aboutsummaryrefslogtreecommitdiff
path: root/src/flash/nand/at91sam9.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/flash/nand/at91sam9.c')
-rw-r--r--src/flash/nand/at91sam9.c750
1 files changed, 750 insertions, 0 deletions
diff --git a/src/flash/nand/at91sam9.c b/src/flash/nand/at91sam9.c
new file mode 100644
index 00000000..7cfd763a
--- /dev/null
+++ b/src/flash/nand/at91sam9.c
@@ -0,0 +1,750 @@
+/*
+ * Copyright (C) 2009 by Dean Glazeski
+ * dnglaze@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <target/arm.h>
+#include <helper/log.h>
+#include "imp.h"
+#include "arm_io.h"
+
+#define AT91C_PIOx_SODR (0x30) /**< Offset to PIO SODR. */
+#define AT91C_PIOx_CODR (0x34) /**< Offset to PIO CODR. */
+#define AT91C_PIOx_PDSR (0x3C) /**< Offset to PIO PDSR. */
+#define AT91C_ECCx_CR (0x00) /**< Offset to ECC CR. */
+#define AT91C_ECCx_SR (0x08) /**< Offset to ECC SR. */
+#define AT91C_ECCx_PR (0x0C) /**< Offset to ECC PR. */
+#define AT91C_ECCx_NPR (0x10) /**< Offset to ECC NPR. */
+
+/**
+ * Representation of a pin on an AT91SAM9 chip.
+ */
+struct at91sam9_pin {
+ /** Target this pin is on. */
+ struct target *target;
+
+ /** Address of the PIO controller. */
+ uint32_t pioc;
+
+ /** Pin number. */
+ uint32_t num;
+};
+
+/**
+ * Private data for the controller that is stored in the NAND device structure.
+ */
+struct at91sam9_nand {
+ /** Target the NAND is attached to. */
+ struct target *target;
+
+ /** Address of the ECC controller for NAND. */
+ uint32_t ecc;
+
+ /** Address data is written to. */
+ uint32_t data;
+
+ /** Address commands are written to. */
+ uint32_t cmd;
+
+ /** Address addresses are written to. */
+ uint32_t addr;
+
+ /** I/O structure for hosted reads/writes. */
+ struct arm_nand_data io;
+
+ /** Pin representing the ready/~busy line. */
+ struct at91sam9_pin busy;
+
+ /** Pin representing the chip enable. */
+ struct at91sam9_pin ce;
+};
+
+/**
+ * Checks if the target is halted and prints an error message if it isn't.
+ *
+ * @param target Target to be checked.
+ * @param label String label for where function is called from.
+ * @return True if the target is halted.
+ */
+static int at91sam9_halted(struct target *target, const char *label)
+{
+ if (target->state == TARGET_HALTED)
+ return true;
+
+ LOG_ERROR("Target must be halted to use NAND controller (%s)", label);
+ return false;
+}
+
+/**
+ * Initialize the AT91SAM9 NAND controller.
+ *
+ * @param nand NAND device the controller is attached to.
+ * @return Success or failure of initialization.
+ */
+static int at91sam9_init(struct nand_device *nand)
+{
+ struct at91sam9_nand *info = nand->controller_priv;
+ struct target *target = info->target;
+
+ if (!at91sam9_halted(target, "init")) {
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+/**
+ * Enable NAND device attached to a controller.
+ *
+ * @param info NAND controller information for controlling NAND device.
+ * @return Success or failure of the enabling.
+ */
+static int at91sam9_enable(struct at91sam9_nand *info)
+{
+ struct target *target = info->target;
+
+ return target_write_u32(target, info->ce.pioc + AT91C_PIOx_CODR, 1 << info->ce.num);
+}
+
+/**
+ * Disable NAND device attached to a controller.
+ *
+ * @param info NAND controller information for controlling NAND device.
+ * @return Success or failure of the disabling.
+ */
+static int at91sam9_disable(struct at91sam9_nand *info)
+{
+ struct target *target = info->target;
+
+ return target_write_u32(target, info->ce.pioc + AT91C_PIOx_SODR, 1 << info->ce.num);
+}
+
+/**
+ * Send a command to the NAND device.
+ *
+ * @param nand NAND device to write the command to.
+ * @param command Command to be written.
+ * @return Success or failure of writing the command.
+ */
+static int at91sam9_command(struct nand_device *nand, uint8_t command)
+{
+ struct at91sam9_nand *info = nand->controller_priv;
+ struct target *target = info->target;
+
+ if (!at91sam9_halted(target, "command")) {
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ at91sam9_enable(info);
+
+ return target_write_u8(target, info->cmd, command);
+}
+
+/**
+ * Reset the AT91SAM9 NAND controller.
+ *
+ * @param nand NAND device to be reset.
+ * @return Success or failure of reset.
+ */
+static int at91sam9_reset(struct nand_device *nand)
+{
+ struct at91sam9_nand *info = nand->controller_priv;
+
+ if (!at91sam9_halted(info->target, "reset")) {
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ return at91sam9_disable(info);
+}
+
+/**
+ * Send an address to the NAND device attached to an AT91SAM9 NAND controller.
