aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-20jtag/drivers: add USB-Blaster IIFranck Jullien
This patchs adds a new access driver for the existing USB-Blaster interface driver. This interface (as it is build-in on the sockit development board) is composed of a Cypress EZ-USB plus a CPLD. The Cypress chip as an embedded 8051 microcontroller. When it's powered up, the firmware is downloaded to the chip then the device is disconnected and reconnected with the new firmware. The USB-Blaster II protocol is almost identicial to the old one. The only difference is that you need to send a 0x5F before read TDO back. This command seems to copy TDO buffer datas to the endpoint buffer. Driver will be auto enabled if libusb-1.0 is detected. Change-Id: I562a720a68cb4dcabeab791947d5d38776cb70fa Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1791 Tested-by: jenkins Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-20cfg: add Freescale FRDM-KL46Z BoardSpencer Oliver
Change-Id: Ib585728f13a380eeeb2ada095f3e1a1c2aaf44cb Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1866 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-01-19target: fix typosSpencer Oliver
Change-Id: Icdb517224e8bcf41a16498088e09955048077d35 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1864 Tested-by: jenkins Reviewed-by: Bill Traynor <btraynor@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-01-19cortexm: use Cortex-M rather than cortex-m3 for dwt registersSpencer Oliver
Change-Id: I28e3a8c65ccc4a4e3ec94e41c846e6a263c165e8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1865 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-01-15Conform to C99 integer types format specifiersHsiangkai Wang
Review and modify to conform to C99 integer types format specifiers. Use arm-none-eabi toolchain to build successfully. Change-Id: If855072a8f88886809309155ac6d031dcfcbc4b2 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Signed-off-by: Hsiangkai <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1794 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-15Grammatical cleanup to Tcl Scripting chapter of User's GuideRobert P. J. Day
Changes solely to the Tcl Scripting API chapter of the UG: * Some grammatical cleanup * Fix formatting issues (@example and @verbatim formatting) * Add references to missing OSes OpenBSD, NetBSD and eCos. Change-Id: I3ec1a192a0b1e0a207dceb76fd39008d01e287a5 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1872 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-15Atmel samd: add support for SAMD21Andrey Yurovsky
Tested with SAMD21J18A on the SAMD21 Xplained Pro board. Change-Id: Ice9ebcd229ed038b3193baf92d910f9256d7ce91 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1873 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11cortex_m: Avoid unnecessary saving and restoring of DCRDRAndreas Fritiofson
This is used for the emulated DCC channel which is only maintained as long as target->dbg_msg_enabled is set. Skip the saving and restoring if not enabled to save one dap_run() per core register access. Note that we could've probably queued all core register accesses in the same transaction if the armv7 register framework hadn't required synchronous register accesses. Change-Id: I4fe6d713261ee5db42422203eb63035fdcc48891 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1848 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11adi_v5: Remove unnecessary MEM-AP access functionsAndreas Fritiofson
It's far nicer to pass a size parameter than to split the calls to separate wrappers which are combined to a single function anyway. Change-Id: I716741ebf916f6f8e9358a31c8f4fe761107c82f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1847 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11cortex_m: Fix possible endianness problem in emulated DCC channelAndreas Fritiofson
Change-Id: If7104464a8c65085f3ceac445e9c9be8446f2da9 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1846 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11target: Add test bench for memory access functionsAndreas Fritiofson
Change-Id: I86e6fe4d0b4d580389ae5e1d3f4813d1e25b2613 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1629 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11lpc2000: fix LPC810 programming supportNemui Trinomius
IAP commands fail on programming LPC810 because it has only 1kByte of SRAM. This patch is fixing cmd51_max_buffer suitable size for LPC810,LPC811 and other LPC1000 series. Tested on a LPC810,LPC812,LPC11u14,and LPC1114(DIP28). Change-Id: Iecec9fd963cb63bdff4a7bd3bbf4f8b1a7c60fbd Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/1843 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11A few more grammar and typo fixes from the User's Guide.Robert P. J. Day
More cleanup from some of the later chapters from the User's Guide, no functional changes. Change-Id: Ib2860fc2574503e8107935d79db45fa96014fe3a Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1863 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11Remove obsolete tip referring to 2010 removal of TAP numbers.Robert P. J. Day
