aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-25server/server: Remove all exit() callsMarc Schink
With this patch OpenOCD shuts down properly when errors occur in the server instead of just calling exit(). Change-Id: I2ae1a6153dafc88667951cab9152941cb487be85 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3223 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2017-04-25stm32l4: support flashing L496 devicesJuha Niskanen
Change-Id: I3effc5b675c853433170391c5eaf46edc067b6e7 Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com> Reviewed-on: http://openocd.zylin.com/4108 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24mips32, add generic scan 32 functionSalvador Arroyo
Will be used later, allow queuing all needed scans in a pracc access. This makes faster execution with ftdi based adapters working in sync with pracc. Added now because the overall code is shorter. Change-Id: Ib32b89307b75785f88870db8d7c9255dc5bbd426 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/4005 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24mips32, pic32 use uint8_t in 8 bit scan functionSalvador Arroyo
Makes code shorter. Change-Id: I6cc01adffbea063ccb071ddf3a3e3d81727b29ce Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/4004 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24tcl/board: Add STMicroelectronics STM32F7 Nucleo configMarc Schink
Tested with STM32F746ZG Nucleo development board. Change-Id: Ia97b774b996a3be03e8e84342b93659c3632c18f Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3516 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24udev: Add rules for Ambiq Micro EVK's.Karl Palsson
Udev rules for Ambiq Micro ftdi based EVK's. Two new vid:pid's: 2AEC:6010, and 2AEC:6011. Udev rule for multi-target Debug board 2AEC:1106 Change-Id: Id7430d0c70647752375230f4024be9f7a2ba95ce Signed-off-by: Rick Foos <rfoos@solengtech.com> Signed-off-by: Karl Palsson <karlp@tweak.net.au> Reviewed-on: http://openocd.zylin.com/3980 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24Added 512K flashing support for em3587Byron Kubert
The Silicon Labs EM3587 and EM3588 may have 512K of flash. This fix allows for 512K to be specifiied on the command line when flashing a device. Change-Id: I18cc4bd0d14e1f2069066734a7396bcccf3de941 Signed-off-by: Byron Kubert <byronk@google.com> Reviewed-on: http://openocd.zylin.com/3795 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24libusb: Add transfer type filter to get correct epHellosun Wu
The need for this due to AICE having 3 interfaces (EP1 IN-Interrupt, EP2 OUT-Bulk, EP6 IN-Bulk). Without it, the function will choose first two endpoint as read_ep/write_ep. This filter will check transfer types when get endpoint-id. Without this patch, AICE will not get correct endpoint. Change-Id: I4da93c7de41cd19e5095b4bfb42078b21f40b678 Signed-off-by: Hellosun Wu <wujiheng.tw@gmail.com> Reviewed-on: http://openocd.zylin.com/3218 Tested-by: jenkins Reviewed-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24flash/nor/tcl: Make verify_bank parameter optionalMarc Schink
Make the 'offset' parameter optional, if omitted simply start at the beginning of the flash bank. Additionally, check if the argument is out of bounds of the flash bank. Change-Id: Id1959eee5c395666c35f26342c3c50134dd564e5 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3858 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-04-24flash/nor/tcl: Fix some format specifiersMarc Schink
Change-Id: I2255aede9713cb7ef538d7433dd900d8da7a51ad Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3857 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24tcl STM32L0xx - add support for dual banked targets and for Nucleo-64 STM32L073Jan Čapek
- stm32l0_dual_bank.cfg - implement dual bank configuration - st_nucleo_l073rz.cfg - implement new board script Change-Id: Ie8063e5bec45069a63d414d81b2068fe3cc7e4d7 Signed-off-by: Jan Čapek <jan.capek@braiins.cz> Reviewed-on: http://openocd.zylin.com/3957 Reviewed-by: Cezary Gapiński <cezary.gapinski@gmail.com> Reviewed-by: Karl Palsson <karlp@tweak.net.au> Tested-by: jenkins Reviewed-by: Aurelio Lucchesi <me@0rel.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24stm32lx: fix dual-bank configuration for Cat.5 and Cat.6 devicesCezaryGapinski
Default values for .first_bank_size_kb and .has_dual_banks fields described in stm32lx_parts[] do not fully describe the real device memory layouts. Basing on: STM32L0x1 RM0377 STM32L0x2 RM0376 STM32L0x3 RM0367 STM32Lxxxx RM0038 correct values for memory layouts were selected: id = 0x447 STM32L0xx (Cat.5) <- dual bank flash for size 192 or 128 KBytes, single bank for 64 KBytes id = 0x436 STM32L1xx (Cat.4 / Cat.3 - Medium + / High Density) <- only one size of the bank, default values are correct id = 0x437 STM32L1xx (Cat.5 / Cat.6) <- always dual bank, but size of the bank can be different For that reason .part_info field in struct stm32lx_flash_bank is a dynamic field with fields copied from stm32lx_parts[] and overwriten to correct values for specific chips and memory sizes. Change-Id: If638cb0a9916097bfd4eda77d64feaf1ef2d2147 Signed-off-by: Cezary Gapiński <cezary.gapinski@gmail.com> Reviewed-on: http://openocd.zylin.com/4074 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2017-04-24Fix flash writing on stm32l0Armin van der Togt
