diff options
Diffstat (limited to 'tcl/board/x300t.cfg')
-rw-r--r-- | tcl/board/x300t.cfg | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/tcl/board/x300t.cfg b/tcl/board/x300t.cfg new file mode 100644 index 00000000..985f44ed --- /dev/null +++ b/tcl/board/x300t.cfg @@ -0,0 +1,30 @@ +# This is for the T-Home X300T / X301T IPTV box, +# which are based on IPTV reference designs from Kiss/Cisco KMM-3*** +# +# It has Sigma Designs SMP8634 chip. +source [find target/smp8634.cfg] + +$_TARGETNAME configure -event reset-init { x300t_init } + +# 1MB CFI capable flash +# flash bank <driver> <base> <size> <chip_width> <bus_width> +flash bank cfi 0xac000000 0x100000 2 2 0 + +proc x300t_init { } { + # Setup SDRAM config and flash mapping + # initialize ram + mww 0xa003fffc 3 + mww 0xa003fffc 2 + mww 0xa0030000 0xE34111BA + mww 0xa003fffc 0xa4444 + mww 0xa003fffc 0 + + # remap boot vector in CPU local RAM + mww 0xa006f000 0x60000 + + # map flash to CPU address space REG_BASE_cpu_block+CPU_remap4 + mww 0x0006f010 0x48000000 + + # map flash addr to REG_BASE_cpu_block + LR_XENV_LOCATION (normally done by XOS) + mww 0x00061ff0 0x48000000 +} |