diff options
Diffstat (limited to 'tcl/target/stm32lx_stlink.cfg')
| -rw-r--r-- | tcl/target/stm32lx_stlink.cfg | 49 |
1 files changed, 2 insertions, 47 deletions
diff --git a/tcl/target/stm32lx_stlink.cfg b/tcl/target/stm32lx_stlink.cfg index 0bd59b4a..58353485 100644 --- a/tcl/target/stm32lx_stlink.cfg +++ b/tcl/target/stm32lx_stlink.cfg @@ -1,47 +1,2 @@ -# -# STM32lx stlink pseudo target -# - -if { [info exists CHIPNAME] == 0 } { - set CHIPNAME stm32lx -} - -if { [info exists CPUTAPID] == 0 } { - set CPUTAPID 0x2ba01477 -} - -if { [info exists WORKAREASIZE] == 0 } { - set WORKAREASIZE 0x2800 -} - -source [find target/stm32_stlink.cfg] - -# Flash base address is known by driver. Flash size will be probed. -# -# Please note that the larger stm32lx targets (256Kb and 384Kb) uses dual -# bank flash. For such targets use target/stm32lx_dual_bank.cfg. -# -# Some samples of ST's stm32lx chips are known to have incorrect flash size -# values programmed in their FLASH_SIZE register. The driver will warn -# for strange values. It is possible to override the flash size probe by -# defining the correct size here. Notice though that it is the size of -# the flash bank -# -# flash bank stm32lx <base> <size> 0 0 <target#> <variant> -set _FLASHNAME $_CHIPNAME.flash -flash bank $_FLASHNAME stm32lx 0 0 0 0 $_TARGETNAME - -proc stm32l_enable_HSI {} { - # Enable HSI as clock source - echo "STM32L: Enabling HSI" - - # Set HSION in RCC_CR - mww 0x40023800 0x00000101 - - # Set HSI as SYSCLK - mww 0x40023808 0x00000001 -} - -$_TARGETNAME configure -event reset-init { - stm32l_enable_HSI -} +echo "WARNING: target/stm32lx_stlink.cfg is deprecated, please switch to target/stm32l.cfg" +source [find target/stm32l.cfg] |