aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-11-05CortexA8: Introduce Freescale i.MX51 variantMarek Vasut
This patch introduces support for Cortex A8 based Freescale i.MX51 CPU. This CPU has the Debug Access Port located at a different address (0x60008000) than TI OMAP3 series of CPUs. i.MX51 configuration file based on OMAP3 configuration file and an email from Alan Carvalho de Assis <acassis@gmail.com>. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-11-05CortexA8: Implement debug base autodetectionMarek Vasut
Implement autodetection of debug base. Also, implement a function solving various hardware quirks (like iMX51 ROM Table location bug). Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-11-05ADIv5: Implement function to lookup CoreSight componentMarek Vasut
This patch implements "dap_lookup_cs_component()", which allows to lookup CS component by it's identification. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-11-05ADIv5: Introduce function to detect ROM Table locationMarek Vasut
This patch adds function called "dap_detect_debug_base()", which should be called to get location of the ROM Table. By walking ROM Table, it's possible to discover the location of DAP. Sadly, some CPUs misreport this value, therefore I had to introduce an fixup table, which will be used in case such CPU is detected. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-11-04arm964e: Add support for ARM946E target.ddraskovic
So far most of the people have been using existing ARM966E in the place of ARM946E, because they have practically the same scan chains. However, ARM946E has caches, which further complicates JATG handling via scan-chain. this was preventing single-stepping for ARM946E when SW breakpoints are used. This patch thus introduces : 1) Correct cache handling on memory write 2) Possibility to flush whole cache and turn it off during debug, or just to flush affected lines (faster and better) 3) Correct SW breakpoint handling and correct single-stepping 4) Corrects the bug on CP15 read and write, so CP15 values are now correctly R/W
2010-10-29bootstrap: add quick start build instructionsØyvind Harboe
leave some bread-crumbs for users to figure out how to build OpenOCD Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-29jimtcl: 0.63 releaseØyvind Harboe
as a git module. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-29jim tests: use installedØyvind Harboe
Delete obsolete jim that comes with OpenOCD.
2010-10-28src: add loader src descriptionSpencer Oliver
- add comment where to find the various loaders src files. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-10-28contrib: add ram loader src codeSpencer Oliver
Add src code for ram loaders to contrib directory. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-10-28imx31pdk: use rclk w/1MHz fallbackØyvind Harboe
measure_clk indicates ca. 3-4MHz, so 1MHz should be safe. Added self_test proc used to test that rclk worked. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-27help: help now works on configuration commandsØyvind Harboe
help would not show help for commands when the command interpreter was in the wrong mode, which means that e.g. "help newtap" didn't work, it wouldn't show the "jtag newtap" help as it was a configuration command. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-25Make systesetreq typos read sysresetreq insteadPeter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se>
2010-10-25Remove srst_pulls_trst from LPC1768 targetPeter Stuge
srst_pulls_trst may be true on some (broken) LPC1768 boards but is not true in general for the LPC1768. Signed-off-by: Peter Stuge <peter@stuge.se>
2010-10-25buspirate: change handling of communication speed setting + create serial ↵Michal Demin
port open function Signed-off-by: Michal Demin <michaldemin@gmail.com>
2010-10-25buspirate: Serial port was not correctly closed.Michal Demin
Signed-off-by: Michal Demin <michaldemin@gmail.com>
2010-10-12TARGET: review handle_load_image_command()Antonio Borneo
Collect variable definitions. Report syntax error to command dispatcher. Propagate error when unable to open file. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-10-12TARGET: fix segfault in handle_dump_image_command()Antonio Borneo
The struct fileio is used after fileio_close(). Move fileio_close() after last usage. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-10-10swj-dp.tcl (SWD infrastructure #1)David Brownell
Provide new helper proc that can set up either an SWD or JTAG DAP based on the transport which is in use -- mostly for SWJ-DP. Also update some SWJ-DP based chips/targets to use it. The goal is making SWD-vs-JTAG transparent in most places. SWJ-DP based chips really need this flexible configuration to cope with debug adapters that support different transports, without needing new target configs for each transport or adapter. For JTAG-DP, callers will use "jtag newtap" directly, as today; only one chip-level transport option exists. For SW-DP (e.g. LPC1[13]xx or EFM32, they'll use "swd newdap" directly (part of an upcoming SWD transport patch). Again, only one transport option exists, so hard-wiring is appropriate there. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-10-10add JLINK protocol doc refDavid Brownell
Provide URL for a recent version of JLINK protocol. Signed-Off-By: David Brownell <dbrownell@users.sourceforge.net>
2010-10-05build: remove warn_unused_result errorsSpencer Oliver
Remove any build errors for strtol when building release version of openocd. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-10-05gdbderver: fix gdb pipe startup overflowSpencer Oliver
When usng gdb pipes we need to keep openocd output at a minimum, otherwise the gdb stdin will overflow and fail. Make the calls to gdb_port and log_output synchronous to stop this. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-10-04gdbserver: fix gdb_port memory leakSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-10-04server: fix server pipe windows supportSpencer Oliver
