diff options
Diffstat (limited to 'tcl/target/at91samdXX.cfg')
-rw-r--r-- | tcl/target/at91samdXX.cfg | 12 |
1 files changed, 5 insertions, 7 deletions
diff --git a/tcl/target/at91samdXX.cfg b/tcl/target/at91samdXX.cfg index 072459df..fb3be04a 100644 --- a/tcl/target/at91samdXX.cfg +++ b/tcl/target/at91samdXX.cfg @@ -40,10 +40,6 @@ target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAM $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 -$_TARGETNAME configure -event gdb-flash-erase-start { - halt -} - # JTAG speed should be <= F_CPU/6. F_CPU after reset is 4 MHz, so use F_JTAG = 0.5MHz # # Since we may be running of an RC oscilator, we crank down the speed a @@ -54,9 +50,11 @@ $_TARGETNAME configure -event gdb-flash-erase-start { adapter_khz 500 adapter_nsrst_delay 100 -# if srst is not fitted use SYSRESETREQ to -# perform a soft reset -cortex_m reset_config sysresetreq +if {![using_hla]} { + # if srst is not fitted use SYSRESETREQ to + # perform a soft reset + cortex_m reset_config sysresetreq +} set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME at91samd 0x00000000 0 1 1 $_TARGETNAME |