aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-17tcl: add mrb command to mem_helper.tclMatthias Welwarsky
add "mrb" command to read a byte of memory into a variable Change-Id: I5ddc9fbcc55958a249548627bd15824df6dc0d61 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3542 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-07-17server: support binding to arbitrary interfacesSteven Stallion
Some installations of OpenOCD are used in restricted environments that do not permit binding to public interfaces. This patch does not affect the default behavior to listen on all interfaces, however it does give the option to restrict services by way of the bindto command. Change-Id: Id51bd64b376a8c62dd47b08b4d834872925e6af2 Signed-off-by: Steven Stallion <stallion@squareup.com> Reviewed-on: http://openocd.zylin.com/3534 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-07-04swd: Add support for connect_assert_srst for SWD.Fredrik Hederstierna
Today the reset option for connect_assert_srst is not done for SWD. This patch adds this to SWD and make it possible to connect to targets which might disable JTAG interface when running. Change-Id: Ib89f7cf59b628e8f0b5fca9dd9e362e383c4b99f Signed-off-by: Fredrik Hederstierna <fredrik@hederstierna.com> Reviewed-on: http://openocd.zylin.com/3018 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-06-23cfi: Add support for strangely endianness broken SoC implementationsEsben Haabendal
This adds the 'data_swap' parameter to the CFI driver, which enables swapping of data bytes when writing/programming words to the flash. Note, that this specifically means that bytes are not swapped when writing command words to the flash chip. Unless you are using the SAP in an LS102x chip to program an attached 16-bit NOR flash, you hopefully do not need this! Change-Id: I1e6f7169da36f373c880d1756d9c21c9957acc50 Signed-off-by: Esben Haabendal <esben@haabendal.dk> Reviewed-on: http://openocd.zylin.com/3109 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-06-23Support for Freescale LS102x SAPEsben Haabendal
The SAP in LS102x SoC's from Freescale is able to read and write to all physical memory locations, independently of CPU cores and DAP. This implementation is 100% based on reverse-engineering of JTAG communication with an LS1021A SAP using a JTAG debugger with SAP support. And as such, this code is for now "works-for-me", pending verification by other OpenOCD users, or even better, actual information from Freescale on the SAP interface. Change-Id: Ibb30945e017894da5c402f9f633fc513bed4e68c Signed-off-by: Esben Haabendal <esben@haabendal.dk> Reviewed-on: http://openocd.zylin.com/3096 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-05-31stm32f7x.cfg: Fix expected JTAG id.Uwe Bonnes
Change-Id: Icd21b9ac5f50094262f30db431d8a775a0d263ca Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3512 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-24Make #include guard naming consistentMarc Schink
Change-Id: Ie13e8af0bb74ed290f811dcad64ad06c9d8cb4fa Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/2956 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-24Remove FSF address from GPL noticesMarc Schink
Also make GPL notices consistent according to: https://www.gnu.org/licenses/gpl-howto.html Change-Id: I84c9df40a774958a7ed91460c5d931cfab9f45ba Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3488 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-22armv4_5: Integrate build of checksum codeAndreas Färber
Add rules to build armv4_5_crc.inc, and convert the code to target endianness the least intrusive way. Change-Id: I7452b2c7e679dae14f9cda5f89bc81c16fc12cad Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3473 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2016-05-22armv4_5: Integrate build of erase check codeAndreas Färber
Add rules to build armv4_5_erase_check.inc, and convert the code to target endianness the least intrusive way. Drop an unused word from the assembler sources to make the ARM bytecode fully match that of armv4_5.c and to not break ARMv4 assumptions. This completes the build rules for contrib/loaders/erase_check directory. Change-Id: I36be7a944e26142088195fa3fb072d4e577bf328 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3135 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-22armv7m: Integrate build of checksum codeAndreas Färber
Add rules to build armv7m_crc.inc and include it via preprocessor. Change-Id: I4482c7acb8454de28bdf210d9f06c0720ada490a Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3474 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-22armv4_5: Improve arm_checksum_memory() error handlingAndreas Färber
