1 files changed, 0 insertions, 61 deletions
diff --git a/tcl/target/m051.cfg b/tcl/target/m051.cfg
deleted file mode 100644
index d0655947..00000000
--- a/tcl/target/m051.cfg
+++ /dev/null
@@ -1,61 +0,0 @@
-# script for nuvoton M051 family
-
-transport select hla_swd
-
-source [find target/swj-dp.tcl]
-
-if { [info exists CHIPNAME] } {
-   set _CHIPNAME $CHIPNAME
-} else {
-   set _CHIPNAME m051
-}
-
-if { [info exists ENDIAN] } {
-   set _ENDIAN $ENDIAN
-} else {
-   set _ENDIAN little
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 4kB
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x1000
-}
-
-if { [info exists CPUTAPID] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-  # See STM Document RM0091
-  # Section 29.5.3
-   set _CPUTAPID 0x0bb11477
-}
-
-swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-# flash size will be probed
-set _FLASHNAME $_CHIPNAME.flash_aprom
-flash bank $_FLASHNAME mini51 0x00000000 0x4000 0 0 $_TARGETNAME
-set _FLASHNAME $_CHIPNAME.flash_data
-flash bank $_FLASHNAME mini51 0x0001F000 0x1000 0 0 $_TARGETNAME
-set _FLASHNAME $_CHIPNAME.flash_ldrom
-flash bank $_FLASHNAME mini51 0x00100000 0x1000 0 0 $_TARGETNAME
-set _FLASHNAME $_CHIPNAME.flash_conf
-flash bank $_FLASHNAME mini51 0x00300000 0x0100 0 0 $_TARGETNAME
-
-# adapter speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
-adapter_khz 1000
-
-adapter_nsrst_delay 100
-
-if {![using_hla]} {
-   # if srst is not fitted use SYSRESETREQ to
-   # perform a soft reset
-   cortex_m reset_config sysresetreq
-}