aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-01-15jtag: Avoid extra SRSTn resets when connectingEvan Hunter
Previously the jtag_add_reset(1, 0) caused the processor to be released, and if SRSTn existed then it would then be reset again two lines later. Change-Id: I58b7a12607f46f83caa7ed3b3cebc4195eb51ef6 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/2398 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15docs: update bug tracker URLSpencer Oliver
Change-Id: I6a362020a29ccb9222f7909b5b34e5c35a02ed4b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2454 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-01-15lpc2000: Improve lpc2000 flash driver.Nemui Trinomius
This patch adds flash programming support for LPC5410x and LPC82x. And adds auto flash size detection for LPC800 series. Tested on below listed boards/chips. LPC54102(LPCLPC54102Xpresso) LPC824(LPCXpresso824-MAX) LPC812(LPC812MAX) LPC811,LPC810 Change-Id: Ie68b6d425b17ccfa83814607ee61056e99800c1c Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2442 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-01-10cortex_a: Add support for A7 MPCoreAlexander Stein
A7 MPCore needs unlocking the debug registers same as with A15 MPCore. Found out by hacking on the code. Change-Id: I613cb4fb35007b85b4a9a401577b47768bc1a08b Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Reviewed-on: http://openocd.zylin.com/2344 Tested-by: jenkins Reviewed-by: Kamal Dasu <kamal.dasu@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-10cortex_a: Add support for A15 MPCoreKamal Dasu
Added Cortex-A15 support for DAP AHB-AP init code as per ADI V5 spec. Also added changes to make the APB MEM-AP to work with A15. Made the the cortex_a target code generic to work with A8, A9 and A15 single core or multicore implementation. Added armv7a code for os_border calculation to work for known A8, A9 and A15 platforms based on the ARM DDI 0344H, ARM DDI 0407F, ARM DDI 0406C ARMV7A architecture docs. Change-Id: Ib2803ab62588bf40f1ae4b9192b619af31525a1a Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-on: http://openocd.zylin.com/1601 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-09ChibiOS: struct ChibiOS_params_list[] should not be constTomas Vanek
Procedure ChibiOS_update_memory_signature() sets struct member signature. Change-Id: I45adbd14fa7cda99413fd0b516d45b3fb55e322d Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2427 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-09transport: clarify error message when transport is not selectedKarl Palsson
When no transport is selected, the error message dumps the available transports, but not how to actually select one. Change-Id: I63da2a4b59e3f6cc8d30bd631e41a82636a056ef Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2406 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-09flash: fix kinetis driver typosSpencer Oliver
Change-Id: I0a4557f08507c61cb8ab33b38d2b6b069c344c09 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2385 Tested-by: jenkins
2015-01-09cfg: fix lpc17xx regressionSpencer Oliver
commit b5a6ba46 broke the following board files, update to new cfg. Change-Id: Ic3b776bd32eb72eae6ad1e130e329268ce9ba71a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2384 Tested-by: jenkins
2015-01-09avoid segfaulting when attempting to set an unavailable type of breackpointSalvador Arroyo
For example "bp 0x20000000 8 2" makes openocd segfaulting on a stm32f4x Discovery board. Change-Id: I1ddd46b1fa9ade78db2234ed975ccefb72539331 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/2342 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-09Mac/PPC: Fix build.Jens Bauer
GCC-4.2 on Mac/PPC complains about size_t is expected for %zx and the build stops. In order to avoid other problems, I've chosen simply to typecast. Change-Id: I99b569c4d1100e729712e31d24d6539f8b5971b6 Signed-off-by: Jens Bauer <jens@gpio.dk> Reviewed-on: http://openocd.zylin.com/2360 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-01-09swd: handle various failure conditionsPaul Fertser
When communication with target fails for whatever reason, it makes sense to do JTAG-to-SWD (in case the target got power-cycled or the DAP method was reset anyhow), SWD line reset sequence (part of JTAG-to-SWD already) and the mandatory IDCODE read. Schedule that to be performed on the next poll. Fix the return values for ftdi and jlink drivers to be consistent with OpenOCD error codes and remove ad-hoc calls to perform DAP method switching (as it's now done from the upper layer automatically). Change-Id: Ie18797d4ce7ac43d8249f8f81f1064a2424e02be Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2371 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mateusz Manowiecki <segmentation@fault.pl>
2015-01-09target: improve robustness of polling and reexaminationPaul Fertser
