diff options
Diffstat (limited to 'tcl/target/fm3.cfg')
-rw-r--r-- | tcl/target/fm3.cfg | 16 |
1 files changed, 11 insertions, 5 deletions
diff --git a/tcl/target/fm3.cfg b/tcl/target/fm3.cfg index 74a4e278..e2d78d1e 100644 --- a/tcl/target/fm3.cfg +++ b/tcl/target/fm3.cfg @@ -1,6 +1,8 @@ # MB9BF506 # Fujitsu Cortex-M3 with 512kB Flash and 64kB RAM +source [find target/swj-dp.tcl] + if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { @@ -21,12 +23,14 @@ if { [info exists CPUTAPID] } { # delays on reset lines adapter_nsrst_delay 100 -jtag_ntrst_delay 100 +if {[using_jtag]} { + jtag_ntrst_delay 100 +} # Fujitsu cortex-M3 reset configuration reset_config trst_only -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID +swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME @@ -42,6 +46,8 @@ flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME # 4MHz / 6 = 666kHz, so use 500 adapter_khz 500 -# if srst is not fitted use SYSRESETREQ to -# perform a soft reset -cortex_m reset_config sysresetreq +if {![using_hla]} { + # if srst is not fitted use SYSRESETREQ to + # perform a soft reset + cortex_m reset_config sysresetreq +} |