Fix "couldn't use loader, falling back to page memory writes" error on stm32l0 which was caused by the use of cortex-m3 instructions in the flash loader code. The loader is rewritten using cortex-m0 compatible instructions Signed-off-by: Armin van der Togt <armin@otheruse.nl> Change-Id: If23027b8e09f74e45129e1f8452a04bb994c424e Reviewed-on: http://openocd.zylin.com/4036 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24flash/nor/at91samd: fix chip erase of a secured deviceTomas Vanek
'at91samd chip-erase' command did not work on secured device. Fix it changing address of DSU.CTRL register (see Atmel SAM D21 datasheet, 13.9. Intellectual Property Protection). While on it check error return of DSU.CTRL write. Change-Id: I83155a634a5458cdc0cc16c99c0e155eb1d8b3d6 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reported-by: Thomas Irmen <tirmen@gmx.net> Reviewed-on: http://openocd.zylin.com/4043 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24jtag/drivers cmsis-dap: do not limit speed so strictlyTomas Vanek
Adapter clock frequency is set by 32-bit number and most adapters limit the highest speed safely. There is no reason to impose strict limit of 5000 kHz if some adapters can do more. While on it give informative error message in case of zero adapter_khz. Change-Id: I45c9804678e24496ea769ea9ca6036701b04dde9 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3945 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24Add support for the ATMEL SAM G55 Xplained Pro board and CPU.Jerome Lambourg
Change-Id: Iffe59dcf9f2cb1f5949c37d11fe0d2141a47f8da Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3922 Tested-by: jenkins Reviewed-by: Leo Zhang <liang.zhang@microchip.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-23help/log.c: better error handling for "log_output"Girts
* Close previous log file if one was opened before. * Return error if opening file fails. Change-Id: I103025cd86bcac785fe39e13bc7d5f79d78e38e7 Signed-off-by: Girts Folkmanis <opensource@girts.me> Reviewed-on: http://openocd.zylin.com/3878 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-23helper/options.c: fail if unexpected cmdline arguments are presentGirts
Previously openocd would silently ignore any incorrect arguments. Change-Id: Ibb40b57b8a9e07d191215486f3b3c4920a9963c7 Signed-off-by: Girts Folkmanis <opensource@girts.me> Reviewed-on: http://openocd.zylin.com/3879 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-04-23help/options.c: add error handling for -d argGirts
Fail if we fail to set debug level. Also, clarify in usage string that -d<n> doesn't accept spaces. Change-Id: I9ea9945dc068e3e7cfd18b16ffa2a29366d6e4d1 Signed-off-by: Girts Folkmanis <opensource@girts.me> Reviewed-on: http://openocd.zylin.com/3880 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-04-23board: introduce base config for TI BeagleBone family boardsMatthias Welwarsky
This patch adds the file ti_beaglebone-base.cfg as the common base configuration for all TI BeagleBone derived boards. It also modifies ti_beaglebone.cfg to source the base board and only add the on-board JTAG adapter. Lastly, it adds a file ti_beaglebone_black.cfg with a suitable configuraton for the BeagleBone "Black" variant. Change-Id: I40cacb8abed7bdb308929713891f7b5e5b685c95 Signed-off-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on: http://openocd.zylin.com/3099 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-23nrf51: Add new HWID 0x008FDamyan Mitev
Add new entry in nrf51_known_devices_table for nRF51822 chip found on chinese Core51822 dev board. The chp has markings N51822 / QFAAH1 / 1630FW Nordic Semiconductor nRF51 Series Compatibility matrix confirms that this chip has 256K Flash and 16K RAM. Change-Id: I571d15913c6f6e02a6f09c883d7dfc5a66b57c28 Signed-off-by: Damyan Mitev <damyan_mitev@mail.bg> Reviewed-on: http://openocd.zylin.com/4091 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-23tools/scripts/checkpatch.pl: fix unescaped braceChengyu Zheng
Change-Id: If1d0fbe95223351ea098504cf24f076784b26a9c Signed-off-by: Chengyu Zheng <chengyu.zheng@polimi.it> Reviewed-on: http://openocd.zylin.com/4102 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-23added interface config file for In-Circuit's ICprog OpenOCD JTAG adapterMatthias Bock
Change-Id: I9f9758d3a30bbcca9f750f604e011e5cc25809c5 Signed-off-by: Matthias Bock <mail@matthiasbock.net> Reviewed-on: http://openocd.zylin.com/4107 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-04-23jtag/drivers cmsis-dap: fix speed setting on Atmel EDBGTomas Vanek
