aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-29jim-nvp: Make Jim_GetOpt_String const-correctAndreas Fritiofson
Change-Id: Iae9824f6ff47a1944e674e59bfaa970904645082 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3178 Tested-by: jenkins
2016-02-29Cortex-A/R: Fix Mask-ISR parsingEvan Hunter
Remove needless error when not halted with wrong return. Allow usage in any mode Add error message for incorrect arguments Change-Id: I3e94e159609351e503ed3f35760503079e3aa53c Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/3195 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29Cortex-A/R: Add missing timeout for loop polling DSCR & fix timeout typesEvan Hunter
Change-Id: I345658cfdc8a34a98418727423ac6bd562e980f3 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/3201 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29fm4: Add support for S6E2DH familyAndreas Färber
Add support for S6E2DH MainFlash. VFlash is not implemented. Briefly tested with SK-FM4-176L-S6E2DH V110 board. Change-Id: If7c523d8c75307bc1494bbf4cca3eed0272e8e01 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3158 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29fm4: Add support for MB9BFx64/x65Andreas Färber
These appear to be just additional flash size configurations. Entirely based on manual, untested. Change-Id: I4460dc1a588335df8fc0a385d24513a4e35b6951 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3157 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29armv4_5: support weirdo ARMv6 secure monitor modeLinus Walleij
On the ARM PB1176JZF-S the system comes up in secure monitor mode after reset. However the modebits in CPSR form the value 28 (0x1c) and CPSR is 0x800001dc deeming it UNRECOGNIZED. Define this mode to be synonymous to mode 22 (MON) and things start to work like a charm. Change-Id: I001f7773ee1076202c0c633e466d2d833f7a1413 Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-on: http://openocd.zylin.com/3196 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29flash: nor: mdr: implement read/verify for Info memoryPaul Fertser
This adds necessary code to obtain data from the Info region which is not memory-mapped so can't be read the usual way. With this "flash read_bank" and "flash verify_bank" commands should start to work as expected for the Info memory block. Change-Id: I57e4b80fff577500cfa85954b625fe9c9ff92aa5 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3227 Tested-by: jenkins Reviewed-by: Eldar Khayrullin <eldar.khayrullin@mail.ru> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29armv7m: Integrate build of erase check codeAndreas Färber
Instead of documenting the file path as a comment and inline-commenting the THUMB bytecode, include the hex array via preprocessor. This assures the path is actually up-to-date and facilitates updating the code. Change-Id: Ieb0a7cd0bc14882ac96750f524616d9768a0c6f5 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3134 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29xmc4xxx: Integrate build of erase check codeAndreas Färber
Instead of pointing to the assembler sources in a comment and inline-commenting the THUMB bytecode, place the hex array alongside the assembler sources and include it via preprocessor. Originally inspired by a typo in the file path during driver development, but it also facilitates making changes to the assembler sources. A Makefile is provided to help automate updating the bytecode. It is not integrated with the automake system to avoid forcing an ARM cross-compiler onto every user, i.e. after modifying the sources they need to be rebuilt in that directory before building the usual way. ARM_CROSS_COMPILE= can be passed on the make command line to deal with native ARM toolchains or with varying prefixes of cross-toolchains. Change-Id: I00ceb980a68c8554a180dd13719ac77b677a8bcd Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3133 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-02-29flash: New Spansion FM4 flash driverAndreas Färber
