aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-31mips: mips32_pracc_exec error propagation fixesØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-31mips: mips_ejtag_get_impcode error propagation addedØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-31mips: fix mips_ejtag_set_instr error handlingØyvind Harboe
this fn does not fail, it queues data. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-31mips: fix error handling for jtag_execute_queue()Øyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-31xscale: fix gaffe in phys writeØyvind Harboe
it would *read* instead of *write* to memory when the MMU was disabled. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-31cortex-a: use -dbgbase optionØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-31target: add -dbgbase option to target configurationØyvind Harboe
Really a Cortex-A specific option, but there is no system in place to support target specific options currently and there has been no need for such a system until now. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-30at91sam3: Modified cidr comparisson to ignore version bitsOlivier Schonken
production processor versions increment, thus the version bits should be ignored for future proofing. e.g. Engineering sample version == 0x00, production version 0x01
2011-03-30docs: add HACKING file to help users get started with patchesØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-30Clarify LPC32XX address cycles messageAlexandre Pereira da Silva
Hi, This is a more descriptive message about LPC32XX error, when the nand chip needs 5 address cycles. Thanks.
2011-03-30Add Micron 2GiB nandAlexandre Pereira da Silva
Hi, This will add support for a new nand chip device. Thanks.
2011-03-29bugfix for step <address> mips_m4kAndrew Lyon
The patch below fixes step <address> on mips_m4k. Spencer Oliver <spen@spen-soft.co.uk>: The current code is used on all other arch's - is there a underlying issue with those aswell ?
2011-03-27command: fix leak when executing commandsØyvind Harboe
found via valgrind, not observed/reported. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-22cortex_a: rename cortex_a8.c/h to cortex_a.c/hØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-22omap4430: tried to add in workaround for broken dbgbase queryØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-22cortex a9: merge cortex a9 and a8 codeØyvind Harboe
better to keep this in a single file. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-22omap4430: cortex a9 and a8 are now merged againØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-21zy1000: fix bug in ir scan handlingØyvind Harboe
set cur_instr to BYPASS as optimisation code will rely on checking the cached value. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-21zy1000: removed JTAG master TCP/IP serverØyvind Harboe
Move ZY1000 OpenOCD driver more in the direction of being a client to simplify code. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-20dsp563xx_once: fix warning and potential bugØyvind Harboe
I don't think dsp563xx_once_read_register() would ever be called with len==0, but it would have been broken in that case. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-18zy1000: add code to check that SRST assertsØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-17target: allow targets to override memory alignmentMathias K
Targets can implement read/write_buffer to handle alignment.
2011-03-17SYS_WRITE0 fixJohn and Tina Peterson
Problem is, trying to print "Hello, world!\n" just prints endless H's, because r1 is never incremented. One way to fix it would be to add a "++" after "r1".
2011-03-17Fix a bunch of typos.Uwe Hermann
Fix a bunch of typos. Most are in code comments, so nothing should break. UNKOWN_COMMAND and CMD_UNKOWN are not used elsewhere, so correcting the spelling should also not break anything.
2011-03-15dsp563xx: fix alignment warningsØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-15dsp563xx: fix bug in x buffer handlingØyvind Harboe
found by inspection. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-15zy1000: switch to pthreadØyvind Harboe
pthreads work under Linux and eCos. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-15zy1000: fix JTAG over TCP/IP performance problemØyvind Harboe
only flush write queue just before waiting for more data, rather than when fetching more data from the buffer. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-15zy1000: fix incorrect usage of jtag_sleep()Øyvind Harboe
Found by inspection: the correct thing in the context is to use usleep() rather than jtag_sleep(). Relates to JTAG over TCP/IP only. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-15jtag: clean up jtag_sleep, handle short sleeps correctly via usleepØyvind Harboe
short sleeps are handled via usleep, longer sleeps we round up to nearest ms. There was a bug in jtag_sleep() in that it would round *down* to nearest ms, thus making all <1ms sleeps 0. Found by inspection rather than symptom. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-15zy1000: reduce memory usage for fw upgrade fnØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-13omap4430: add Blaze configAaron Carroll
Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
2011-03-13omap4430: force hardware breakpoints for GDBAaron Carroll
Soft breakpoints are currently broken if the MMU is enabled due to incorrect cache flushing. Until this is fixed, force the use of hardware breakpoints. Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
2011-03-13jlink: add Emulator configuration supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13jlink: add detect hw typeJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13jlink: use tap buffer as 2kJean-Christophe PLAGNIOL-VILLARD
as said in the datasheet Section 3.3.2 Organization of buffers All buffers are big enough to hold 2 KByte of data. this will double the speed of download Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13jlink: add capability dumper and commandJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03ft2232: fix log message and change log output to debugMathias K
2011-03-03at91: add at91sam9g45 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91: add at91sam9g10 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91sam9260: update sram informationJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91: add at91sam9263 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91: add at91sam9261 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91sam9: factorise cpu supportJean-Christophe PLAGNIOL-VILLARD
all at91sam9 are nearly the same except sram and soc name Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-02jlink: add jlink_pid to specify the pid to useJean-Christophe PLAGNIOL-VILLARD
this will allow us to use multiple jlink at the same time as when the USB-Address is specified the PID change from 0x0101 to (0x101 + usb_adress) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-03-02jlink: switch commands to subcommandsJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-03-02jlink: harmonise the device name to J-LinkJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-03-02jlink: add new PID and VIDJean-Christophe PLAGNIOL-VILLARD
The default pid of the segger is 0x0101 But when you change the USB Address it will also pid = ( usb_address > 0x4) ? 0x0101 : (0x101 + usb_address) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-02-28svf: add nil option that just runs through the svf fileØyvind Harboe
useful for debugging without access to hardware to e.g. regression test, reproduce memory corruption problems, etc. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-02-25log: debug level is between silent and debug output levelsØyvind Harboe
It wasn't previously possible to silence the output. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-18 11:25:05 +0000