commit 50d5441e2a615fb2c44b41a777e4373901f7a2e6 caused native windows build to fail. Firstly this patch fixes the build issue, but it also disables support for named pipes under Windows. Windows does not support posix named pipes. A cross-platfom access layer will need creating before support can be enabled again. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-10-01zy1000: add : port number syntax for tftp filing systemØyvind Harboe
Allows using non-standard port number. Default to port 69. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-01pipes: add documentation for pipesØyvind Harboe
Stick with the name "gdb_port" even if this command can be used for other things(disable, named pipes, anonymous stdin/out pipe). "port" is correct for probably more than 90% of use cases, if not more. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-01server: add support for pipesØyvind Harboe
-p/--pipe is now deprecated. Use '-c "gdb_port pipe;log_output openocd.log"' instead. Warning logged. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-01server: specify port as a stringØyvind Harboe
This will allow switching to using named pipes. Split this out as a seperate commit to make changes easier to follow. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-01server: read/write now goes through connection fn'sØyvind Harboe
depending on whether the connection is over a socket or pipe, the read is done differently. pipes can return -1 when writing 0 bytes, make 0 byte writes a successful no-op. 0 byte writes falls out naturally of tcl server code. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-01server: split file descriptors in in/out fd'sØyvind Harboe
pipes have different fd's for in/out. This makes the code more orthogonal and prepares for adding pipes. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-01server: rely on ctrl-c to stop openocdØyvind Harboe
there was special support to support pressing 'x' to quit openocd. ctrl-c is sufficient. The main server loop is already complicated enough. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-01log: remove hack to redirect logs when pipes are in useØyvind Harboe
There is an explicit command "log_output" that can be used to redirect log output to a file, no need for a hack in the first place. Before enabling pipes, use "log_output foo" to redirect log output to the "foo" files. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-30Update ep93xx and at91rm9200 driversLuca Bruno
ep93xx and at91rm9200 are conditionally built only on arm and were not updated to reflect changes in command registration handler. This patch makes them properly compile again, fixing a build failure experienced on Debian armel. Signed-off-by: Luca Bruno <lucab@debian.org> Signed-off-by: Zachary T Welch <zwelch@codesourcery.com>
2010-09-29fileio: fileio_size() can now failØyvind Harboe
Part of making the fileio API more robust. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-29fileio: refactor struct fileio to be an opaque structureØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-28TCL scripts: fix ocd_mem2array/mem2arrayAntonio Borneo
In previous patch, I have introduced again the symbol "ocd_mem2array", now replaced by "mem2array". Fix the error. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-09-27flash: fix error handlingØyvind Harboe
memory leaks and missing check on memory allocation. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-27image: fix spelling mistakeØyvind Harboe
struct imageection => struct imagesection Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-26Fix omap3_dbginit to write to physical memory.Zachary T Welch
Setting the OMAP3530 DBGEN bit must be done in physical memory, so update omap3_dbginit callback to use the new 'mww phys' command syntax.
2010-09-26zy1000: fix non-JTAG master buildØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-26gdb: fix blank line at topØyvind Harboe
snuck in at some point... Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-21jtagdp: remove #if 0'd kludges and explain why the code is correctØyvind Harboe
short story: if the JTAG clock is too high, then the behavior will be flaky and kludging the code may seem to make things beter, but really it's just a red herring. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-21flash: fix error handlingØyvind Harboe
sensible error must be reported at failure site Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-21embeddedice: fix error handlingØyvind Harboe
error is now reported at failure site. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-21TCL scripts: collect duplicated proceduresAntonio Borneo
TCL procedures mrw and mmw, originally in DaVinci target code, are duplicated in other TCL scripts. Moved in a common helper file, and added help/usage description. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-09-20startup: removed capture_catchØyvind Harboe
not used. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-20helper: fix flaky capture commandØyvind Harboe
capture of progress output would get polling results. This will break in the example below where polling output would override the tcl return value. capture {sleep 10000; set abc def} Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-20tcl_server: switch to ctrl-zØyvind Harboe
by using ctrl-z instead of line end, multi-line tcl scripts can be handled. Testing: send ctrl-z a couple of times to make telnet enter the mode where it sends ctrl-z unencoded. Programs that talk to the tcl_server can send ctrl-z to indicate end of tcl-let to be executed without having to worry about telnet protocols. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-20logging: turn of stdout/stderr bufferingØyvind Harboe
with this buffering disabled fancier logging scripts will be able to process each line as it is output. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-20zy1000: add support for Linux hostØyvind Harboe
used /dev/mem and mmem() to memory map JTAG registers into user space and used new configure options to exclude eCos specific code. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 11:38:06 +0000