The Spansion FM4 family of microcontrollers does not offer a way to identify the chip model nor the flash size, except for Dual Flash vs. regular layout. Therefore the family is passed as argument and wildcard-matched - MB9BFx6x and S6E2CC families are supported. Iterations showed that ... 1) Just doing the flash command sequence from SRAM loader code for each half-word took 20 minutes for an 8 KB block. 2) Doing the busy-wait in the loader merely reduced the time to 19 minutes. 3) Significant performance gains were achieved by looping in loader code rather than in OpenOCD and by maximizing the batch size across sectors, getting us down to ~2 seconds for 8 KB and ~2.5 minutes for 1.1 MB. (Tested with SK-FM4-176L-S6E2CC-ETH v11, CMSIS-DAP v23.) gcc, objcopy -Obinary and bin2char.sh are used for automating the integration of hand-written assembler snippets. Change-Id: I092c81074662534f50b71b91d54eb8e0098fec76 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2190 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29at91sam4 Flash: Added identification of atsam4n'sColin Helliwell
The Flash driver for at91sam4 cpu's has been enhanced to recognise and support the SAM4N family. Change-Id: I50c471a6053b52edffd8efdd8abfe516cc5c55ee Signed-off-by: Colin Helliwell <colin.helliwell@ln-systems.com> Reviewed-on: http://openocd.zylin.com/3242 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29stm32lx.c: Print device string as info.Uwe Bonnes
Change-Id: I893f0d9a5095a9f122adc76cf403277639fa880c Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3362 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29stm32lx.c: Add STM32L0 categories 1, 2 and 5.Uwe Bonnes
Change-Id: I493072a856a66e4cd60de490a0937287db4b5c4d Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3360 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29tcl/target/stm32f4: fix: reduce adapter speed before resetAlexander Kurz
The reset-init hook for this target speeds up the CPU clock and JTAG adapter speed. When the target is reset running with high adapter speed, a series of warnings "DAP transaction stalled (WAIT) - slowing down" will be generated since the adapter speed is not reduced to fit the slower CPU speed. Fix: reduction of the adapter speed before a reset is performed. Change-Id: Iabfc8e3f70311e0e71c8eed09b8a37fcbed9c58d Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3365 Tested-by: jenkins Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29flash/nor/faux.c: fixing check for failed mallocAlexander Kurz
Error found by static code analysis using the semantic pattern null_ref2/mini_null_ref2.cocci, see coccinellery.org Change-Id: Ic817c29f0ccf2b41fc8f7d9a480ad30d6e5b7ab8 Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3364 Tested-by: jenkins Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29arm_disassembler: bugfix, MRRC instruction not recognizedAlexander Kurz
A copy-and-paste error in the arm_disassembler opcode evaluation disabled the recognition of MRRC instructions. According to the arm architecture ref. manual issue E or later, MRRC and MCRR instructions are identified by opcode bits 20-27: MCRR = 0xc4, MRRC = 0xc5. Error found by static code analysis using a semantic pattern to detect duplicated tests xand.cocci, see coccinellery.org Change-Id: Ic41426edb51c6816e11dc3d35ef9382ab34af486 Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3363 Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29flash/nor/stellaris: fix: flash info RCC and RCC2 mixed upAlexander Kurz
The flash info command on stellaris platformes "TI/LMI Stellaris information ... rcc is ..., rcc2 is ..." presented the actual RCC2 register as rcc and an uninitialized variable as rcc2 due to a copy and paste error. Found using the semantic pattern da/da.cocci, see coccinellery.org Change-Id: I6f920fc3e07fdc085ea8e2248fbc9453eb8393dc Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3368 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29flash/nor/non_cfi.c: cleanup, member double-intializationAlexander Kurz
A struct member has been initialized twice. Found using the semantic pattern da/da.cocci, see coccinellery.org Change-Id: I0320afd60f1ba505758cc5bc0adcf27f572492fb Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3369 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29Cleanup: removal of obsolete semicolonsAlexander Kurz
Obsolete C source code semicolons were removed using the semantic patch semicolon/semicolon.cocci, see coccinellery.org Change-Id: I153b4995a9e028ebaf5f58c947821dc78345a777 Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3367 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29cfi intel: fixing faulty flash write error messageAlexander Kurz