Clean up the working area in case writing fails. Change the error handling paradigm to avoid duplication. Change-Id: Ie3f95f992a98a1325428e4032a1c17346d4c9977 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3472 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-22armv4_5: Improve arm_blank_check_memory() error handlingAndreas Färber
Clean up the working area in case writing fails. Change the error handling paradigm to avoid duplication. Change-Id: I95bb12fbe7c80b594e178468bcd4f6387c682c93 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3471 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-22tcl/target: Add PSoC 5LP configAndreas Färber
Tested with CY8CKIT-059 and soldered-on J5 connector. Change-Id: I687786179f2df354321a18d26330c60908461e0b Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3410 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-22Fix comment that limits num_bits to 32.Tim Newsome
Andreas Fritiofson says "If any adapter driver does not work with arbitrary lengths of individual fields, it's a bug." https://sourceforge.net/p/openocd/mailman/message/35091945/ Note also that lengths of at least 96 bits are already in use, eg. in mips_ejtag_add_scan_96(). Change-Id: I62a150adc75c0ef78827683ca8d0a8e90310a982 Signed-off-by: Tim Newsome <tim@sifive.com> Reviewed-on: http://openocd.zylin.com/3491 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-21xmc4500: Disable SRST for SDRAM App KitAndreas Färber
Just like observed with the General App Kit earlier, it now started to fail halting: SWD IDCODE 0x2ba01477 TARGET: xmc4500.cpu - Not halted in procedure 'reset' in procedure 'ocd_bouncer' SWD IDCODE 0x2ba01477 Halt timed out, wake up GDB. Rely on the target's default sysresetreq behavior to allow flashing to work seemlessly again. Change-Id: Ib9ce5f2c0ab99dca6d0fc74435fe26a58437fae5 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3416 Tested-by: jenkins Reviewed-by: Jeff Ciesielski <jeffciesielski@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-21configure.ac: support MSYS with newer config.guessPaul Fertser
Upstream commit http://git.savannah.gnu.org/gitweb/?p=config.git;a=commitdiff;h=f4ebd3ed097771a729b68e688236aea665e7c1f3 makes both i386 and amd64 MSYS (and MSYS2) systems be detected as *-pc-msys . With this patch OpenOCD builds without any additional tweaks on MSYS2 with the latest config.guess. Change-Id: I1ae4154f76125a84078926b425fa989904639ce0 Reported-by: "Stevens, Kelly E. M." <Kelly.Stevens@gtri.gatech.edu> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3468 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-20lpcspifi: Fix SWD support for LPC43xxAndreas Färber
When using SWD rather than JTAG transport, the lpcspifi driver complains: Error: Device ID 0x0 is not known as SPIFI capable Error: auto_probe failed This is because target's JTAG tap->idcode is zero for SWD. Drop this check completely and hardcode the addresses for now. Neither the JTAG TAPID nor the SWD IDCODE are unique enough to detect the exact chip model and thereby its memory map. Change-Id: Ic230e3e989a3e1f1a5b3bae68bdb34e5ef55d392 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3089 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-20tcl/target: Add config for TI MSP432P4xxAndreas Färber
Tested with TI MSP-EXP432P401R LaunchPad, via both on-board XDS110-ET (swd) and external J-Link (jtag). Change-Id: Ic0caa8516a155754b1c88a04acc8d3c511d9a5f7 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3485 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-20board/efm32: Disable SRSTMarc Schink
The current configuration leads to the following error when trying to program the target: SWD IDCODE 0x2ba01477 timed out while waiting for target halted TARGET: efm32.cpu - Not halted in procedure 'program' in procedure 'reset' called at file "embedded:startup.tcl", line 478 in procedure 'ocd_bouncer' Use the default reset handling of the target (SYSRESETREQ) to reset the system rather than SRST to fix the problem. Tested on EFM32GG, EFM32TG and EZR32WG STK. Change-Id: I788c41baf08b20814cbe0934b563424c4bc144b8 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3420 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-20Fix spelling of ARM CortexAndreas Färber
