diff options
Diffstat (limited to 'src/target/target.c')
| -rw-r--r-- | src/target/target.c | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/src/target/target.c b/src/target/target.c index 5b37ef03..51518e68 100644 --- a/src/target/target.c +++ b/src/target/target.c @@ -796,6 +796,137 @@ done: return retval; } +/** + * Executes a target-specific native code algorithm in the target. + * It differs from target_run_algorithm in that the algorithm is asynchronous. + * Because of this it requires an compliant algorithm: + * see contrib/loaders/flash/stm32f1x.S for example. + * + * @param target used to run the algorithm + */ + +int target_run_flash_async_algorithm(struct target *target, + uint8_t *buffer, uint32_t count, int block_size, + int num_mem_params, struct mem_param *mem_params, + int num_reg_params, struct reg_param *reg_params, + uint32_t buffer_start, uint32_t buffer_size, + uint32_t entry_point, uint32_t exit_point, void *arch_info) +{ + int retval; + + /* Set up working area. First word is write pointer, second word is read pointer, + * rest is fifo data area. */ + uint32_t wp_addr = buffer_start; + uint32_t rp_addr = buffer_start + 4; + uint32_t fifo_start_addr = buffer_start + 8; + uint32_t fifo_end_addr = buffer_start + buffer_size; + + uint32_t wp = fifo_start_addr; + uint32_t rp = fifo_start_addr; + + /* validate block_size is 2^n */ + assert(!block_size || !(block_size & (block_size - 1))); + + retval = target_write_u32(target, wp_addr, wp); + if (retval != ERROR_OK) + return retval; + retval = target_write_u32(target, rp_addr, rp); + if (retval != ERROR_OK) + return retval; + + /* Start up algorithm on target and let it idle while writing the first chunk */ + retval = target_start_algorithm(target, num_mem_params, mem_params, + num_reg_params, reg_params, + entry_point, + exit_point, + arch_info); + + if (retval != ERROR_OK) { + LOG_ERROR("error starting target flash write algorithm"); + return retval; + } + + while (count > 0) { + + retval = target_read_u32(target, rp_addr, &rp); + if (retval != ERROR_OK) { + LOG_ERROR("failed to get read pointer"); + break; + } + + LOG_DEBUG("count 0x%" PRIx32 " wp 0x%" PRIx32 " rp 0x%" PRIx32, count, wp, rp); + + if (rp == 0) { + LOG_ERROR("flash write algorithm aborted by target"); + retval = ERROR_FLASH_OPERATION_FAILED; + break; + } + + if ((rp & (block_size - 1)) || rp < fifo_start_addr || rp >= fifo_end_addr) { + LOG_ERROR("corrupted fifo read pointer 0x%" PRIx32, rp); + break; + } + + /* Count the number of bytes available in the fifo without + * crossing the wrap around. Make sure to not fill it completely, + * because that would make wp == rp and that's the empty condition. */ + uint32_t thisrun_bytes; + if (rp > wp) + thisrun_bytes = rp - wp - block_size; + else if (rp > fifo_start_addr) + thisrun_bytes = fifo_end_addr - wp; + else + thisrun_bytes = fifo_end_addr - wp - block_size; + + if (thisrun_bytes == 0) { + /* Throttle polling a bit if transfer is (much) faster than flash + * programming. The exact delay shouldn't matter as long as it's + * less than buffer size / flash speed. This is very unlikely to + * run when using high latency connections such as USB. */ + alive_sleep(10); + continue; + } + + /* Limit to the amount of data we actually want to write */ + if (thisrun_bytes > count * block_size) + thisrun_bytes = count * block_size; + + /* Write data to fifo */ + retval = target_write_buffer(target, wp, thisrun_bytes, buffer); + if (retval != ERROR_OK) + break; + + /* Update counters and wrap write pointer */ + buffer += thisrun_bytes; + count -= thisrun_bytes / block_size; + wp += thisrun_bytes; + if (wp >= fifo_end_addr) + wp = fifo_start_addr; + + /* Store updated write pointer to target */ + retval = target_write_u32(target, wp_addr, wp); + if (retval != ERROR_OK) + break; + } + + if (retval != ERROR_OK) { + /* abort flash write algorithm on target */ + target_write_u32(target, wp_addr, 0); + } + + int retval2 = target_wait_algorithm(target, num_mem_params, mem_params, + num_reg_params, reg_params, + exit_point, + 10000, + arch_info); + + if (retval2 != ERROR_OK) { + LOG_ERROR("error waiting for target flash write algorithm"); + retval = retval2; + } + + return retval; +} int target_read_memory(struct target *target, uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer) |