Writing to Intel CFI flash with unaligned tail bytes raised a false error message although all data was programmed successfully. e.g.: > flash write_image image 0x602e0000 bin > Programming at 0x602e0000, count 0x00000002 bytes remaining > couldn't write word at base 0x60000000, address 0x602e0000 > error writing to flash at address 0x60000000 at offset 0x002e0000 Root cause for this false error was a mixup of two result variables introduced with ecc8041c. Change-Id: Ib6b85293dbed946a36a307e5b198c47b901145bf Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3233 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-27nrf51: move hwid 0057 and add 0058Peter A. Bigot
Chip markings: N51822 / QFAAG2 / 1435CZ for HWID 0057 N51822 / QFAAG3 / 1436AJ for HWID 0058 Change-Id: I242b94d6a2362aae0de970c7ac77811c76dacdc0 Signed-off-by: Peter A. Bigot <pab@pabigot.com> Reviewed-on: http://openocd.zylin.com/3187 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-27nrf51: move table entry for hwid 0084 to correct MCU sectionPeter A. Bigot
This is a nRF51822 variant, not a nRF51422 variant. Change-Id: Ia199e0afa39408d7391a9655bad47eba2fd85f14 Signed-off-by: Peter A. Bigot <pab@pabigot.com> Reviewed-on: http://openocd.zylin.com/3105 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-25arm_adi_v5: Rewrite dap_rom_displayAndreas Fritiofson
Simplify by printing one component per call, instead of one complete ROM Table per call. Print common information the same way for all components, including ROM tables, because ROM tables (at least the top level) contain useful information in their identification registers, such as the manufacturer of the SoC. Print component designer name using the JEP106 helper when available. Change-Id: Ic51bccd98acfae6886243500153fbdd567be2fae Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3182 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: James Mastros <james@mastros.biz>
2016-02-23xmc4xxx: Add XMC4700 supportAndreas Färber
Tested with EES-AA revision chips on Relax Kit for 5V Shields and Relax Lite Kit. Change-Id: I17d4479657bad0516d4c10c2ad7e745d59e678b7 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3136 Tested-by: jenkins Reviewed-by: Jeff Ciesielski <jeffciesielski@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-02-22adi_v5_swd: Avoid special handling the SELECT cache during connectAndreas Fritiofson
The cache is forced to zero to match the value expected by the DPIDR read so the connect sequence is not destroyed by a SELECT update. However, DPIDR and in fact all registers except address 4 are independent of the current DPBANKSEL value. Change swd_queue_dp_bankselect() to use this fact and avoid touching SELECT for those registers. Change-Id: I0cd11925fb6adef481bbf45cc24ea2c6dab4b6fb Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3231 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-02-22adi_v5: Remove forgotten FIXME definitionAlamy Liu
Investigation: - mem_ap_read_buf_u32() no longer exists. - JTAG_DP_DPACC & JTAG_DP_APACC are defined in adi_v5_jtag.c now. Change-Id: I136fc3f389a5a4eb9b68bc759ce653b6da7fa75e Signed-off-by: Alamy Liu <alamy.liu@gmail.com> Reviewed-on: http://openocd.zylin.com/3243 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-15Kinetis: flash driver described in openocd.texiTomas Vanek
Change-Id: Id3410fc94f73191e3d7810115676046e5c760a0b Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3014 Tested-by: jenkins
2016-02-15Kinetis: check/switch run mode before flash operationTomas Vanek
FTFx flash controller requires MCU in normal RUN mode. Flash cannot be erased, programmed or blank checked in VLPR or HSRUN modes. VLPR mode is switched to RUN mode as it does not require any changes in clock generator setting. VLPR can be active from reset on some KLx devices (with some FOPT setting) so 'reset init' might not be sufficient to get device to normal RUN. Any other mode than RUN or VLPR is reported as an error. Change-Id: I60f494ce0d534b04870c6219d9b05f66f7244433 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3012 Tested-by: jenkins
2016-02-15Kinetis: invalidate flash cache after erase/writeTomas Vanek
Cached old flash contents broke verify readback on Kx devices. Change-Id: I0effaf358f451b473f0d9c762a133ffd21bc64b4 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2993 Tested-by: jenkins
2016-02-15Kinetis: improve flash detection using SIM_FCFG2 MAXADDR0 and MAXADDR1Tomas Vanek
Autodetect 1 or 2 flash blocks devices and recheck bank sizes. Correct pf_size calculation for 2 MB devices. Change-Id: Ib3b68db9ec5356b8d5dc73c9f12053f7476bf474 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2992 Tested-by: jenkins
