diff options
Diffstat (limited to 'tcl/board/ti_beaglebone.cfg')
-rw-r--r-- | tcl/board/ti_beaglebone.cfg | 80 |
1 files changed, 6 insertions, 74 deletions
diff --git a/tcl/board/ti_beaglebone.cfg b/tcl/board/ti_beaglebone.cfg index dffb07f8..be4da201 100644 --- a/tcl/board/ti_beaglebone.cfg +++ b/tcl/board/ti_beaglebone.cfg @@ -1,3 +1,7 @@ +# AM335x Beaglebone +# http://beagleboard.org/bone + +# The JTAG interface is built directly on the board. interface ft2232 #ft2232_device_desc "BeagleBone A" ft2232_layout xds100v2 @@ -5,80 +9,8 @@ ft2232_vid_pid 0x0403 0xa6d0 adapter_khz 16000 -reset_config trst_and_srst - - - - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME am335x -} - -proc icepick_d_tapenable {jrc port} { - # select router - irscan $jrc 7 -endstate IRPAUSE - drscan $jrc 8 0x89 -endstate DRPAUSE - - # set ip control - irscan $jrc 2 -endstate IRPAUSE - drscan $jrc 32 [expr 0xa0002108 + ($port << 24)] -endstate DRPAUSE +source [find target/am335x.cfg] - # for icepick_D - irscan $jrc 2 -endstate IRPAUSE - drscan $jrc 32 0xe0002008 -endstate DRPAUSE - - irscan $jrc 0x3F -endstate RUN/IDLE - runtest 10 -} - -# -# M3 DAP -# -if { [info exists M3_DAP_TAPID] } { - set _M3_DAP_TAPID $M3_DAP_TAPID -} else { - set _M3_DAP_TAPID 0x4b6b902f -} -jtag newtap $_CHIPNAME m3_dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_M3_DAP_TAPID -disable -jtag configure $_CHIPNAME.m3_dap -event tap-enable "icepick_d_tapenable $_CHIPNAME.jrc 11" - -# -# Main DAP -# -if { [info exists DAP_TAPID ] } { - set _DAP_TAPID $DAP_TAPID -} else { - set _DAP_TAPID 0x4b6b902f -} -jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable -jtag configure $_CHIPNAME.dap -event tap-enable "icepick_d_tapenable $_CHIPNAME.jrc 12" - -# -# ICEpick-D (JTAG route controller) -# -if { [info exists JRC_TAPID ] } { - set _JRC_TAPID $JRC_TAPID -} else { - set _JRC_TAPID 0x0b94402f -} -jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f -expected-id $_JRC_TAPID -jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap" -# some TCK tycles are required to activate the DEBUG power domain -jtag configure $_CHIPNAME.jrc -event post-reset "runtest 100" - -# -# Cortex A8 target -# -set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.dap -dbgbase 0x80001000 - -# SRAM: 64K at 0x4030.0000; use the first 16K -$_TARGETNAME configure -work-area-phys 0x40300000 -work-area-size 0x4000 +reset_config trst_and_srst -$_TARGETNAME configure -event gdb-attach { - cortex_a8 dbginit - halt -} |