Without the change Atmel EDBG uses default clock freq about 168 kHz instead adapter_khz configured before interface init. Changing adapter speed after init works as expected. Testing shows the EDBG firmware resets speed to default during DAP_SWJ_Sequence. Tested with fw versions 03.1F.01AE and 02.09.0169 This change repeats the DAP_SWJ_Clock command after sending a SWJ sequence. Change-Id: Ic70457c5df635f47cad5e70b0dc83a083ea1b3a3 Reported-by: Ladislav Laska <laska@kam.mff.cuni.cz> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3944 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-23flash Kinetis: reduce a flash write message severity to infoJoakim Nohlgård
There is nothing the user can do if their device does not support sector programming, there is no reason to have this message at warning level. Change-Id: Ic9b7386e59b64fece7fbfdc543bdfeeed3eae73d Signed-off-by: Joakim Nohlgård <joakim.nohlgard@eistec.se> Reviewed-on: http://openocd.zylin.com/4105 Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Tested-by: jenkins
2017-04-23target: Fix memory leakMarc Schink
Change-Id: Ib23dfd653d8edacb890a46179e9d437c027d58e8 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/4048 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Chengyu Zheng <chengyu.zheng@polimi.it> Reviewed-by: Andreas Färber <afaerber@suse.de>
2017-04-23stlink: increase trace buffer size to maximum allowed on st-link v2 firmwareAustin Morton
Increasing the trace buffer size on the st-link itself gives openocd a greater chance of avoiding trace data overflowing within the st-link between polls when there is a large amount of data being sent over the trace port The st-link appears to split the given buffer size in half while one half is awaiting transfer over USB, the other half is being filled by DMA transfer. If you do not poll frequently enough, the DMA transfer will overflow back to the start of its current buffer, resulting in corrupted output Buffer size of 4096 bytes is the maximum allowed by the st-link v2 Change-Id: I169189b021c34f8d18de1601d78b8c5890367d68 Signed-off-by: Austin Morton <austinpmorton@gmail.com> Reviewed-on: http://openocd.zylin.com/4085 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-02aarch64: add some documentationMatthias Welwarsky
document aarch64 specific commands and common ARMv7 and v8 DAP commands Change-Id: Icbb76209735ec734f2e67f82bfc7270edb40ad0b Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4008 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-04-02aarch64: clear CTI halt event early at debug entryMatthias Welwarsky
The halt event was left pending in the CTI, better to clear it immediately after debug entry. Change-Id: I6002f862681baf98769e3c73332a7f7f0ef938c1 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4030 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-03-29nrf51: Remove pointer castAndreas Fritiofson
Int may not be 32 bit long. Change-Id: I420f7efeb484eb35c1d7c20e1575b0b31ed8c9ff Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3930 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-03-06arm_dpm: fix dpm setupGirts Folkmanis
When ARM64 support was being merged, a comparison ended up being inverted. This causes NULL pointer access when target attempts to use core cache. Change-Id: Ic8873ddd13dbdd8100856a71b4717f44cd336e23 Signed-off-by: Girts Folkmanis <opensource@girts.me> Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4042 Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24tcl: add Hi6220 target and LeMaker HiKey board configMatthias Welwarsky
configuration covers all 8 Cortex-A53 cores and auxiliary Cortex-M3 used for power management. Change-Id: I5509f275aa669abe285f9152935ecdcbcd0c402e Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4009 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24armv8_dpm: fix exception handlingMatthias Welwarsky
after handling of an exception in debug state, immediately restore the original core state. Change-Id: Ie53b63c9f19815f717f4df4390fbc13f0a204cc2 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3996 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24armv8_dpm: retrieve only necessary registers on haltMatthias Welwarsky
to speed up debugging, don't load the complete register context on a halt event, load only those registers that might be clobbered during debugging. Change-Id: I0b58e97aad6f28aefce4a52e870af61e1ef1a44f Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3995 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24armv8: spelling and formatting updatesMatthias Welwarsky
small changes to correct code formatting and spelling of some log messages. Change-Id: I645e675f8f9f4731b0271ddc55f64e8cf56ec1db Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3994 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24aarch64: run control reworkMatthias Welwarsky