It's Cortex-Xn, not Cortex Xn or cortex xn or cortex-xn or CORTEX-Xn or CortexXn. Further it's Cortex-M0+, not M0plus. Cf. http://www.arm.com/products/processors/index.php Consistently write it the official way, so that it stops propagating. Originally spotted in the documentation, it mainly affects code comments but also Atmel SAM3/SAM4/SAMV, NiietCM4 and SiM3x flash driver output. Found via: git grep -i "Cortex " git grep -i "Cortex-" | grep -v "Cortex-" | grep -v ".cpu" git grep -i "CortexM" Change-Id: Ic7b6ca85253e027f6f0f751c628d1a2a391fe914 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3483 Tested-by: jenkins Reviewed-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-20nand: change use_raw to booleanIvo Manca
Change type of use_raw to boolean. This parameter was already assigned a boolean variable (in COMMAND_PARSE_ENABLE) and used as a boolean. Change-Id: I22f8308246cb25ec9ec2395599e406160410a2a8 Signed-off-by: Ivo Manca <pinkel@gmail.com> Reviewed-on: http://openocd.zylin.com/3496 Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-20nand: fix return valueIvo Manca
Return ERROR_NAND_DEVICE_NOT_PROBED to prevent calling functions from segfaulting when nand device has not yet been probed (ie nand verify) Change-Id: Ibc4da0aad00e6cc6c83008882b054d981453dc36 Signed-off-by: Ivo Manca <pinkel@gmail.com> Reviewed-on: http://openocd.zylin.com/3495 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-20tcl: add STM32F429I-DISC1 board configSamuel Martin
Both the STM32F429I-DISC{O,1} boards are equipped with the same MCU, but differ by the debugging chip: - the STM32F429I-DISCO uses the ST-LINK/V2 chip; - the STM32F429I-DISC1 uses the ST-LINK/V2-B chip (which matches the USB VID/PID set in stlink-v2-1.cfg). Change-Id: I07d637f72d26cf5d714472638da974eb6ca02325 Signed-off-by: Samuel Martin <s.martin49@gmail.com> Reviewed-on: http://openocd.zylin.com/3492 Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-20cortex_a: Rename APB-AP to CPU in memory contextsAndreas Fritiofson
Memory accesses are not made through the APB-AP, they are made through the CPU (which happens to be controlled over the APB-AP). Rename all irrelevant uses of the APB-AP term. And fix the long standing typo in the function names... Change-Id: Ide466fb2728930968bdba698f0dd9012cc9dbdf9 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3216 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-20stm32l1/Cat.3: Devices have only one bank.Uwe Bonnes
Change-Id: I02ce243c228ea20be6d5f01fee705a671747ebad Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3490 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-20stm32l4x.cfg: Fix RCC_CR address.Uwe Bonnes
Change-Id: I7a63d24a495e28bc01b5e6603f15b88e075878b8 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3489 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-17kinetis: Fix typo in variable namesAndreas Färber
It's security, not securtiy. Change-Id: Idb10d7e0a1ca47d2d93b496d12cd4ec7ad116f22 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3487 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-17arm_adi_v5: Add part number for TI MSP432P401RAndreas Färber
According to the MSP432P4xx Family TRM (SLAU356A) Figure 4-7, 0x9AF is the part number for MSP432P401xx devices. Verified on TI MSP-EXP432P401R LaunchPad. Change-Id: I22b57c42f2a0dc8263fab6b480cf8c169c7dc295 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3486 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-17arm_adi_v5: Add part numbers for Infineon XMC4000 familyAndreas Färber
This was found on multiple XMC4500: Valid ROM table present Component base address 0xe00ff000 Peripheral ID 0x00001c11db Designer is 0x0c1, Infineon (Siemens) Part is 0x1db, Unrecognized Component class is 0x1, ROM table MEMTYPE system memory present on bus On multiple XMC4700 and an XMC4800 this was found instead: Valid ROM table present Component base address 0xe00ff000 Peripheral ID 0x00001c11df Designer is 0x0c1, Infineon (Siemens) Part is 0x1df, Unrecognized Component class is 0x1, ROM table MEMTYPE system memory present on bus Name them "XMC4500 ROM" and "XMC4700/4800 ROM" respectively. Change-Id: If369a6d16524004ba439b878f090a313a9f3a760 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3482 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-17arm_adi_v5: Add part number for Infineon XMC1000 familyAndreas Färber
Not documented in the Reference Manuals but found on multiple XMC1100/1202: Valid ROM table present Component base address 0xf0000000 Peripheral ID 0x00001c11ed Designer is 0x0c1, Infineon (Siemens) Part is 0x1ed, Unrecognized Component class is 0x1, ROM table MEMTYPE system memory present on bus Name it "XMC1000 ROM", since it didn't differ between XMC1100 and XMC1200. Change-Id: I98a5a524c0d0836f395400fbac24fd496b2ec141 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3481 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-17jtag ulink: dont compile function when not requiredAlexander Kurz
