aboutsummaryrefslogtreecommitdiff
path: root/src/jtag/drivers/arm-jtag-ew.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/jtag/drivers/arm-jtag-ew.c')
-rw-r--r--src/jtag/drivers/arm-jtag-ew.c297
1 files changed, 122 insertions, 175 deletions
diff --git a/src/jtag/drivers/arm-jtag-ew.c b/src/jtag/drivers/arm-jtag-ew.c
index b0900501..35b6b929 100644
--- a/src/jtag/drivers/arm-jtag-ew.c
+++ b/src/jtag/drivers/arm-jtag-ew.c
@@ -59,9 +59,13 @@ static void armjtagew_end_state(tap_state_t state);
static void armjtagew_state_move(void);
static void armjtagew_path_move(int num_states, tap_state_t *path);
static void armjtagew_runtest(int num_cycles);
-static void armjtagew_scan(bool ir_scan, enum scan_type type, uint8_t *buffer, int scan_size, struct scan_command *command);
+static void armjtagew_scan(bool ir_scan,
+ enum scan_type type,
+ uint8_t *buffer,
+ int scan_size,
+ struct scan_command *command);
static void armjtagew_reset(int trst, int srst);
-//static void armjtagew_simple_command(uint8_t command);
+/* static void armjtagew_simple_command(uint8_t command); */
static int armjtagew_get_status(void);
/* tap buffer functions */
@@ -73,7 +77,7 @@ static void armjtagew_tap_append_scan(int length, uint8_t *buffer, struct scan_c
/* ARM-JTAG-EW lowlevel functions */
struct armjtagew {
- struct usb_dev_handle* usb_handle;
+ struct usb_dev_handle *usb_handle;
};
static struct armjtagew *armjtagew_usb_open(void);
@@ -89,10 +93,10 @@ static int armjtagew_get_version_info(void);
static void armjtagew_debug_buffer(uint8_t *buffer, int length);
#endif
-static struct armjtagew* armjtagew_handle;
+static struct armjtagew *armjtagew_handle;
-/***************************************************************************/
-/* External interface implementation */
+/**************************************************************************
+ * External interface implementation */
static int armjtagew_execute_queue(void)
{
@@ -101,13 +105,12 @@ static int armjtagew_execute_queue(void)
enum scan_type type;
uint8_t *buffer;
- while (cmd != NULL)
- {
- switch (cmd->type)
- {
+ while (cmd != NULL) {
+ switch (cmd->type) {
case JTAG_RUNTEST:
- DEBUG_JTAG_IO("runtest %i cycles, end in %i", cmd->cmd.runtest->num_cycles, \
- cmd->cmd.runtest->end_state);
+ DEBUG_JTAG_IO("runtest %i cycles, end in %i",
+ cmd->cmd.runtest->num_cycles, \
+ cmd->cmd.runtest->end_state);
armjtagew_end_state(cmd->cmd.runtest->end_state);
armjtagew_runtest(cmd->cmd.runtest->num_cycles);
@@ -122,10 +125,11 @@ static int armjtagew_execute_queue(void)
case JTAG_PATHMOVE:
DEBUG_JTAG_IO("pathmove: %i states, end in %i", \
- cmd->cmd.pathmove->num_states, \
- cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]);
+ cmd->cmd.pathmove->num_states, \
+ cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]);
- armjtagew_path_move(cmd->cmd.pathmove->num_states, cmd->cmd.pathmove->path);
+ armjtagew_path_move(cmd->cmd.pathmove->num_states,
+ cmd->cmd.pathmove->path);
break;
case JTAG_SCAN:
@@ -140,18 +144,20 @@ static int armjtagew_execute_queue(void)
armjtagew_debug_buffer(buffer, (scan_size + 7) / 8);
#endif
type = jtag_scan_type(cmd->cmd.scan);
- armjtagew_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size, cmd->cmd.scan);
+ armjtagew_scan(cmd->cmd.scan->ir_scan,
+ type, buffer,
+ scan_size, cmd->cmd.scan);
break;
case JTAG_RESET:
