diff options
Diffstat (limited to 'tcl/target/kl25.cfg')
-rw-r--r-- | tcl/target/kl25.cfg | 48 |
1 files changed, 48 insertions, 0 deletions
diff --git a/tcl/target/kl25.cfg b/tcl/target/kl25.cfg new file mode 100644 index 00000000..c5dda151 --- /dev/null +++ b/tcl/target/kl25.cfg @@ -0,0 +1,48 @@ +# +# Freescale Kinetis KL25 devices +# + +# +# KL25 devices support both JTAG and SWD transports. +# +source [find target/swj-dp.tcl] + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME kl25 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +# Work-area is a space in RAM used for flash programming +# By default use 4kB +if { [info exists WORKAREASIZE] } { + set _WORKAREASIZE $WORKAREASIZE +} else { + set _WORKAREASIZE 0x1000 +} + +if { [info exists CPUTAPID] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x0bc11477 +} + +swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_CHIPNAME.cpu + +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 + +set _FLASHNAME $_CHIPNAME.flash +flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME + +# if srst is not fitted use SYSRESETREQ to +# perform a soft reset +cortex_m reset_config sysresetreq |