diff options
Diffstat (limited to 'tcl/target/m051.cfg')
-rw-r--r-- | tcl/target/m051.cfg | 61 |
1 files changed, 0 insertions, 61 deletions
diff --git a/tcl/target/m051.cfg b/tcl/target/m051.cfg deleted file mode 100644 index d0655947..00000000 --- a/tcl/target/m051.cfg +++ /dev/null @@ -1,61 +0,0 @@ -# script for nuvoton M051 family - -transport select hla_swd - -source [find target/swj-dp.tcl] - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME m051 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# Work-area is a space in RAM used for flash programming -# By default use 4kB -if { [info exists WORKAREASIZE] } { - set _WORKAREASIZE $WORKAREASIZE -} else { - set _WORKAREASIZE 0x1000 -} - -if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID -} else { - # See STM Document RM0091 - # Section 29.5.3 - set _CPUTAPID 0x0bb11477 -} - -swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME - -$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 - -# flash size will be probed -set _FLASHNAME $_CHIPNAME.flash_aprom -flash bank $_FLASHNAME mini51 0x00000000 0x4000 0 0 $_TARGETNAME -set _FLASHNAME $_CHIPNAME.flash_data -flash bank $_FLASHNAME mini51 0x0001F000 0x1000 0 0 $_TARGETNAME -set _FLASHNAME $_CHIPNAME.flash_ldrom -flash bank $_FLASHNAME mini51 0x00100000 0x1000 0 0 $_TARGETNAME -set _FLASHNAME $_CHIPNAME.flash_conf -flash bank $_FLASHNAME mini51 0x00300000 0x0100 0 0 $_TARGETNAME - -# adapter speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz -adapter_khz 1000 - -adapter_nsrst_delay 100 - -if {![using_hla]} { - # if srst is not fitted use SYSRESETREQ to - # perform a soft reset - cortex_m reset_config sysresetreq -} |