- DEBUG_JTAG_IO("reset trst: %i srst %i", cmd->cmd.reset->trst, cmd->cmd.reset->srst);
+ DEBUG_JTAG_IO("reset trst: %i srst %i",
+ cmd->cmd.reset->trst,
+ cmd->cmd.reset->srst);
armjtagew_tap_execute();
if (cmd->cmd.reset->trst == 1)
- {
tap_set_state(TAP_RESET);
- }
armjtagew_reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst);
break;
@@ -183,8 +189,7 @@ static int armjtagew_speed(int speed)
result = armjtagew_usb_message(armjtagew_handle, 5, 4);
- if (result < 0)
- {
+ if (result < 0) {
LOG_ERROR("ARM-JTAG-EW setting speed failed (%d)", result);
return ERROR_JTAG_DEVICE_ERROR;
}
@@ -192,15 +197,11 @@ static int armjtagew_speed(int speed)
usb_out_buffer[0] = CMD_GET_TCK_FREQUENCY;
result = armjtagew_usb_message(armjtagew_handle, 1, 4);
speed_real = (int)buf_get_u32(usb_in_buffer, 0, 32) / 1000;
- if (result < 0)
- {
+ if (result < 0) {
LOG_ERROR("ARM-JTAG-EW getting speed failed (%d)", result);
return ERROR_JTAG_DEVICE_ERROR;
- }
- else
- {
+ } else
LOG_INFO("Requested speed %dkHz, emulator reported %dkHz.", speed, speed_real);
- }
return ERROR_OK;
}
@@ -212,7 +213,7 @@ static int armjtagew_khz(int khz, int *jtag_speed)
return ERROR_OK;
}
-static int armjtagew_speed_div(int speed, int* khz)
+static int armjtagew_speed_div(int speed, int *khz)
{
*khz = speed;
@@ -225,17 +226,15 @@ static int armjtagew_init(void)
armjtagew_handle = armjtagew_usb_open();
- if (armjtagew_handle == 0)
- {
- LOG_ERROR("Cannot find ARM-JTAG-EW Interface! Please check connection and permissions.");
+ if (armjtagew_handle == 0) {
+ LOG_ERROR(
+ "Cannot find ARM-JTAG-EW Interface! Please check connection and permissions.");
return ERROR_JTAG_INIT_FAILED;
}
check_cnt = 0;
- while (check_cnt < 3)
- {
- if (armjtagew_get_version_info() == ERROR_OK)
- {
+ while (check_cnt < 3) {
+ if (armjtagew_get_version_info() == ERROR_OK) {
/* attempt to get status */
armjtagew_get_status();
break;
@@ -245,9 +244,7 @@ static int armjtagew_init(void)
}
if (check_cnt == 3)
- {
LOG_INFO("ARM-JTAG-EW initial read failed, don't worry");
- }
/* Initial JTAG speed (for reset and initialization): 32 kHz */
armjtagew_speed(32);
@@ -266,17 +263,14 @@ static int armjtagew_quit(void)
return ERROR_OK;
}
-/***************************************************************************/
-/* Queue command implementations */
+/**************************************************************************
+ * Queue command implementations */
static void armjtagew_end_state(tap_state_t state)
{
if (tap_is_state_stable(state))
- {
tap_set_end_state(state);
- }
- else
- {
+ else {
LOG_ERROR("BUG: %i is not a valid end state", state);
exit(-1);
}
@@ -290,8 +284,7 @@ static void armjtagew_state_move(void)
uint8_t tms_scan = tap_get_tms_path(tap_get_state(), tap_get_end_state());
int tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
- for (i = 0; i < tms_count; i++)
- {
+ for (i = 0; i < tms_count; i++) {
tms = (tms_scan >> i) & 1;
armjtagew_tap_append_step(tms, 0);
}
@@ -303,24 +296,19 @@ static void armjtagew_path_move(int num_states, tap_state_t *path)
{
int i;
- for (i = 0; i < num_states; i++)
- {
+ for (i = 0; i < num_states; i++) {
/*
* TODO: The ARM-JTAG-EW hardware delays TDI with 3 TCK cycles when in RTCK mode.
* Either handle that here, or update the documentation with examples
* how to fix that in the configuration files.
