diff options
Diffstat (limited to 'tcl/target')
-rw-r--r-- | tcl/target/m051.cfg | 61 | ||||
-rw-r--r-- | tcl/target/numicro.cfg | 60 |
2 files changed, 60 insertions, 61 deletions
diff --git a/tcl/target/m051.cfg b/tcl/target/m051.cfg deleted file mode 100644 index d0655947..00000000 --- a/tcl/target/m051.cfg +++ /dev/null @@ -1,61 +0,0 @@ -# script for nuvoton M051 family - -transport select hla_swd - -source [find target/swj-dp.tcl] - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME m051 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# Work-area is a space in RAM used for flash programming -# By default use 4kB -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x1000 -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - # See STM Document RM0091 - # Section 29.5.3 - set _CPUTAPID 0x0bb11477 -} - -swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME - -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - -# flash size will be probed -set _FLASHNAME $_CHIPNAME.flash_aprom -flash bank $_FLASHNAME mini51 0x00000000 0x4000 0 0 $_TARGETNAME -set _FLASHNAME $_CHIPNAME.flash_data -flash bank $_FLASHNAME mini51 0x0001F000 0x1000 0 0 $_TARGETNAME -set _FLASHNAME $_CHIPNAME.flash_ldrom -flash bank $_FLASHNAME mini51 0x00100000 0x1000 0 0 $_TARGETNAME -set _FLASHNAME $_CHIPNAME.flash_conf -flash bank $_FLASHNAME mini51 0x00300000 0x0100 0 0 $_TARGETNAME - -# adapter speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz -adapter_khz 1000 - -adapter_nsrst_delay 100 - -if {![using_hla]} { - # if srst is not fitted use SYSRESETREQ to - # perform a soft reset - cortex_m reset_config sysresetreq -} diff --git a/tcl/target/numicro.cfg b/tcl/target/numicro.cfg new file mode 100644 index 00000000..13d96543 --- /dev/null +++ b/tcl/target/numicro.cfg @@ -0,0 +1,60 @@ +# script for Nuvoton MuMicro Cortex-M0 Series + +# Adapt based on what transport is active. +source [find target/swj-dp.tcl] + +# Set Chipname +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME NuMicro +} + +# SWD DP-ID Nuvoton NuMicro Cortex-M0 has SWD Transport only. +if { [info exists CPUDAPID] } { + set _CPUDAPID $CPUDAPID +} else { + set _CPUDAPID 0x0BB11477 +} + +# Work-area is a space in RAM used for flash programming +# By default use 2kB +if { [info exists WORKAREASIZE] } { + set _WORKAREASIZE $WORKAREASIZE +} else { + set _WORKAREASIZE 0x800 +} + + +# Debug Adapter Target Settings +swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUDAPID +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME + +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 + +# flash bank <name> numicro <base> <size(autodetect,set to 0)> 0 0 <target#> +#set _FLASHNAME $_CHIPNAME.flash +#flash bank $_FLASHNAME numicro 0 $_FLASHSIZE 0 0 $_TARGETNAME +# flash size will be probed +set _FLASHNAME $_CHIPNAME.flash_aprom +flash bank $_FLASHNAME numicro 0x00000000 0 0 0 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash_data +flash bank $_FLASHNAME numicro 0x0001F000 0 0 0 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash_ldrom +flash bank $_FLASHNAME numicro 0x00100000 0 0 0 $_TARGETNAME +set _FLASHNAME $_CHIPNAME.flash_config +flash bank $_FLASHNAME numicro 0x00300000 0 0 0 $_TARGETNAME + +# set default SWCLK frequency +adapter_khz 1000 + +# set default srst setting "none" +reset_config none + +# HLA doesn't have cortex_m commands +if {![using_hla]} { + # if srst is not fitted use SYSRESETREQ to + # perform a soft reset + cortex_m reset_config sysresetreq +} |