1 files changed, 60 insertions, 0 deletions
diff --git a/tcl/target/numicro.cfg b/tcl/target/numicro.cfg
new file mode 100644
index 00000000..13d96543
--- /dev/null
+++ b/tcl/target/numicro.cfg
@@ -0,0 +1,60 @@
+# script for Nuvoton MuMicro Cortex-M0 Series
+
+# Adapt based on what transport is active.
+source [find target/swj-dp.tcl]
+
+# Set Chipname
+if { [info exists CHIPNAME] } {
+	set _CHIPNAME $CHIPNAME
+} else {
+	set _CHIPNAME NuMicro
+}
+
+# SWD DP-ID Nuvoton NuMicro Cortex-M0 has SWD Transport only.
+if { [info exists CPUDAPID] } {
+	set _CPUDAPID $CPUDAPID
+} else {
+	set _CPUDAPID 0x0BB11477
+}
+
+# Work-area is a space in RAM used for flash programming
+# By default use 2kB
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x800
+}
+
+
+# Debug Adapter Target Settings
+swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUDAPID
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+# flash bank <name> numicro <base> <size(autodetect,set to 0)> 0 0 <target#>
+#set _FLASHNAME $_CHIPNAME.flash
+#flash bank $_FLASHNAME numicro 0 $_FLASHSIZE 0 0 $_TARGETNAME
+# flash size will be probed
+set _FLASHNAME $_CHIPNAME.flash_aprom
+flash bank $_FLASHNAME numicro 0x00000000 0 0 0 $_TARGETNAME
+set _FLASHNAME $_CHIPNAME.flash_data
+flash bank $_FLASHNAME numicro 0x0001F000 0 0 0 $_TARGETNAME
+set _FLASHNAME $_CHIPNAME.flash_ldrom
+flash bank $_FLASHNAME numicro 0x00100000 0 0 0 $_TARGETNAME
+set _FLASHNAME $_CHIPNAME.flash_config
+flash bank $_FLASHNAME numicro 0x00300000 0 0 0 $_TARGETNAME
+
+# set default SWCLK frequency
+adapter_khz 1000
+
+# set default srst setting "none"
+reset_config none
+
+# HLA doesn't have cortex_m commands
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to
+   # perform a soft reset
+   cortex_m reset_config sysresetreq
+}