ulink_calculate_frequency() is used exclusively when _DEBUG_JTAG_IO_ is set, no need to compile this function if it is not used. Declaring it static in the same commit. Change-Id: I243ffdf69a1dc3bee6d16e4bb8d78396b6ea5144 Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3241 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-17udev: add rule for original Keil ULink (version 1)Alexander Kurz
The original ULINK adapter has been introduced by Keil in 2002 and got replaced in 2008 by the incompatible ULINK2. It is not listed on their website any more. For information about it, browse archive.org for http://www.keil.com/ulink1/ or http://www.keil.com/ulink/ Change-Id: Ie52d381580acab53ddb40499594dbdc2d27ef1b6 Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3371 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-17arm_adi_v5: Adjust part number column alignmentAndreas Färber
Consistently increase the space-indentation of the .full values to nicely align with the new "Qualcomm QDSS Component v1" .type value. Change-Id: Icd28d8f3fc7c3afcccb9dcfe138ac57d64927d1a Suggested-by: Freddie Chopin <freddie.chopin@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3480 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2016-05-17arm_adi_v5: Update DP (Debug Port) registers defined in ADIv5.2.Andreas Fritiofson
Note: WCR (Wire Control Register) is replaced by DLCR (Data Link Control Register). And only TURNROUND field is modifiable. [andreas.fritiofson@gmail.com]: Rename DP_IDCODE to DP_DPIDR as well. Sort list by address and align it using spaces instead of tabs. Add comments about supporting DP versions. Remove non-functional wcr command completely. Change-Id: Ic6b781b07c8eead8b0237d497846d0da060cb1ba Signed-off-by: Alamy Liu <alamy.liu@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3244 Tested-by: jenkins
2016-05-16doc: Fix mismerges of fm4, kinetis and kinetis_ke flash driversAndreas Färber
Commit dfc6658cf98d494e066426945879b9f60bbf9678 ("Kinetis: flash driver described in openocd.texi") inserted a kinetis section between fm3 and lpc2000. Then commit 43ff5acd45017fd9828cc56f54b929e600956c3b ("flash: New Spansion FM4 flash driver") was merged, inserting the fm4 section between kinetis and lpc2000, instead of after fm3. Finally kinetis_ke was added between kinetis and fm4 in commit 5396ec5dcc64354c8101f8d3f16d498ca3b10326 ("flash: Added support for Freescale Kinetis KE family."). Restore the alphabetical order by moving the fm4 section to before kinetis. Change-Id: I77e47c3cd5b2cd8570b62ff2f7be8526aaf57ad0 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3484 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Marc Schink <openocd-dev@marcschink.de>
2016-05-14arm_adi_v5: Reorder Atmel part number entryAndreas Färber
Instead of placing Atmel last, after ANY_ID, place it after ARM (it's arm_adi_v5 despite 0x4BB) and sort it with the other vendors, i.e. before ADI and Qualcomm. Adapt column alignment. Drop the redundant "Atmel" comment to clarify that Analog is not Atmel. Change-Id: Ic06785db079cf58d49815a639236636c180e5e17 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3479 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-14arm_adi_v5: added partnumber for APQ8016Jiri Kastner
On APQ8016 was found a CoreSight component designed by Qualcomm, according to db410c HRM [1] it has a partnumber following this schema: [11:8] is 0x4 meaning Qualcomm designed Coresight component in QDSS. Reads as 0x4. [7:6] is Subsystem/core family ID (e.g. denote QDSS family or generation). [5:4] is Subsystem/core configuration options (e.g. denote cache options, etc.). [3:2] is Subsystem/core fuse options. [1:0] is Subsystem/core future use field Reads as 0x440. [1] - https://developer.qualcomm.com/download/sd410/hardware-register-description-qualcomm-snapdragon-410.pdf Change-Id: I9b4b41fd17c59d2f5ae35b53278d06d6087665f8 Signed-off-by: Jiri Kastner <cz172638@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3408 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-14arm_adi_v5: added partnumbersJiri Kastner
On hi6220 'dap info' returned some unknown components from ARM. Collected from ARM docs, mostly ROM table entries. Typo fix for Cortex-M3 FPB. Change-Id: I96bbf7349061937b3afc8bb8d6d1650f2609f82d Signed-off-by: Jiri Kastner <cz172638@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3407 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-14flash/nor: Add Ambiq Micro Apollo flash driver.Rick Foos