2016-02-15Kinetis: nvm_partition commandTomas Vanek
Command for partitioning FlexNVM to data flash and EEPROM blocks Change-Id: Ia0ea65d72b0e5f23da330520284b0bd26435e444 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2991 Tested-by: jenkins
2016-02-15Kinetis: fix preparation of FlexRAM before flash programmingTomas Vanek
FlexRAM should be requested before any section programming. Test FCNFG RAMRDY bit before issuing FTFx_CMD_SETFLEXRAM to speed up operation and to cover pflash only devices. Change-Id: Ib0f2d8e8ab8b1507cbf2b7f8565178ab79941f5d Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2990 Tested-by: jenkins
2016-02-15Kinetis: kinetis_ftfx_command() based on target instead of flash bankTomas Vanek
kinetis_ftfx_command() did not use other struct flash_bank* members than base->target. Switching first parameter to struct target* enables use of kinetis_ftfx_command() without unnecessary bank getting and probing. Removed kinetis_securing_test: kind of dead code, same function as command flash erase_address pad 0x400 0x10 Removed "NAND" word from help as flash is obviously NOR Change-Id: I3f5fc295ef2bf42f3e913549949f2a36377f6367 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2988 Tested-by: jenkins
2016-02-15Kinetis: FlexNVM handlingTomas Vanek
FlexNVM (data flash) is memory mapped at 0x10000000. Driver used to send the same address to FTFx controller for erase/write ops. This was wrong as FTFx accepts only low 24 bits of address. To fix addressing for flash controller kinfo->prog_base was introduced. Added FlexNVM protection check, blank check and data flash size calculation. Blank check cannot use block operation on FlexNVM when EEPROM backup is enabled. Removed non functional reassign logic and bank_ordinal stuff. Now one can re-probe FlexNVM banks after nvm_partition change. Change-Id: Ia60b938266963e5d056701278cdf7bf2f62a429a Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2987 Tested-by: jenkins
2016-02-14Add board config for ST NUCLEO L476RG boardFreddie Chopin
The file was contributed by Sébastien Lorquet. Change-Id: I118f5b16181488b9e3327891e6130b908419f1c4 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/3214 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-13jlink: Update for libjaylink API changesMarc Schink
This patch also addresses a problem with devices where no serial number is available. For further details, see: http://repo.or.cz/libjaylink.git/commit/7e0508d8487f65f71411117dff2e0b093e00bc80 Such devices are now ignored if device selection via serial number is used. Nevertheless, these devices are still usable by using the USB address for device selection or just by omitting device selection. The latter one is only possible if only one device is connected. Change-Id: I5763db25e97ba3d924cb642da7e64e951e09ecb7 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3225 Tested-by: jenkins Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-13cmsis-dap: Fix CMSIS-DAP serial number processing.anpilog
Check CMSIS-DAP adapter has serialnumber before pass it to wcscmp. Keep looking for onother adapter if choosed one doesn't have correct serialnumber. Change-Id: I7d386a03cb49b9baf22073ae1c6b14269ed3b618 Signed-off-by: Andrii Anpilogov <anpilog@gmail.com> Reviewed-on: http://openocd.zylin.com/3226 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-13add Digilent HS2 supportAndrew Kohlsmith
Change-Id: If506c33f22d95f4c47f30c4348d461197c976fdd Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3160 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-13flash: nor: nrf51: add hwid 0x0057Jacob Rosenthal
Change-Id: I43b9dc1ce254a8ee8c84ad8e25bb809eb8629e13 Signed-off-by: Jacob Rosenthal <jakerosenthal@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3102 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-13cfi: support for 16-bit flash with reversed endiannessEsben Haabendal
This is for targets where flash controller has reverse endianness compared to target. For these, the 'bus_swap' parameter can be given to the CFI driver, which will cause command CFI commands to be written with bytes swapped. This is only for x16 CFI flash. Change-Id: I698b768e92e65d160232e90b0e81a824e3c81a46 Signed-off-by: Esben Haabendal <esben@haabendal.dk> Reviewed-on: http://openocd.zylin.com/3041 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-13Change isa stringKent Brinkley
