diff options
Diffstat (limited to 'tcl/board/spear300evb.cfg')
-rw-r--r-- | tcl/board/spear300evb.cfg | 44 |
1 files changed, 44 insertions, 0 deletions
diff --git a/tcl/board/spear300evb.cfg b/tcl/board/spear300evb.cfg new file mode 100644 index 00000000..9f957038 --- /dev/null +++ b/tcl/board/spear300evb.cfg @@ -0,0 +1,44 @@ +# Configuration for the ST SPEAr300 Evaluation board +# EVALSPEAr300 Rev. 1.0 +# http://www.st.com/spear +# +# Date: 2010-11-27 +# Author: Antonio Borneo <borneo.antonio@gmail.com> + +# The standard board has JTAG SRST not connected. +# This script targets such boards using quirky code to bypass the issue. + + +source [find mem_helper.tcl] +source [find target/spear3xx.cfg] +source [find chip/st/spear/spear3xx_ddr.tcl] +source [find chip/st/spear/spear3xx.tcl] + +arm7_9 dcc_downloads enable +arm7_9 fast_memory_access enable + + +# Serial NOR on SMI CS0. 8Mbyte. +set _FLASHNAME1 $_CHIPNAME.snor +flash bank $_FLASHNAME1 stmsmi 0xf8000000 0 0 0 $_TARGETNAME + +if { [info exists BOARD_HAS_SRST] } { + # Modified board has SRST on JTAG connector + reset_config trst_and_srst separate srst_gates_jtag \ + trst_push_pull srst_open_drain +} else { + # Standard board has no SRST on JTAG connector + reset_config trst_only separate srst_gates_jtag trst_push_pull + source [find chip/st/spear/quirk_no_srst.tcl] +} + +$_TARGETNAME configure -event reset-init { spear300evb_init } + +proc spear300evb_init {} { + reg pc 0xffff0020; # loop forever + + sp3xx_clock_default + sp3xx_common_init + sp3xx_ddr_init "mt47h64m16_3_333_cl5_async" + sp300_init +} |