*/
if (path[i] == tap_state_transition(tap_get_state(), false))
- {
armjtagew_tap_append_step(0, 0);
- }
else if (path[i] == tap_state_transition(tap_get_state(), true))
- {
armjtagew_tap_append_step(1, 0);
- }
- else
- {
- LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_name(tap_get_state()), tap_state_name(path[i]));
+ else {
+ LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition",
+ tap_state_name(tap_get_state()), tap_state_name(path[i]));
exit(-1);
}
@@ -337,27 +325,26 @@ static void armjtagew_runtest(int num_cycles)
tap_state_t saved_end_state = tap_get_end_state();
/* only do a state_move when we're not already in IDLE */
- if (tap_get_state() != TAP_IDLE)
- {
+ if (tap_get_state() != TAP_IDLE) {
armjtagew_end_state(TAP_IDLE);
armjtagew_state_move();
}
/* execute num_cycles */
for (i = 0; i < num_cycles; i++)
- {
armjtagew_tap_append_step(0, 0);
- }
/* finish in end_state */
armjtagew_end_state(saved_end_state);
if (tap_get_state() != tap_get_end_state())
- {
armjtagew_state_move();
- }
}
-static void armjtagew_scan(bool ir_scan, enum scan_type type, uint8_t *buffer, int scan_size, struct scan_command *command)
+static void armjtagew_scan(bool ir_scan,
+ enum scan_type type,
+ uint8_t *buffer,
+ int scan_size,
+ struct scan_command *command)
{
tap_state_t saved_end_state;
@@ -380,9 +367,7 @@ static void armjtagew_scan(bool ir_scan, enum scan_type type, uint8_t *buffer, i
tap_set_state(ir_scan ? TAP_IRPAUSE : TAP_DRPAUSE);
if (tap_get_state() != tap_get_end_state())
- {
armjtagew_state_move();
- }
}
static void armjtagew_reset(int trst, int srst)
@@ -396,27 +381,21 @@ static void armjtagew_reset(int trst, int srst)
LOG_DEBUG("trst: %i, srst: %i", trst, srst);
- if (srst == 0)
- {
+ if (srst == 0) {
val |= srst_mask;
outp_en &= ~srst_mask; /* tristate */
change_mask |= srst_mask;
- }
- else if (srst == 1)
- {
+ } else if (srst == 1) {
val &= ~srst_mask;
outp_en |= srst_mask;
change_mask |= srst_mask;
}
- if (trst == 0)
- {
+ if (trst == 0) {
val |= trst_mask;
outp_en &= ~trst_mask; /* tristate */
change_mask |= trst_mask;
- }
- else if (trst == 1)
- {
+ } else if (trst == 1) {
val &= ~trst_mask;
outp_en |= trst_mask;
change_mask |= trst_mask;
@@ -428,9 +407,7 @@ static void armjtagew_reset(int trst, int srst)
usb_out_buffer[3] = change_mask;
result = armjtagew_usb_write(armjtagew_handle, 4);
if (result != 4)
- {
LOG_ERROR("ARM-JTAG-EW TRST/SRST pin set failed failed (%d)", result);
- }
}
static int armjtagew_get_status(void)
@@ -440,27 +417,22 @@ static int armjtagew_get_status(void)
usb_out_buffer[0] = CMD_GET_TAPHW_STATE;
result = armjtagew_usb_message(armjtagew_handle, 1, 12);
- if (result == 0)
- {
+ if (result == 0) {
unsigned int u_tg = buf_get_u32(usb_in_buffer, 0, 16);
- LOG_INFO("U_tg = %d mV, U_aux = %d mV, U_tgpwr = %d mV, I_tgpwr = %d mA, D1 = %d, Target power %s %s",
- (int)(buf_get_u32(usb_in_buffer + 0, 0, 16)),
- (int)(buf_get_u32(usb_in_buffer + 2, 0, 16)),
- (int)(buf_get_u32(usb_in_buffer + 4, 0, 16)),
- (int)(buf_get_u32(usb_in_buffer + 6, 0, 16)),
- usb_in_buffer[9],
- usb_in_buffer[11] ? "OVERCURRENT" : "OK",
- usb_in_buffer[10] ? "enabled" : "disabled");
+ LOG_INFO(
+ "U_tg = %d mV, U_aux = %d mV, U_tgpwr = %d mV, I_tgpwr = %d mA, D1 = %d, Target power %s %s",