Laying the ground work for adding microAptiv core Change-Id: I161a8a8cb250240ebc8518c91e746d6f921c41c7 Signed-off-by: Kent Brinkley <jkbrinkley.imgtec@gmail.com> Reviewed-on: http://openocd.zylin.com/2400 Tested-by: jenkins Reviewed-by: Mindy Beseler <mbeseler@yahoo.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-13jtag ftdi: sample TDO on falling edge of TCKMatthias Welwarsky
Due to signal propagation delays, sampling TDO on rising TCK can become quite peculiar at fast TCK rates. However, FTDI chips offer a possiblity to sample TDO on falling edge. With this change, stable operation can be achieved at 30MHz clock even over 10cm ribbon cable. Change-Id: Icaf240535dae15512e3c60a944e22a5fbc1b0b06 Signed-off-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on: http://openocd.zylin.com/3180 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-02-13flash/nor/spi: reorder to group micron devicesRobert Jordens
Change-Id: Ic5b13e8b994d0741a0a12cd7ed427191b42958e2 Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/3207 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2016-02-13quark: add Intel Quark mcu D2000 supportIvan De Cesaris
Add support for the Intel Quark mcu D2000 using the new quark_d2xx target. Changes to the lakemont part are needed for the D2000 core and backwards compatible with the X1000 one. Change-Id: I6e1ef5a5d116344942f08e413965abd3945235fa Signed-off-by: Ivan De Cesaris <ivan.de.cesaris@intel.com> Reviewed-on: http://openocd.zylin.com/3199 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-13Helper time_support: const function argumentsAlexander Kurz
duration_elapsed and duration_kbps will not modify the struct duration passed as function argument, hence it should be declared const. Change-Id: I459c396952c78e907257e2c2f2c630abde92aaa8 Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-10adi_v5_swd: invalidate dap->select during (re)connectTomas Vanek
Commit 830d0c55c0920606366a15560d1945f1e1942744 introduced a regression in error recovery after reconnect: If first SWD queue run in dap_dp_init() fails, DP_SELECT does not get reset. Change-Id: I947e2afe9933e4645a6141ece7816af8e6082cf2 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3194 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-03tcl: Support for the miniSpartan6+ board.Tim 'mithro' Ansell
* https://www.scarabhardware.com/minispartan6/ * https://github.com/scarabhardware/miniSpartan6-plus/raw/master/miniSpartan6%2B_Rev_B.pdf The miniSpartan6+ board is wired identically to the Pipistrello device but sadly doesn't have a custom device description. Change-Id: I07fd57b1ec87d72edf68860684928a3781e2f08a Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com> Reviewed-on: http://openocd.zylin.com/3117 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-02-03tlc/board: Add ATMEL SAM E70 Xplained configManuel Limones
atmel_same70_xplained config using on board embedded debuger Change-Id: I650ec538b42653662bc273e9f3581a6eda95cd39 Signed-off-by: Manuel Limones <limonesu.me@gmail.com> Reviewed-on: http://openocd.zylin.com/3208 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-02-03flash: nor: {pic32mx,cfi}: fix register namesPaul Fertser
Commit fd43be07265b5f3cf3146f2bb80c1c2fc0a44fcf introduced a regression: since the register names were changed from those traditional for MIPS to common GDB scheme the code that makes use of them needs to be changed accordingly. This commit restores pic32mx flash driver functionality. Change-Id: Id18c739390fae36737a02dc30c363d0444f53b96 Reported-by: Louis Rannou <louson@users.sf.net> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3206 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-01-29flash/nor/niietcm4: minor fixesBogdan Kolbov
niietcm4_write() buffer padding: add correct buffer padding for 16 bytes. Args check in FLASH_BANK_COMMAND_HANDLER(): first version of the driver had 7 args, current - 6. This patch will fix error when flash is rejected (current k1921vk01t.cfg has flash bank init with 6 args). Timeouts in flash flag checking procedure: increase timeouts in niietcm4_opstatus_check() and niietcm4_uopstatus_check() cause there were problems in some hardware configurations. JTAG ID: wrong id in k1921vk01t.cfg replaced with right one. Signed-off-by: Bogdan Kolbov <kolbov@niiet.ru> Change-Id: I84296ba3eb4eeda4d4a68b18c94666f1269a500f Reviewed-on: http://openocd.zylin.com/3171 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 18:38:39 +0000