39d68e5e3bb42f92af13daf8074e4e2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/515 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-11flash: retire unused eCos flash driverØyvind Harboe
even the AT91EB40a's flash is covered by CFI and nobody ever submitted any other drivers based on eCos code. It's just possible that this idea was missing documentation and "marketing", but it's in git if somebody wants to resurrect it. Change-Id: I66449aa6e0997301f9d67f28098789bfc891d6e9 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/502 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-11target_request: fix warning, do not set local variable to value it already hasØyvind Harboe
Change-Id: If29b0efdc326ee1ce4c07ec9d8777744d674f367 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/490 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-06flash: stm32f1x: add a couple missing stm32x_get_flash_regSzymon Modzelewski
Change-Id: I163de2c1bd962e7ea9ca6c741c1c62224c210677 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/486 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06flash: Additional check for NULL in str9xpec enable_turboFredrik Hederstierna
Change-Id: Ifde8783b27c64e4a4bbea180cfa2c86f6a9fe49a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/496 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-06stlink: fix incorrect pc console outputSpencer Oliver
target_call_event_callbacks needs to be called after debug entry otherwise we will get a console pc mismatch. Change-Id: I278137736d5e85ca9662c306f6ac81336d8eb6cf Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/499 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-06Add new configuration files for the Diolan LPC-4350-DB1 developmentJim Norris
board with the NXP LPC4350 processor. Change-Id: I0843e96af9ca05d3e598e2e16eb19fc0581ab46d Signed-off-by: Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/501 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06SAM3: Remove unused reference to SUPC registersAttila Kinali
The SUPC (Supply Controller) registers are on different base addresses on different SAM3 chips: SAM3U: 0x400e1210 SAM3N: 0x400e1410 SAM3S: 0x400e1410 This creates a problem with the sam3_reg_list array which is const, but would need to be changed at runtime to account for this variability. As this register is not used anywhere, it's simplest to just remove it. Change-Id: I987eb371648d826aa6d5e9de18d38c7bb66d6fca Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/495 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06SAM3: Add missing architecture names for SAM3S and SAM3NAttila Kinali
Change-Id: Ie2177487d4315219eb364db360cb7f88d2720783 Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/494 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06SAM3S: correct flash sector sizes.Attila Kinali
Lock region count and sector sizes did not match datasheet. (see 6500C-ATARM-8FE11 "SAM3S Series Datasheet", Table 7-1) Change-Id: Ic511802f96ed03856467a24a6736349205a0576a Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/493 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06config: fix typo in at91 configJaap de Jong
Change-Id: I596cbac3439456fcb02111caee6e8c290c12a6d5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/504 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-02-29stlink-v1: fix memory writesSzymon Modzelewski
implement stlink_usb_send and use it to fix stlink_usb_write_mem using two calls to stlink_usb_recv is inappropriate since each call issues a SG command on stlink-v1, resulting in errors Change-Id: I24ef9f2dda284e041dc4a532b59968a77eebe702 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/498 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29Revert "stlink-v1: fix memory writes"Spencer Oliver
I committed in the wrong order This reverts commit 79230a8e3c5b85601fca730dfc09ecc52e693afa Change-Id: Iace872ac4844891f4f38fca87448a2ebd9f17593 Reviewed-on: http://openocd.zylin.com/497 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29stlink-v1: code cleanupSzymon Modzelewski
This patch moves the bulk of the stlink read/write code into the stlink_usb_xfer set of functions and implements stlink_usb_recv in terms of the generic stlink_usb_xfer stlink_usb_xfer will be needed to implement stlink_usb_send without code duplication stlink_usb_xfer: -sends the stlink command -performs a read or write (as requested) -checks the status (v1 only) Change-Id: I0137d52620bd4883d46c9977a9e73f67622000a1 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/477 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29Fix assert to check flash programming offsetAttila Kinali
The assert introduced in 00c864835149a96b431fc8f31dd89542d88fd383 checks whether the programming offset equals to page_size of the flash, while it wants to check whether the offset is a multiple of the page_size. Change-Id: I794d021951a28c1cc520b5eea5d500f097721b06 Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/482 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-02-29flash: add stm32lx High Density DevicesSpencer Oliver
