aboutsummaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2015-08-06kc705: digilent-jtag/kintex7/jtagspi boardRobert Jordens
2015-08-06pipistrello: ftdi-jtag/spartan6/jtagspi boardRobert Jordens
2015-08-06flash/nor/jtagspi: add JTAGSPI driverRobert Jordens
2015-08-06flash/nor/tcl: add read_bank and verify_bankRobert Jordens
2015-08-06cpld/virtex2: allow JSTART to be disabledRobert Jordens
2015-08-06flash/nor/spi: add micron/numonyx n25q128Robert Jordens
2015-08-06target/testee: manage target->stateRobert Jordens
2015-08-06tcl/board: Add EmCraft VF6 SOM and baseboard configsAndreas Färber
2015-08-06tcl/target: Add Freescale Vybrid VF6xx configAndreas Färber
2015-08-06jlink: Add on-board nRF51-DK USB VID and PIDKyle Manna
2015-08-06udev: Add J-Link on-board nRF51-DKKyle Manna
2015-08-06tcl: replace $TARGETNAME with $_TARGETNAMERadek Dostal
2015-08-06RTOS: ThreadX support on ARM926E-JSAlexander Drozdov
2015-08-06target: check memory handlers before use for all typesKarl Palsson
2015-06-30manual: make it compatible with ancient texinfo versions that lack @raggedrightPaul Fertser
2015-05-18Restore normal development cyclePaul Fertser
2015-05-18The openocd-0.9.0 releasev0.9.0Paul Fertser
2015-05-17NEWS: last pre-release changesPaul Fertser
2015-05-17jtag/drivers/stlink: fix SRST issue with stlink-v1Paul Fertser
2015-05-17psoc4: add support for Cypress CCG1 familyVincent Palatin
2015-05-17nrf51: refine and extend known devices tablePeter A. Bigot
2015-05-17docs: gdb_target_description defaults enabledKarl Palsson
2015-05-17server: avoid the tcl server crashing when there is no targetAustin Morton
2015-05-17manual: add missing usb blaster commandsPaul Fertser
2015-05-17manual: fix usb_blaster_pin command syntax and descriptionPaul Fertser
2015-05-17README.Windows: clarify the kernel drivers installationPaul Fertser
2015-05-17manual: reorder flash driver infoPaul Fertser
2015-05-17manual: fix all overfull and underfull hboxesPaul Fertser
2015-05-17manual: remove the lists of config filesPaul Fertser
2015-04-24Restore -dev suffixPaul Fertser
2015-04-24The openocd-0.9.0-rc1 release candidatev0.9.0-rc1Paul Fertser
2015-04-24Add NEWS in preparation for the new releasePaul Fertser
2015-04-24jtag/drivers/ti_icdi: do not segfault when adapter can't be openedPaul Fertser
2015-04-24xmc4500-application-kit-general: Drop srst_nogateAndreas Färber
2015-04-24target/ti_tms570.cfg: added several JTAG IDs for TMS570LS familyJiri Kastner
2015-04-24TI TMS570 USB Kit board configAlex Ray
2015-04-24rtos/mqx: prevent crash with -rtos autoPaul Fertser
2015-04-24target/cortex_a: examination should be done every time it's asked forPaul Fertser
2015-04-24target: try to reexamine even when polling failsPaul Fertser
2015-04-24rtos: fix print format specifiersPaul Fertser
2015-04-16configure the SWD frequency when setting adapter speed in SWD mode for versaloonSimon Qian
2015-04-16flash: at91samd: add SAML21 support, fix part ID issueAndrey Yurovsky
2015-04-16stlink_usb.c: Decode some more errors.Uwe Bonnes
2015-04-16flash/nor/mdr: add docs, remove memory leak on probe()Paul Fertser
2015-04-16flash: efm32: Add support for EZR32LG and EZR32WG.Marc Schink
2015-04-16docs: update OpenOCD url's to openocd.org domainSpencer Oliver
2015-04-16cmsis-dap: print vendor and product id on open failureSpencer Oliver
2015-04-16doc/openocd.texi: fix formatting for mrvlqspi driver documentationMahavir Jain
2015-04-16tcl/target/stm32f3: fix reset init for stlinkPaul Fertser
2015-04-16contrib/itmdump: add a hack to allow direct dumping of specific SWIT, fix tim...Paul Fertser
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 06:27:25 +0000