When a target was present on OpenOCD start but later disappeared for whatever reason (typically unstable connection or target going to sleep) and reappeared only for a brief period of time, reexamination would fail, and poll would no longer run. This patch fixes it. Change-Id: I61f9b5a3f366a761320e233f4e1689f926b5556d Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2370 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2015-01-09rtos: free gdb packet allocated memorySpencer Oliver
compile tested only. Change-Id: I3bc06c212967a3ce44a875f802b554c178537d1d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2382 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-08checkpatch: fix check for the FSF addressPaul Fertser
Commit 4525c0a4c4d0aaa199c37a6d2245617e8445f213 cherry-picked check for the FSF address presence from upstream. However, it has a typo resulting in this obscure error when triggered: Use of uninitialized value in concatenation (.) or string at /home/jenkins/.jenkins/jobs/openocd-gerrit/workspace/tools/scripts/checkpatch.pl line 1258. ERROR: This patch fixes it. Change-Id: Ia417ef4782d21c8b3f1d39de88c4ab850a5a6630 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2414 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-07jtag: Remove unnecessary global variableAndreas Fritiofson
Change-Id: I96e5f13b12da2970eafc5fca24b7952d427eeca9 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2235 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-07jtag: Fix memory leaks in jtag_tap_free()Andreas Fritiofson
Change-Id: I953fbb346fbf168fb50b349d245f2aa64dbfdcb3 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2234 Tested-by: jenkins
2014-12-03stm32l: split l0/l1 support no jtag, different HSI settingsKarl Palsson
L0 is cortex m0+, so different id codes, SWD only, different addresses for the clock speedup. It has no endian options, no boundary scan. Removed all L0 specific portions from L1 files, and renamed files to clarify their purpose. The deprecated stm32lx_stlink.cfg is kept as is, as it is only around for backwards compatibility with prior releases. Tested on STM32L053 Discovery and STM32L151 Discovery. Has _not_ been tested with jtag on L1. Change-Id: I8eea890d2f92a302d9e9c8a8832d218ee1b6bcfc Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2405 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Juha Niskanen <juha.niskanen@haltian.com>
2014-12-03stm32: Fix L0/1xx CPUTAPID setting and add new L1xx BSTAPIDsJuha Niskanen
Fix script parse error, when using JTAG, introduced in commit 0187ced9ed2 Add several BS TAPIDs with comments about ST documentation. Change-Id: I8d0370b244ccaf7ea0dbe1919bfad1915f7317d4 Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com> Reviewed-on: http://openocd.zylin.com/2376 Tested-by: jenkins Reviewed-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24tcl/target/stm32f4: ramp up JTAG speed, HSI is 16MHz thereUwe Bonnes
Since all F4 parts have an internal HSI providing 16MHz, it's safe to use 2MHz JTAG frequency by default. Change-Id: I2702d5a1d642d4acd4af2db54c028949132c6900 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2383 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24tcl/target/stm32f4x: add F401 and F411 IDsUwe Bonnes
Change-Id: I12079586dafb8a7614bdf4cc0b13cd5030301742 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2379 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24lpc2000: ignore status of part ID IAP commandGrigori Goronzy
The IAP firmware won't return a proper status with some versions. This happens on my CCC r0ket board and others have seen it as well [1]. So just ignore the status code and do a (weak) consistency check instead. [1] http://www.lpcware.com/content/forum/lpc1343-iap-read-part-identification-command Change-Id: I0daa779d520a540629677c56857bbc20d6db422d Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Reviewed-on: http://openocd.zylin.com/2364 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-11-24checkpatch.pl: check for the FSF mailing addressAntony Pavlov
This check code is imported from Linux v3.17 checkpatch.pl. Change-Id: If39d834ee9b6131bccc92de38fd7c108650bd2f1 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/2341 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24or1k: remove address of the Free Software FoundationAntony Pavlov
The FSF address has changed; The FSF site says that address is Free Software Foundation 51 Franklin Street, Fifth Floor Boston, MA 02110-1301 USA (see http://www.fsf.org/about/contact/) Instead of updating it each time the address changes, just drop it completely treewide. Change-Id: I27199f7625901f677d8105d1e8876cff00147b71 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/2340 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24checkpatch.pl: check for openocd tree, not for kernel treeAntony Pavlov
checkpatch.pl looks for linux kernel specific paths and files to check source tree. As openocd misses kernel files it ends with this error message: Must be run from the top-level dir. of a kernel tree This patch also renames 'kernel' -> 'openocd' in source tree-related messages. Due to checkpatch checking modifications on itself, lift the restriction on having no spaces at the start of a line for Perl scripts. This can be readded back later. Change-Id: I89b7ca976bef5e13785bd3a43e597c9feb4c2df4 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/2339 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24mips32: fix typosAntony Pavlov