+ (int)(buf_get_u32(usb_in_buffer + 0, 0, 16)),
+ (int)(buf_get_u32(usb_in_buffer + 2, 0, 16)),
+ (int)(buf_get_u32(usb_in_buffer + 4, 0, 16)),
+ (int)(buf_get_u32(usb_in_buffer + 6, 0, 16)),
+ usb_in_buffer[9],
+ usb_in_buffer[11] ? "OVERCURRENT" : "OK",
+ usb_in_buffer[10] ? "enabled" : "disabled");
if (u_tg < 1500)
- {
LOG_ERROR("Vref too low. Check Target Power");
- }
- }
- else
- {
+ } else
LOG_ERROR("ARM-JTAG-EW command CMD_GET_TAPHW_STATE failed (%d)", result);
- }
return ERROR_OK;
}
@@ -475,34 +447,35 @@ static int armjtagew_get_version_info(void)
usb_out_buffer[0] = CMD_GET_VERSION;
result = armjtagew_usb_message(armjtagew_handle, 1, 4 + 15 + 256);
- if (result != 0)
- {
+ if (result != 0) {
LOG_ERROR("ARM-JTAG-EW command CMD_GET_VERSION failed (%d)", result);
return ERROR_JTAG_DEVICE_ERROR;
}
-
memcpy(sn, usb_in_buffer + 4, 15);
sn[15] = '\0';
memcpy(auxinfo, usb_in_buffer + 4+15, 256);
auxinfo[256] = '\0';
- LOG_INFO("ARM-JTAG-EW firmware version %d.%d, hardware revision %c, SN=%s, Additional info: %s", \
- usb_in_buffer[1], usb_in_buffer[0], \
- isgraph(usb_in_buffer[2]) ? usb_in_buffer[2] : 'X', \
- sn, auxinfo);
+ LOG_INFO(
+ "ARM-JTAG-EW firmware version %d.%d, hardware revision %c, SN=%s, Additional info: %s", \
+ usb_in_buffer[1],
+ usb_in_buffer[0], \
+ isgraph(usb_in_buffer[2]) ? usb_in_buffer[2] : 'X', \
+ sn,
+ auxinfo);
if (1 != usb_in_buffer[1] || 6 != usb_in_buffer[0])
- {
- LOG_WARNING("ARM-JTAG-EW firmware version %d.%d is untested with this version of OpenOCD. You might experience unexpected behavior.", usb_in_buffer[1], usb_in_buffer[0]);
- }
+ LOG_WARNING(
+ "ARM-JTAG-EW firmware version %d.%d is untested with this version of OpenOCD. You might experience unexpected behavior.",
+ usb_in_buffer[1],
+ usb_in_buffer[0]);
return ERROR_OK;
}
COMMAND_HANDLER(armjtagew_handle_armjtagew_info_command)
{
- if (armjtagew_get_version_info() == ERROR_OK)
- {
+ if (armjtagew_get_version_info() == ERROR_OK) {
/* attempt to get status */
armjtagew_get_status();
}
@@ -532,8 +505,8 @@ struct jtag_interface armjtagew_interface = {
.quit = armjtagew_quit,
};
-/***************************************************************************/
-/* ARM-JTAG-EW tap functions */
+/**************************************************************************
+ * ARM-JTAG-EW tap functions */
/* 2048 is the max value we can use here */
#define ARMJTAGEW_TAP_BUFFER_SIZE 2048
@@ -545,8 +518,8 @@ static uint8_t tdo_buffer[ARMJTAGEW_TAP_BUFFER_SIZE];
struct pending_scan_result {
int first; /* First bit position in tdo_buffer to read */
- int length; /* Number of bits to read */
- struct scan_command *command; /* Corresponding scan command */
+ int length; /* Number of bits to read */
+ struct scan_command *command; /* Corresponding scan command */
uint8_t *buffer;
};
@@ -569,9 +542,7 @@ static void armjtagew_tap_ensure_space(int scans, int bits)
int available_bits = ARMJTAGEW_TAP_BUFFER_SIZE * 8 - tap_length;
if (scans > available_scans || bits > available_bits)
- {
armjtagew_tap_execute();
- }
}
static void armjtagew_tap_append_step(int tms, int tdi)
@@ -579,40 +550,29 @@ static void armjtagew_tap_append_step(int tms, int tdi)
last_tms = tms;
int index_local = tap_length / 8;
- if (index_local < ARMJTAGEW_TAP_BUFFER_SIZE)