This patch contains a major overhaul of the target run control, mainly for the sake of satisfying gdbs ideas of how a target should respond to various control requests for the debugger. The changes allow gdb a slightly better control on how cores are stepped: a core can be single-stepped while other cores remain halted or continue normal execution until the single-stepped core halts again. Also, on any halting event (user command or breakpoint) the system is brought into a stable state with all cores halted before the halt is signaled to the debugger. This patch also transitions the target code to make use of the new CTI abstraction instead of accessing CTI registers directly. Change-Id: I8ddc9abb119e04580d671b57ee12240c3f5070a0 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3993 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24aarch64: clean up struct aarch64_commonMatthias Welwarsky
remove some rarely or completely unused components. Change-Id: Id285bb7075901016297fa173a874db7f11a840d7 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3992 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24aarch64: clean up target specific commandsMatthias Welwarsky
- rename "cortex_a" command group to "aarch64" - remove default blank check, checksum and algorithm hooks since they're not going to work in aarch64 mode anyway. Change-Id: Ieb0046786ed9425baf6774c68f42a8285cc2aefd Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3991 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24aarch64: reset fixesMatthias Welwarsky
Make sure all core register caches are invalidated on reset assert, make sure to re-init debug registers on deassert. Change-Id: I82350d04cc3eaae5e35245d13d6c1fb0a8d59807 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3990 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24armv8: factor out generic bit set/clr for debug registersMatthias Welwarsky
introduce armv8_set_dbgreg_bits() function to make register bit-field modifications easier to read. Change-Id: I6b06f66262587fd301d848c9e0645e8327653de7 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3989 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24armv8: load aarch32 register through aarch64 equivalentMatthias Welwarsky
The aarch32 register cache is only a separate view of the aarch64 registers. Load aarch32 registers through their aarch64 equivalents. Change-Id: I3e932dfb782f03d73d30d942b24db340a5749e47 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3988 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24aarch64: remove bogus address check before memory accessMatthias Welwarsky
Mmu faults can not be prevented on aarch64, they need to be taken and handled accordingly. Remove the remaining stub code. Change-Id: I6241efa594fe6b963624f9628cdf1c8e46588223 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3987 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24target: generic ARM CTI function wrapperMatthias Welwarsky
Not specific to ARMv8, the Cross Trigger Interface deserves an independent access wrapper. Change-Id: I84f8faad15ed3515e0fff7f6cc5d1109ef91a869 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3986 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24aarch64: optimize core state detectionMatthias Welwarsky
Replace loop by right-shift. Inspired by patch from Alamy Liu Change-Id: I1285f4f54c0695a93fa42e9863ed8ffa4de00f70 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3985 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24aarch64: reduce debug output to improve legibilityMatthias Welwarsky
Suppress some very verbose LOG_DEBUG's that are not really useful any more. Change-Id: I67f10ba9510a9e34a027f378f4b62b8901ddc8a4 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3984 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24aarch64: remove mrs/msr functions from struct armMatthias Welwarsky
No longer needed, no users. Change-Id: I0cc82a0ef11e1b72101fa9145f014e5d5d76df0e Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3983 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24aarch64: refactor SCTLR manipulationMatthias Welwarsky
Reduce SLOCs in SCTLR retrieval and modification functions and make them less complex. Change-Id: Ida1a99c223743247f171b52eef80dc9886802101 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3982 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-24aarch64: fix software breakpoints when in aarch32 stateMatthias Welwarsky
Use the correct opcode for Aarch32 state, both for the breakpoint instruction itself and the cache handling functions. Change-Id: I975fa67b1e577b54f5c672a01d516419c6a614b2 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/3981 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-15aarch64: Fix #include guardsMarc Schink
Change-Id: I9445b04a210dcde5f8a7cf1560ef23eb53149178 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3975 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-02-13flash/nor: avrf: support atmega128rfa1Karl Palsson
Tested with a Dresden Elektronik deRFmega128 module. Change-Id: I91da3b11b60e78755360b08453ed368d6d396651 Signed-off-by: Karl Palsson <karlp@tweak.net.au> Reviewed-on: http://openocd.zylin.com/2790 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 12:18:22 +0000