Remove a tip describing the discouraged use of TAP numbers, and how these numbers would be removed by mid-2010. Change-Id: Iebe7e2e4a0f8e1f18a91d7935588dd9ced2b398d Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1862 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11Proofreading, typo and grammar fixes to Ch 10 User's Guide.Robert P. J. Day
Various cleanups to Chapter 10 of the User's Guide, no functional changes. Change-Id: I055d032eacc8e85b1d8edbd4bcc505f6f0feaa49 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1861 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11Some minor URL fixes and typo fixes, no functional changes.Robert P. J. Day
Change-Id: Ib262d9e6330c35d26868942b821de7b53e00b854 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1859 Tested-by: jenkins Reviewed-by: Bill Traynor <btraynor@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09add support for Atmel SAMD NOR FlashAndrey Yurovsky
This adds a new NOR Flash driver, "at91samd", which supports the built-in Flash on Atmel's D-series Cortex M MCUs, starting with the D20. Parts and their geometry are detected automatically using the DSU and lookup schemes described in the D20 document, 42129F–SAM–10/2013. Future D-series variants and families should presumably use this controller as well (possibly with minor changes and improvements). Tested on the SAMD20 Xplained Pro board, for which we also add the corresponding Flash configuration. Change-Id: Id8d3dd601e9f53121682d1a1190d0be4ea3b83eb Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1684 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09add support for Atmel SAM4L NOR FlashAndrey Yurovsky
This adds a new NOR Flash driver, "at91sam4l", which supports the built-in Flash on Atmel's low-power SAM4L family of Cortex M4 MCUs. Parts and their geometry are detected automatically using the Chip ID and lookup schemes described in document 42023E–SAM–07/2013. Tested on AT91SAM4LC4CA via the SAM4L XPlained Pro development kit. Change-Id: If73499dee92cc8ce231845244ea25c6984f6cecd Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1639 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09cfg: add initial Atmel xplained kit supportSpencer Oliver
These kits feature a CMSIS-DAP compliant debugger and so have been added as part of the pending support. Currently the flash drivers for the L8 and D20 are wip. One issue this implementation of CMSIS-DAP raised is that it supports 512byte HID reports, however using the current HIDAPI we have no cross platform way of querying this info. Long term we plan to add this support to HIDAPI. Change-Id: Ie8b7c871f58a099d963cd71a9f8a0105a38784e9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1625 Tested-by: jenkins
2014-01-09cfg: add stm32 cmsis-dap compliant configSpencer Oliver
Change-Id: I3cfb21fdcef830e22b03bf4b5d58993728cc7475 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1543 Tested-by: jenkins
2014-01-09cmsis-dap: add initial cmsis-dap supportSpencer Oliver
This is based on work from: https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap Main changes include moving over to using HIDAPI rather than libusb-1.0 and cleaning up to merge into master. Support for reset using srst has also been added. It has been tested on all the mbed boards as well as the Freedom board from Freescale. These boards only implement SWD mode, however JTAG mode has been tested with a Keil ULINK2 and a stm32 target - but requires a lot more work. Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1542 Tested-by: jenkins
2014-01-09command: Fix formatting for empty usage stringAndreas Fritiofson
Introduced by requirement in 54d6330b. Change-Id: If3dba057127b54b15ca7f364f37c6286d34f77e0 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1858 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl/netgear-dg834v3.cfg: add to easy firmware recovery listPaul Fertser
Change-Id: I6e5205ec41c58dc2fe3fb0051c30918507ef1e88 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1851 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tools: add firmware recovery helpersPaul Fertser
This adds a set of helper functions with the aim to make it possible to flash mass-market devices without RTFMing altogether (i.e. to obsolete GPL-violating proprietary tjtag and other similar software). Real-life tested on an RT-N16 and WRT54GL. Change-Id: I197a9b28a5f386803f081057c4b4ebf2f9c447b1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1850 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl/board: add Linksys WRT54GL v1.1 board configPaul Fertser
Tested flashing a real v1.1 device. Change-Id: Ie0d202b9fded8b92e731d93e0ef17be415a75fc8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1852 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl: add bcm47xx config and Asus RT-N16 board using itPaul Fertser