Change-Id: Ieed9de4b078e1ebf659054a758b4f69acdf5b83e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/466 Tested-by: jenkins
2012-02-29flash: change stm32lx driver probe behaviourSpencer Oliver
Currently stm32lx flash driver will remove the readout protection if set during a probe. This may not be what the user wants, so let them decide. Change-Id: I8575e3b339b10a4f7bac57cca9586dcab513d347 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/465 Tested-by: jenkins
2012-02-29stlink-v1: fix memory writesSzymon Modzelewski
implement stlink_usb_send and use it to fix stlink_usb_write_mem using two calls to stlink_usb_recv is inappropriate since each call issues a SG command on stlink-v1, resulting in errors Change-Id: I52ff9ee8f5d9ae0d47356477468eb98952205c99 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/478 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-27flash: add new devices to pic32mx flash driverSpencer Oliver
update as per DS61145 rev J Change-Id: I2b5da84248ff2f44c7ca9d2ed1c52db453714c05 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/461 Tested-by: jenkins
2012-02-27cfg: Beaglebone/AM335x refactorNeil Jensen
Split out functions specific to the AM335x SOC into the target directory and simplified the board config file. This should allow one to quickly create new configs for boards based on the TI processor family. Change-Id: I0c3db97950dfa832f1f1918fc10c180f068bba74 Signed-off-by: Neil Jensen <neil30al@gmail.com> Reviewed-on: http://openocd.zylin.com/489 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-27cfg: beaglebone cleanupNeil Jensen
Simplified the configuration and removed things that were not necessary for debugging. Also added reset configuration. Signed-off-by: Neil Jensen <neil30al@gmail.com> Change-Id: I96f991c3051aa68278212cd6509484cbce40ccb7 Reviewed-on: http://openocd.zylin.com/488 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-26jtag: use correct tap -ignore-version maskSpencer Oliver
when -ignore-version is used we should mask of the upper 4bits not 8bits. Change-Id: I9ffe24c2aeeb414677357a647609fdf018890194 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/473 Tested-by: jenkins
2012-02-26jtag: fix cmd scan_chain expected_ids bugSpencer Oliver
This fixes scan_chain to correctly print all the expected_ids. Change-Id: I93738980d85e0fe369d40c58b19339424d37ec34 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/474 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-26flash: add stm32f2x async flash loaderSpencer Oliver
This enable the stm32f2x flash driver to use the asynchronous algorithm support. Speed increase is as follows: before - wrote 1048576 bytes from file stm32f4x.bin in 30.453804s (33.625 KiB/s) after - wrote 1048576 bytes from file stm32f4x.bin in 23.679497s (43.244 KiB/s) This also fixes a bug that was in the old flash loader. The old loader waited while bit16 of the status reg was 0, the new loader waits until this bit is 0 as stated in the flash spec. Bizarrely this bug did not effect programming on any tested parts. Change-Id: I3efc94d42cbe81283673a8f4203700638080af6e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/460 Tested-by: jenkins
2012-02-26flash: add stellaris async flash loaderSpencer Oliver
This enable the Stellaris flash driver to use the asynchronous algorithm support. Speed increase is as follows: before - wrote 65536 bytes from file test.bin in 5.486040s (11.666 KiB/s) after - wrote 65536 bytes from file test.bin in 2.274001s (28.144 KiB/s) Change-Id: I9004c9aadffa1ae3b0cbf908e6549b5b1f794508 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/403 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-26target: add target async algorithm supportSpencer Oliver
Currently the stm32f1x flash driver uses an asynchronous algorithm as part of the block flash programming. This greatly speeds up flash programming as the target is always running. Moving the async code to the target enable other targets to use this added functionality. Change-Id: I8e53f094c2ef7848a7f86ddb9a35b6edbfc8454a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/402 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-24cfg: beagleboneNeil Jensen
Moved ti_beaglebone.cfg to the board configuration directory. This was originally placed in the wrong location. Signed-off-by: Neil Jensen <neil30al@gmail.com> Change-Id: I05d10b62b1a21618635ee1773c30d77dc756ec82 Reviewed-on: http://openocd.zylin.com/481 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-23cfg: Beaglebone SupportNeil Jensen
Added support for the Beaglebone board based on the am335x processor family. After much trial and error, I was able to configure the Icepick-D and connect to the processor, halt execution, and run a sample program. This is a unified config file (it doesn't use any include statements) and further work needs to be done to split out the icepick-d configuration to be more generic. Change-Id: Ia1b8e9f01f56bd4f8c575ba3d0160c248583a15e Signed-off-by: Neil Jensen <neil30al@gmail.com> Reviewed-on: http://openocd.zylin.com/471 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-23target: add function to get number of bytes available in working areaAndreas Fritiofson
