diff options
Diffstat (limited to 'tcl/board')
| -rw-r--r-- | tcl/board/tx27_stk5.cfg | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/tcl/board/tx27_stk5.cfg b/tcl/board/tx27_stk5.cfg new file mode 100644 index 00000000..962788cb --- /dev/null +++ b/tcl/board/tx27_stk5.cfg @@ -0,0 +1,64 @@ +# KaRo TX27 CPU Module on a StarterkitV base board +# +# http://www.karo-electronics.com/tx27.html +# +source [find target/imx27.cfg] + +$_TARGETNAME configure -event gdb-attach { reset init } +$_TARGETNAME configure -event reset-init { tx27_init } + +proc tx27_init { } { + # This setup puts RAM at 0xA0000000 + # init_aipi (AIPI1.PSR0, AIPI2.PSR0, AIPI1.PSR1 and AIPI2.PSR1) + mww 0x10000000 0x20040304 + mww 0x10020000 0x00000000 + mww 0x10000004 0xDFFBFCFB + mww 0x10020004 0xFFFFFFFF + + sleep 100 + + #init_max ( PORT0.MPR, #PORT0.AMPR, #PORT1.MPR, #PORT1.AMPR, #PORT2.MPR, #PORT2.AMPR) + mww 0x1003F000 0x00302145 + mww 0x1003F004 0x00302145 + mww 0x1003F100 0x00302145 + mww 0x1003F104 0x00302145 + mww 0x1003F200 0x00302145 + mww 0x1003F204 0x00302145 + + #init_drive_strength (#DSCR3, #DSCR5, #DSCR6, #DSCR7, #DSCR8 ) + mww 0x10027828 0x55555555 + mww 0x10027830 0x55555555 + mww 0x10027834 0x55555555 + mww 0x10027838 0x00005005 + mww 0x1002783C 0x15555555 + + #init_sdram_speed + #mww 0xD8001010 0x00000004 + mww 0xD8001010 0x00000024 + + mww 0xD8001004 0x00395729 + + mww 0xD8001000 0x92120000 + mww 0xA0000400 0x0 + + mww 0xD8001000 0xA2120000 + mww 0xA0000000 0x0 + mww 0xA0000000 0x0 + + mww 0xD8001000 0xB2120000 + mdb 0xA0000000 + mdb 0xA0000033 + + mww 0xD8001000 0x82126485 + + # ============================================= + # Sync mode (AHB Clk = 133MHz ; BCLK = 44.3MHz) + # ============================================= + mww 0xD8002000 0x23524E80 + mww 0xD8002004 0x10000D03 + mww 0xD8002008 0x00720900 + + nand probe 0 +} + +nand device tx27.nand imx27 $_TARGETNAME hwecc |