- {
+ if (index_local < ARMJTAGEW_TAP_BUFFER_SIZE) {
int bit_index = tap_length % 8;
uint8_t bit = 1 << bit_index;
if (tms)
- {
tms_buffer[index_local] |= bit;
- }
else
- {
tms_buffer[index_local] &= ~bit;
- }
if (tdi)
- {
tdi_buffer[index_local] |= bit;
- }
else
- {
tdi_buffer[index_local] &= ~bit;
- }
tap_length++;
- }
- else
- {
+ } else
LOG_ERROR("armjtagew_tap_append_step, overflow");
- }
}
void armjtagew_tap_append_scan(int length, uint8_t *buffer, struct scan_command *command)
{
- struct pending_scan_result *pending_scan_result = &pending_scan_results_buffer[pending_scan_results_length];
+ struct pending_scan_result *pending_scan_result =
+ &pending_scan_results_buffer[pending_scan_results_length];
int i;
pending_scan_result->first = tap_length;
@@ -621,9 +581,7 @@ void armjtagew_tap_append_scan(int length, uint8_t *buffer, struct scan_command
pending_scan_result->buffer = buffer;
for (i = 0; i < length; i++)
- {
armjtagew_tap_append_step((i < length-1 ? 0 : 1), (buffer[i/8] >> (i%8)) & 1);
- }
pending_scan_results_length++;
}
@@ -637,11 +595,9 @@ static int armjtagew_tap_execute(void)
int i;
int result;
- if (tap_length > 0)
- {
+ if (tap_length > 0) {
/* Pad last byte so that tap_length is divisible by 8 */
- while (tap_length % 8 != 0)
- {
+ while (tap_length % 8 != 0) {
/* More of the last TMS value keeps us in the same state,
* analogous to free-running JTAG interfaces. */
armjtagew_tap_append_step(last_tms, 0);
@@ -654,36 +610,33 @@ static int armjtagew_tap_execute(void)
tms_offset = 3;
for (i = 0; i < byte_length; i++)
- {
- usb_out_buffer[tms_offset + i] = flip_u32(tms_buffer[i],8);
- }
+ usb_out_buffer[tms_offset + i] = flip_u32(tms_buffer[i], 8);
tdi_offset = tms_offset + byte_length;
for (i = 0; i < byte_length; i++)
- {
- usb_out_buffer[tdi_offset + i] = flip_u32(tdi_buffer[i],8);
- }
+ usb_out_buffer[tdi_offset + i] = flip_u32(tdi_buffer[i], 8);
- result = armjtagew_usb_message(armjtagew_handle, 3 + 2 * byte_length, byte_length + 4);
+ result = armjtagew_usb_message(armjtagew_handle,
+ 3 + 2 * byte_length,
+ byte_length + 4);
- if (result == 0)
- {
+ if (result == 0) {
int stat_local;
stat_local = (int)buf_get_u32(usb_in_buffer + byte_length, 0, 32);
if (stat_local) {
- LOG_ERROR("armjtagew_tap_execute, emulator returned error code %d for a CMD_TAP_SHIFT command", stat_local);
+ LOG_ERROR(
+ "armjtagew_tap_execute, emulator returned error code %d for a CMD_TAP_SHIFT command",
+ stat_local);
return ERROR_JTAG_QUEUE_FAILED;
}
for (i = 0; i < byte_length; i++)
- {
- tdo_buffer[i] = flip_u32(usb_in_buffer[i],8);
- }
+ tdo_buffer[i] = flip_u32(usb_in_buffer[i], 8);
- for (i = 0; i < pending_scan_results_length; i++)
- {
- struct pending_scan_result *pending_scan_result = &pending_scan_results_buffer[i];
+ for (i = 0; i < pending_scan_results_length; i++) {
+ struct pending_scan_result *pending_scan_result =
+ &pending_scan_results_buffer[i];
uint8_t *buffer = pending_scan_result->buffer;
int length = pending_scan_result->length;
int first = pending_scan_result->first;
@@ -698,21 +651,18 @@ static int armjtagew_tap_execute(void)
armjtagew_debug_buffer(buffer, byte_length);
#endif
- if (jtag_read_buffer(buffer, command) != ERROR_OK)
- {
+ if (jtag_read_buffer(buffer, command) != ERROR_OK) {