This is a much cleaner solution to the problem of allocating as much working area as possible than what is currently being done in most/all flash drivers (which is: try an arbitrary sized chunk, if it fails, pick a smaller number, rinse and repeat). Use this function to find out how much working area is available, limit or restrict that amount at will and then simply allocate it. Change-Id: Ib7d5d0b7485aed3e0a4fad60c1bedb7dfd16146f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/446 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-23target: rewrite working area allocatorAndreas Fritiofson
The existing allocator couldn't reuse a freed allocation if the sizes didn't match exactly. That led to problems when for example a flash write routine had allocated all of the working area to speed up operation. A subsequent verify pass couldn't allocate space for the checksum algorithm even though all previous allocations had been freed. This allocator is marginally more complex, but solves the above problem by splitting larger free areas to fulfill smaller requests and by merging released areas into adjacent free areas. An initial free area, covering the entire specified address range, is set up on first allocation, and all allocations are split off from (and ultimately merged into) that one. It can also easily be adapted to support several disjoint working areas for the same target, by setting up several initial free areas and slightly modifying the merge code. Change-Id: I6faaf9801312bb19a4fa4474694a0cd1c6e0ab54 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/445 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-22cfg: enable stm32f2x SYSRESETREQ supportSpencer Oliver
The stm32 family supports using SYSRESETREQ as a software reset, lets use it. Change-Id: I171ffa8d888a2d0c28b266051030311521e9bca9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/472 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-02-22stlink: support expected-id 0Spencer Oliver
This brings the stlink driver inline with the rest of OpenOCD. If the user configures the tap as -expected-id 0 then the IDCODE will be treated as a wildcard and ignored. Change-Id: I99160c69b2b40f5b1f608bb59ab6630894502fd8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/476 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-02-22docs: fix more texinfo warningsSpencer Oliver
A period or comma must follow the closing brace of an @xref. Change-Id: Ida5dc3600eca328d95b0a8f6b5c9fe0a0f3ba820 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/475 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-02-22Sometime in the past, nand_fileio_finish started to return ERROR_OK (with ↵Stian Skjelsad
the value of zero) on success. Change-Id: Ifb743c1617e2a6071a87c901fae8165969efcdbf Signed-off-by: Stian Skjelstad <stian@nixia.no> Reviewed-on: http://openocd.zylin.com/468 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-17stlink: add error status checkMathias K
This patch add the status check. Change-Id: I0fdb9bf66dad5ae416c7aa4c6e19116f846571f9 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/463 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-17Fix Typo in cfg fileJonathan Dumaresq
Change-Id: Id91ef70988212185f9ec653cbf5dc4e1defb1b9e Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-on: http://openocd.zylin.com/464 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-16Fix typo that result in recursion.Mathias K
Change-Id: Ie1102b4960bcb5acb254eae69b94fe87ab33dd0b Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/462 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-16stlink: add arm semi-hosting supportSpencer Oliver
Change-Id: Ib275d451a9201580f08ced090e50cf45eb3ab3e2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/459 Tested-by: jenkins
2012-02-16cfg: change default stellaris working areaSpencer Oliver
This sets the default stellaris working area to 2k rather than the current 8k. 2K is the smallest RAM size in the stellaris family. Change-Id: I1407f758eb0926cc094b824a6d25199b313c45de Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/458 Tested-by: jenkins
2012-02-16docs: fix texinfo warningsSpencer Oliver
A period or comma must follow the closing brace of an @xref. Change-Id: I272f1e7fac8f1fee4844f485b0b8e2e4e9cf352d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/456 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-02-16build: fix automake 1.11.2 issuesSpencer Oliver
automake 1.11.2 throws `pkglibdir' is not a legitimate directory for `DATA' if nobase_dist_pkglib_DATA is used. We work around this issue by defining our own location. Change-Id: I3c29e2df0b67e745283c50d358e31699bd60dc74 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/457 Tested-by: jenkins
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2025-01-26 11:05:27 +0000