Initial release of Ambiq Micro Apollo flash driver supporting our sub-threshold (low power) Cortex M4F part, and Evaluation Kit. We have been shipping openocd to our customers for about one year. The EVK boards are SWD only using ftdi. We also use two of the other COM instances to display debug information. It takes about 15 seconds to flash 512K, and mass erase is about 5 seconds. Tested by internal verification group, FAE's, and customer sites. Merged commit 'refs/changes/17/3417/1' as suggested. Makefile.am and drivers.c follow the new format to avoid conflicts. Removed unused fault_capture command. Added documentation for flash driver. Change-Id: Iae92d869369c6827244f0071f9cb522d8d91fed8 Signed-off-by: Rick Foos <rfoos@solengtech.com> Reviewed-on: http://openocd.zylin.com/3230 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-14arm_adi_v5: Add a few dap component ids, covers the atmel at91sam.James Mastros
Change-Id: I62473fdf3dbc30cb0e1443c3d3f37918f1d61b89 Signed-off-by: James Mastros <james@mastros.biz> Signed-off-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/3383 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-14xmc4xxx: Improve xmc4xxx_blank_check_memory() error handlingAndreas Färber
Clean up working area in case writing fails. Probably inherited from armv7m_blank_check_memory(). Fix adapted from armv7m_checksum_memory(). Change-Id: I784bef481d1eba833ab6a9c34249fe9d43a16081 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3470 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-14armv7m: Improve armv7m_blank_check_memory() error handlingAndreas Färber
Clean up the working area in case writing fails. Adapted from armv7m_checksum_memory(). Change-Id: I4e5950f568ed70a72a1dcfd77e3321110b17e1de Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3469 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-14arm7: add missing braces around an if()Aleksander Morgado
Spotted by gcc: arm7_9_common.c: In function ‘arm7_9_unset_breakpoint’: arm7_9_common.c:353:4: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation] if (current_instr == arm7_9->thumb_bkpt) ^~ arm7_9_common.c:356:5: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’ if (retval != ERROR_OK) ^~ The logic won't change once the braces have been added, as the new 'retval' check only makes sense within the if(). Change-Id: I6a303e118f2150e5eb25c9268ad06de5d8a533b2 Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Reviewed-on: http://openocd.zylin.com/3477 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-14libjaylink: Update to latest master branchMarc Schink
Among other things, this fixes building on Cygwin and MSYS. Change-Id: I8bdceb49dc72b5f666388cfd97876eba8e1d2b13 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3478 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-05-08Helper ioutil: cleanup: removing dead codeAlexander Kurz
The ioutil helper functions copyfile and copydir were last and only used in ecosboard.c which has been removed with commit 39650e22. Removing the dead code. Change-Id: I36c7c4c5009d755b4513a14a9f9e214d1ee500e8 Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3240 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-08flash/nor/spi: use only lower case hex numbersRobert Jordens
Change-Id: I21ad0d3a73a60d22cb98a0350098baf8af96bebf Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/3350 Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-08flash/nor/spi: fix macronix 25l1005 chip eraseRobert Jordens
Change-Id: Ibc445bbe9360d0f1f41e71af8b990b96e0ae5d1f Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/3349 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-08cortex_a: fix cortex_a_assert_reset() if srst_gates_jtagMatthias Welwarsky
The cortex_a specific assert_reset function must only apply nSRST if the reset configuration states that JTAG can be used while nSRST is asserted. Change-Id: If604a65fdea5bcb46ec723ada547a4e8d6fa8c59 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3356 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-08stlink: Decode more errors.Uwe Bonnes
For STLINK_SWD_AP_FAULT git://git.ac6.fr/openocd commit 657e3e885b9ee10 returns ERROR_OK with the comment: Change in error status when reading outside RAM. This fix allows CDT plugin to visualize memory. Change-Id: Id8e220961b748ef9467fd84de62b1dc84ace63f8 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3373 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 00:35:26 +0000