armjtagew_tap_init();
return ERROR_JTAG_QUEUE_FAILED;
}
if (pending_scan_result->buffer != NULL)
- {
free(pending_scan_result->buffer);
- }
}
- }
- else
- {
- LOG_ERROR("armjtagew_tap_execute, wrong result %d, expected %d", result, byte_length);
+ } else {
+ LOG_ERROR("armjtagew_tap_execute, wrong result %d, expected %d",
+ result,
+ byte_length);
return ERROR_JTAG_QUEUE_FAILED;
}
@@ -722,10 +672,10 @@ static int armjtagew_tap_execute(void)
return ERROR_OK;
}
-/*****************************************************************************/
-/* JLink USB low-level functions */
+/****************************************************************************
+ * JLink USB low-level functions */
-static struct armjtagew* armjtagew_usb_open()
+static struct armjtagew *armjtagew_usb_open()
{
usb_init();
@@ -765,17 +715,15 @@ static int armjtagew_usb_message(struct armjtagew *armjtagew, int out_length, in
int result;
result = armjtagew_usb_write(armjtagew, out_length);
- if (result == out_length)
- {
+ if (result == out_length) {
result = armjtagew_usb_read(armjtagew, in_length);
- if (result != in_length)
- {
- LOG_ERROR("usb_bulk_read failed (requested=%d, result=%d)", in_length, result);
+ if (result != in_length) {
+ LOG_ERROR("usb_bulk_read failed (requested=%d, result=%d)",
+ in_length,
+ result);
return -1;
}
- }
- else
- {
+ } else {
LOG_ERROR("usb_bulk_write failed (requested=%d, result=%d)", out_length, result);
return -1;
}
@@ -787,14 +735,15 @@ static int armjtagew_usb_write(struct armjtagew *armjtagew, int out_length)
{
int result;
- if (out_length > ARMJTAGEW_OUT_BUFFER_SIZE)
- {
- LOG_ERROR("armjtagew_write illegal out_length=%d (max=%d)", out_length, ARMJTAGEW_OUT_BUFFER_SIZE);
+ if (out_length > ARMJTAGEW_OUT_BUFFER_SIZE) {
+ LOG_ERROR("armjtagew_write illegal out_length=%d (max=%d)",
+ out_length,
+ ARMJTAGEW_OUT_BUFFER_SIZE);
return -1;
}
result = usb_bulk_write(armjtagew->usb_handle, ARMJTAGEW_EPT_BULK_OUT, \
- (char*)usb_out_buffer, out_length, ARMJTAGEW_USB_TIMEOUT);
+ (char *)usb_out_buffer, out_length, ARMJTAGEW_USB_TIMEOUT);
DEBUG_JTAG_IO("armjtagew_usb_write, out_length = %d, result = %d", out_length, result);
@@ -808,7 +757,7 @@ static int armjtagew_usb_write(struct armjtagew *armjtagew, int out_length)
static int armjtagew_usb_read(struct armjtagew *armjtagew, int exp_in_length)
{
int result = usb_bulk_read(armjtagew->usb_handle, ARMJTAGEW_EPT_BULK_IN, \
- (char*)usb_in_buffer, exp_in_length, ARMJTAGEW_USB_TIMEOUT);
+ (char *)usb_in_buffer, exp_in_length, ARMJTAGEW_USB_TIMEOUT);
DEBUG_JTAG_IO("armjtagew_usb_read, result = %d", result);
@@ -828,17 +777,15 @@ static void armjtagew_debug_buffer(uint8_t *buffer, int length)
int i;
int j;
- for (i = 0; i < length; i += BYTES_PER_LINE)
- {
+ for (i = 0; i < length; i += BYTES_PER_LINE) {
snprintf(line, 5, "%04x", i);
- for (j = i; j < i + BYTES_PER_LINE && j < length; j++)
- {
+ for (j = i; j < i + BYTES_PER_LINE && j < length; j++) {
snprintf(s, 4, " %02x", buffer[j]);
strcat(line, s);
}
LOG_DEBUG("%s", line);
- // Prevent GDB timeout (writing to log might take some time)
+ /* Prevent GDB timeout (writing to log might take some time) */
keep_alive();
}
}
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-21 08:20:58 +0000