diff options
Diffstat (limited to 'src/tcl/board/crossbow_tech_imote2.cfg')
-rw-r--r-- | src/tcl/board/crossbow_tech_imote2.cfg | 46 |
1 files changed, 0 insertions, 46 deletions
diff --git a/src/tcl/board/crossbow_tech_imote2.cfg b/src/tcl/board/crossbow_tech_imote2.cfg deleted file mode 100644 index 7527bef8..00000000 --- a/src/tcl/board/crossbow_tech_imote2.cfg +++ /dev/null @@ -1,46 +0,0 @@ -# Crossbow Technology iMote2 - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME imote2 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - # force an error till we get a good number - set _CPUTAPID 0xffffffff -} - -# PXA271 and an Intel Strataflash of 32 Megabytes (p30) -# -# Marvell/Intel PXA270 Script -# set jtag_nsrst_delay to the delay introduced by your reset circuit -# the rest of the needed delays are built into the openocd program -jtag_nsrst_delay 800 -# set the jtag_ntrst_delay to the delay introduced by a reset circuit -# the rest of the needed delays are built into the openocd program -jtag_ntrst_delay 0 -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config trst_and_srst separate -#jtag scan chain - -jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID - -set _TARGETNAME [format "%s.cpu" $_CHIPNAME] -target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x -$_TARGETNAME configure -work-area-virt 0x0x5c000000 -work-area-phys 0x0x5c000000 -work-area-size 0x10000 -work-area-backup 1 -# maps to PXA internal RAM. If you are using a PXA255 -# you must initialize SDRAM or leave this option off - - -#flash bank <driver> <base> <size> <chip_width> <bus_width> -# works for P30 flash -flash bank cfi 0x00000000 0x2000000 2 2 0 |