Change-Id: Ibb98fe3da68bf670a5bb83600bb49647db8a4163 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/2338 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24doc: flash: write_image writes only loadable sectionsAlexei Colin
The code that takes only sections marked PT_LOAD is in image_elf_read_headers in src/target/image.c (Just trying to save some time for the next person with same question.) Change-Id: I493c102c908fca2b7238276ddbbecbe8c7cd9a0a Signed-off-by: Alexei Colin <ac@alexeicolin.com> Reviewed-on: http://openocd.zylin.com/2348 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24Added FPU support for ChibiOS/RTChristian Gudrian
When an enabled FPU is detected we now use an appropriate stacking. Change-Id: I1b0f43ec22e1c55c4f10e2ffa97d4aaa77bca5ee Signed-off-by: Christian Gudrian <christian.gudrian@gmx.de> Reviewed-on: http://openocd.zylin.com/2354 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24rtos: add support for ChibiOS/RT 3.0Christian Gudrian
In ChibiOS/RT 3.0 the ready list pointer "rlist" is now part of the system data structure. Since the ready list is the first element in that structure it can be accessed via the structure's symbol "ch". Change-Id: Idc7eaa87cb7bbad0afa0ff1dafd54283bf429766 Signed-off-by: Christian Gudrian <christian.gudrian@gmx.de> Reviewed-on: http://openocd.zylin.com/2352 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24rtos: allow symbols to be optional for a particular RTOSPaul Fertser
Default to non-optional. Change-Id: Ifc9ddb1ab701a19c3760f95da47da6f7d412ff2e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2355 Tested-by: jenkins Reviewed-by: Christian Gudrian <christian.gudrian@gmx.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24flash: at91samd: fix use of is_erased in checkAndrey Yurovsky
is_erased can be one of -1, 0, or 1 so it must not be checked like a boolean value. In this case we want to erase a page unless we know it's already erased so we just check for is_erased != 1. Thanks to Jim Paris for pointing this out on another driver. Change-Id: I4591186228153b64e5a9608a2aac18745e578d4a Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/2368 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24jtag/drivers/jlink: implement register command to fix SWDPaul Fertser
Some J-Link fw versions require registration to be performed before SWD operation is possible. It doesn't harm anyway, vendor's utilities do it unconditionally. Thanks go to Segger for providing the necessary information. Change-Id: Iabd76c743eca86e2c817a97cb93c969fec3f7ac6 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2331 Tested-by: jenkins
2014-11-24at91sam4: Adding support for the AT91SAM4S4A.Thomas Schmid
Added the chip definition for the Atmel AT91SAM4S4A. This chip is a 48-pin package with 256k flash and 64k ram. Change-Id: I8ada7d5735e31e0ce086f96f5906c7358464245c Signed-off-by: Thomas Schmid <thomas@rfranging.com> Reviewed-on: http://openocd.zylin.com/2254 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24flash/nor/lpcspifi.c: fix bug that prevented clean reset after flash writeAnders
After SPI flash was written by the assembly language stub, the last SPI command was not terminated by raising CS. This left the SPI device in a hung state that prevented the flash from being read by the M4 SPIFI controller, even after the M4 was fully reset. To access the flash via SPIFI, it was necessary to completely power cycle the board. This fix adds the missing instructions to raise CS and terminate the SPI command after the last byte. This allows the M4 to be resumed or reset cleanly after flashing. The SPIFI memory is now immediately accessable at address 0x1400 0000 after flashing is complete. Change-Id: I4d5e03bded0fa00c430c2991f182dc18611d5f48 Signed-off-by: Anders <anders@openpuma.org> Reviewed-on: http://openocd.zylin.com/2359 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24Hacking: Some note how to review.Uwe Bonnes
Change-Id: Ied682884abdba27da265f1ce3632417f54a80fe2 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2380 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24lpc2000: Added LPC1500 series flash programming support.Nemui Trinomius
This patch adds flash programming support for LPC1547/8/9 and LPC1517/8/9. Tested on LPC1549(LPC1549 LPCXpresso Board with CMSIS-DAP firmware). Change-Id: Ic95b4d62055bb9fdc2ca484696a38ccaf49ad951 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2304 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Grigori G <greg@chown.ath.cx>
2014-11-24nrf51: fix checks for is_erasedJim Paris
is_erased can take the value 0 (no), 1 (yes), or -1 (unknown). Checks like (!is_erased) don't do the right thing if it's -1. Change-Id: I10ba32c99494ca803e0a7a1ba56fdd78184b96bb Signed-off-by: Jim Paris <jim@jtan.com> Reviewed-on: http://openocd.zylin.com/2366 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24nrf51: verify that UICR needs erasing before triggering an error about itJim Paris