This adds the bcm47xx config with the special undocumented trick to put it into standard EJTAG mode from the mystic "LV mode". The RAM setup is not done as it would require considerable efforts without much practical gain. The only issue I noticed so far is that "reset" doesn't actually reset the chip. Unfortunately, it's unclear how to make it work properly with SRST as OpenOCD asserts it in MIPS-specific code so the device will enter LV mode again but the LV tap is already disabled by that time, so it's not possible to send the magic command again. Anyway, this config is more than enough to "recover" any RT-N16 provided the hardware is not damaged. Change-Id: I0894e339763e6d20d1c93341c597382b479d039b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1849 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08Allow "tcl_port" to be run after config to simply display the port.Robert P. J. Day
To be consistent with gdb_port and telnet_port, allow tcl_port to be run to display the configured port number, while still not allowing the user to change it after configuration. Change-Id: Ibe6aedb3bd447f2985e42dd8246358481a047dd6 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1857 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08Update URLs and names in amdm37x.cfg, no functional changes.Robert P. J. Day
* openocd.berlios.de -> openocd.sourceforge.net * Update link to AM/DM37x Technical Reference Manual (ver R) * "ICEpick" is properly spelled "ICEPick" according to TI Change-Id: Ie04458e82c97ef766ec03bd9b9f27edadf5d1cb2 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1856 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08Numerous pedantic fixes to the User's Guide, including typo fixes,Robert P. J. Day
grammar fixes and so on. Change-Id: Iaeb603447ecd9f77f1d49ce77044431442f4f219 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1855 Reviewed-by: Bill Traynor <btraynor@gmail.com> Tested-by: jenkins Reviewed-by: Francois Lorrain <francois.lorrain@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-31jtag_vpi: make the server address configurableFranck Jullien
Change-Id: I58e89c789b79ffb0b54ef94d208be876c271ddf7 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1840 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-30target/image: allow for comments in IHEX filesFranck Jullien
This is not in the Intel hex file format specification but some hex files may include comments (i.e. Altera USB-Blaster II firmware) starting with '#'. This patch makes image_ihex_buffer_complete_inner to skip comment lines. Change-Id: Id1f57d84d75da45e592f1c72b2b8c29193bc14e3 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1842 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-30topic: Added Spansion S25FL128S and S25FL256S spifi devices.Steve Moorby
S25FL256S device tested on mbest LPC4357 EVM, S25S128S untested but from the same data sheet. Change-Id: Idf58416aab08671fe29d22c3c34c2118b25a9d45 Signed-off-by: Steve Moorby <steve.moorby60@gmail.com> Reviewed-on: http://openocd.zylin.com/1844 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-12-22kinetis : Add timeouts to flash status checking in dap_syssec_kinetis_mdmap().Per Ekman
Change-Id: Ifc8fe7aa4c2a40a78fa0655435e82418f549bad3 Signed-off-by: Per Ekman <pekenator@gmail.com> Reviewed-on: http://openocd.zylin.com/1819 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22stlink: remove stlink_api commandMathias K
Remove stlink_api command. Change-Id: I8f7885d3756fec462f9ebbee2ed285a98a51366c Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1760 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22kinetis : Detect MCU flash parameters based on the SDID register.Per Ekman
Try to detect the flash parameters based on the MCU SDID register. The hope is that this works for K and KL series MCUs but it has only been tested on a K21. YMMV. Change-Id: Idfe71383a449065267f393b09ee3c3b24ac6a803 Signed-off-by: Per Ekman <pekenator@gmail.com> Reviewed-on: http://openocd.zylin.com/1823 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22Add %APPDATA%\OpenOCD to script search path on winAndreas Fritiofson
Change-Id: I01e9715fe064f3ff41e41a59a4764d6474f82183 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1797 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22Remove special handling of script search path on WindowsAndreas Fritiofson
On all platforms, search for scripts in $HOME/.openocd ${run_prefix}${pkgdatadir}/site ${run_prefix}${pkgdatadir}/scripts On Windows, set run_prefix to the runtime path of the executable, minus ${bindir}. This is to enable the install dir to be moved anywhere, as long as the structure of the install dir is kept intact. On all other platforms, run_prefix is empty. The script paths can now be adjusted on Windows builds the normal way; by overriding pkgdatadir at build time. For example, to create a Windows package layout of bin/openocd.exe scripts/interface/... scripts/target/... you can do configure --prefix= --enable-... and then make pkgdatadir= DESTDIR=/some/path clean all install Also, remove the unused PKGLIBDIR define. Change-Id: If2c8228fc80c598d763efad21c5f51695ff9b6cf Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1796 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22target/imx6: Fix typo in setting _SJC_TAPID from SJC_TAPID variableAlex Murray