If the UICR is already empty, there's no reason to return an error just because it can't be erased again. This happens, for example, when flashing UICR from GDB after a "monitor nrf51 mass_erase". Change-Id: Ia6d28c43189205fb5a7120b1c7312e45eb32edb7 Signed-off-by: Jim Paris <jim@jtan.com> Reviewed-on: http://openocd.zylin.com/2363 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24nrf51: fix UICR eraseJim Paris
nrf51_erase_page() checks for (sector->offset == NRF51_UICR_BASE) to determine if the UICR should be erased. However, sector->offset for the UICR bank is set to 0 in nrf51_probe, so this code is never hit. Attempting to erase UICR ends up erasing the first flash sector. Use bank->base instead to determine if UICR is being erased. Change-Id: Ie5df0f9732f23662085ae2b713d64968cd801472 Signed-off-by: Jim Paris <jim@jtan.com> Reviewed-on: http://openocd.zylin.com/2362 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24nrf51: fix UICR region sizeJim Paris
The UICR region is actually 0x100 bytes in size. Besides making the full region accessible, having the right value is important because GDB rounds flash addresses to the nearest multiple of the block size when determing which flash blocks to erase. Change-Id: I416c391cbfc7be41a03a9b9c6e42326c87391f38 Signed-off-by: Jim Paris <jim@jtan.com> Reviewed-on: http://openocd.zylin.com/2361 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2014-11-03arm_adi_v5: added two CoreSight peripheral IDsPeter Lawrence
added "Single Wire Output" and "Trace Memory Controller" peripheral IDs to dap_rom_display(), which is invoked by the "dap info" command Change-Id: Iea3201007bb98e6376fbb50be40a4a2e031b0a03 Signed-off-by: Peter Lawrence <majbthrd@gmail.com> Reviewed-on: http://openocd.zylin.com/2369 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-11-02tcl/interface/ftdi/swd-resistor-hack: clarify and add schematic diagramPaul Fertser
Change-Id: I8600ee983de85e4225430ae508a50cd938122d89 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2357 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-10-16cmsis-dap: add serial number supportSpencer Oliver
Change-Id: I66926d1013e2b3a43ce0d18d3599771428706b6a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2329 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-10-16cmsis-dap: refactor HID PID/VID check loopSpencer Oliver
In preparation for adding serial number support. Change-Id: I3c9fb411b79d54a4d2de067039255436ba6708c7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2328 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-10-16build: make makeinfo optionalSpencer Oliver
This means the user does not have to install texinfo to build OpenOCD. Change-Id: Id9f42da798d3c2b79e95214c9e2559cf32802251 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2325 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-10-06cfg: remove incorrect execute permissionsSpencer Oliver
Change-Id: I0ba9dfdf876bc99df4e2d1f1f3bc0c9ccc6c98c2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2333
2014-10-06stm32: add mass erase support for STM32LRémi PRUD'HOMME
The mass erase for STM32L was lack because the procedure is more complex than the procedure for the STM32F4xx. The reference manual RM0038 (L100 subfamily) page 79 is more accurate than the reference manual for the STM32L0xx. On the L0, the mass-erase erase also the EEPROM. This is a limit to mass erase on L0. The mass erase procedure is a command of telnet interface. Tested on Discovery L053 and Discovery L100. Change-Id: I6a1d7a3669789aea89c59a006ab2d883f3d827ca Signed-off-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-on: http://openocd.zylin.com/2319 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-06stm32: Add config file for a new board STM32L052 dsicoveryRémi PRUD'HOMME
this board use STLink-V2-1, the STM32L1xx use the STLink-V2. Change-Id: Ie58f45affcb1e9a6fed711b48c3c03b5035ab2b2 Signed-off-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-on: http://openocd.zylin.com/2317 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-06stm32: add L0xx CPUTAPIDRémi PRUD'HOMME
Add CPUTAPID for stm32 L0xx mcu devices. Using -expected-id to add the new id with the id for L1xx devices. This for reduce the duplicated code. Change-Id: I48bd230884ecf38fa200c620b547bdf3b5f59132 Signed-off-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-on: http://openocd.zylin.com/2315 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-06flash/nor/stellaris: implement protection statuses and proceduresPaul Fertser
This should make protection work as expected on all stellaris families, including the latest Tiva C Snowflake. Run-time tested on TM4C123x (Blizzard). Change-Id: Ia017edb119bec32382b08fc037b5bbc02dd9000c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2267 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-22 03:13:17 +0000