The set command was missing the $ prefix on the SJC_TAPID variable and so would fail if SJC_TAPID was set Change-Id: Ib9af58f5188bd8a2bc3f888309f203d624476c27 Signed-off-by: Alex Murray <alex.murray@cohdawireless.com> Reviewed-on: http://openocd.zylin.com/1811 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22Avoid 'may be used uninitialized' warning from FreeBSD base GCCEd Maste
Change-Id: Ice2472bf7a467652485a5a8c36880c6a47d64c6c Signed-off-by: Ed Maste <emaste@freebsd.org> Reviewed-on: http://openocd.zylin.com/1835 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22build: remove hard coded ftdi and usb librariesMathias K
This patch remove the hardcoded libraries. Also a check for libftdi1 installations was added. This check fix an issue with gentoo and maybe other systems. Change-Id: Ieff9ec4d66ee0f3e6b22261a10e4cab9f26b6b51 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1759 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22jtag_vpi: fix build errors under MinGWFranck Jullien
Change-Id: Ic13f9982014ead811e2f2d737ca1621e0e85577e Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1839 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-19target: add kl25z HLA (stlink) configPaul Fertser
Based on Nemuisan Tokusei's. Untested, but original config was reported to work ok. Change-Id: Ic991dce55bfca266880081fe2bbd9e6e263b0fc0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1803 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-17at91sam7sx.cfg: fix use $_TARGETNAME as target identifier, not '0' warningSergey A. Borshch
all other at91 cfg files already has this fix. It also fix "No flash at address 0x...." error when JTAG chain consist of more than one at91sam7sx cores during attempt to flash other than first mcu in chain. Change-Id: I7785d9103d0fc494b6a823e2c73f850373ffe112 Signed-off-by: Sergey A. Borshch <sb-sf@users.sourceforge.net> Reviewed-on: http://openocd.zylin.com/1812 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-17cfg: Add new BSTAPID for STM32F42xxx and STM32F43xxx seriesNemui Trinomius
STM32F42xxx & STM32F43xxx series boudary scan TAP-ID are differ from STM32F405xx/07xx & STM32F415xx/17xx. And Section number was also fixed for RM0090 rev5. Tested on a STM32F427IIT6 and STM32F429ZIT6. Change-Id: Ie9c54c55b97b9c396ace752d94ea2ad916cc8479 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/1808 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-17fix flash bank auto_probe() fail with multiple targetsSergey A. Borshch
get_flash_bank_by_addr() iterates through all flash banks trying to auto_probe() every bank, even if bank can belongs to target other than requested, and this other target can be in non-halted state, which leads to error message and operation abort. Same situation in gdb_new_connection() and gdb_memory_map(): get_flash_bank_by_num() tries to auto_probe() requested bank, so first get bank by get_flash_bank_by_num_noprobe(), check if it belongs to current connection's target and skip get_flash_bank_by_num() (actually autoprobing) if not. Change-Id: I48b3f93dddcd9283394f14ad2de3248397c75ab3 Signed-off-by: Sergey A. Borshch <sb-sf@users.sourceforge.net> Reviewed-on: http://openocd.zylin.com/1813 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-12-17versaloon: Finish support for serial number matchingAndreas Fritiofson
Add a command to specify the serial string and pass it to the find helper. Actual matching was already supported for both serial and product but was using hard coded string indices. Instead use the indices from the device descriptor. Change-Id: I17c7538e5ad301ef41eace1ee70a202adab23bb4 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1816 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14tcl/target: add config for Milandr's 1986ве1т controllerPaul Fertser
This is a Cortex-M1 controller targetting aviation appliances. Contributed (and live-tested) by 8daemon. Change-Id: I133d6122cf6492b51ddbdbd800c16ba121d51bf3 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1818 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14ftdi/neodb.cfg: mark as testedPaul Fertser
Working against openmoko gta02 target, including TRST and SRST (the stupid samsung chip fully resets under trst, so it's actually of little use here). Change-Id: I831124659fc12efbccef536f07d15509c2112f92 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1814 Tested-by: jenkins Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14topic: Support for the Xilinx BSCAN_* Virtual JTAG in OpenriscSergio Chico
This add support to the Xilinx BSCAN_* virtual JTAG interface. This is the Xilinx equivalent of the Altera sld_virtual_jtag interface, it allows a user to connect to the debug unit through the main FPGA JTAG connection. Change-Id: Ia438e910650cff9cbc8f810b719fc1d5de5a8188 Signed-off-by: Sergio Chico <sergio.chico@gmail.com> Reviewed-on: http://openocd.zylin.com/1806 Tested-by: jenkins Reviewed-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14stm32lx_dual_bank.cfg: fix typo in file pathAndrey Yurovsky
s/stm32l1x/stm32lx ...this makes tm32lx_dual_bank.cfg work again. Change-Id: I04dc617523caa6b46c675fe9b700d1bbe88170e6 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1832 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 11:44:58 +0000