+ *
+ * @param nand NAND device to send the address to.
+ * @param address Address to be sent.
+ * @return Success or failure of sending the address.
+ */
+static int at91sam9_address(struct nand_device *nand, uint8_t address)
+{
+ struct at91sam9_nand *info = nand->controller_priv;
+ struct target *target = info->target;
+
+ if (!at91sam9_halted(info->target, "address")) {
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ return target_write_u8(target, info->addr, address);
+}
+
+/**
+ * Read data directly from the NAND device attached to an AT91SAM9 NAND
+ * controller.
+ *
+ * @param nand NAND device to read from.
+ * @param data Pointer to where the data should be put.
+ * @return Success or failure of reading the data.
+ */
+static int at91sam9_read_data(struct nand_device *nand, void *data)
+{
+ struct at91sam9_nand *info = nand->controller_priv;
+ struct target *target = info->target;
+
+ if (!at91sam9_halted(info->target, "read data")) {
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ return target_read_u8(target, info->data, data);
+}
+
+/**
+ * Write data directly to the NAND device attached to an AT91SAM9 NAND
+ * controller.
+ *
+ * @param nand NAND device to be written to.
+ * @param data Data to be written.
+ * @return Success or failure of the data write.
+ */
+static int at91sam9_write_data(struct nand_device *nand, uint16_t data)
+{
+ struct at91sam9_nand *info = nand->controller_priv;
+ struct target *target = info->target;
+
+ if (!at91sam9_halted(target, "write data")) {
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ return target_write_u8(target, info->data, data);
+}
+
+/**
+ * Determine if the NAND device is ready by looking at the ready/~busy pin.
+ *
+ * @param nand NAND device to check.
+ * @param timeout Time in milliseconds to wait for NAND to be ready.
+ * @return True if the NAND is ready in the timeout period.
+ */
+static int at91sam9_nand_ready(struct nand_device *nand, int timeout)
+{
+ struct at91sam9_nand *info = nand->controller_priv;
+ struct target *target = info->target;
+ uint32_t status;
+
+ if (!at91sam9_halted(target, "nand ready")) {
+ return 0;
+ }
+
+ do {
+ target_read_u32(target, info->busy.pioc + AT91C_PIOx_PDSR, &status);
+
+ if (status & (1 << info->busy.num)) {
+ return 1;
+ }
+
+ alive_sleep(1);
+ } while (timeout-- > 0);
+
+ return 0;
+}
+
+/**
+ * Read a block of data from the NAND device attached to an AT91SAM9. This
+ * utilizes the ARM hosted NAND read function.
+ *
+ * @param nand NAND device to read from.
+ * @param data Pointer to where the read data should be placed.
+ * @param size Size of the data being read.
+ * @return Success or failure of the hosted read.
+ */
+static int at91sam9_read_block_data(struct nand_device *nand, uint8_t *data, int size)
+{
+ struct at91sam9_nand *info = nand->controller_priv;
+ struct arm_nand_data *io = &info->io;
+ int status;
+
+ if (!at91sam9_halted(info->target, "read block")) {
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ io->chunk_size = nand->page_size;
+ status = arm_nandread(io, data, size);
+
+ return status;
+}
+
+/**
+ * Write a block of data to a NAND device attached to an AT91SAM9. This uses
+ * the ARM hosted write function to write the data.
+ *
+ * @param nand NAND device to write to.
+ * @param data Data to be written to device.
+ * @param size Size of the data being written.
+ * @return Success or failure of the hosted write.
+ */
+static int at91sam9_write_block_data(struct nand_device *nand, uint8_t *data, int size)
+{
+ struct at91sam9_nand *info = nand->controller_priv;
+ struct arm_nand_data *io = &info->io;
+ int status;
+
+ if (!at91sam9_halted(info->target, "write block")) {
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ io->chunk_size = nand->page_size;
+ status = arm_nandwrite(io, data, size);
+
+ return status;
+}
+
+/**
+ * Initialize the ECC controller on the AT91SAM9.
+ *
+ * @param target Target to configure ECC on.
+ * @param info NAND controller information for where the ECC is.
+ * @return Success or failure of initialization.
+ */
+static int at91sam9_ecc_init(struct target *target, struct at91sam9_nand *info)
+{
+ if (!info->ecc) {
+ LOG_ERROR("ECC controller address must be set when not reading raw NAND data");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ // reset ECC parity registers
+ return target_write_u32(target, info->ecc + AT91C_ECCx_CR, 1);
+}
+
+/**
+ * Initialize an area for the OOB based on whether a user is requesting the OOB
+ * data. This determines the size of the OOB and allocates the space in case
+ * the user has not requested the OOB data.
+ *
+ * @param nand NAND device we are creating an OOB for.
+ * @param oob Pointer to the user supplied OOB area.
+ * @param size Size of the OOB.
+ * @return Pointer to an area to store OOB data.
+ */
+static uint8_t * at91sam9_oob_init(struct nand_device *nand, uint8_t *oob, uint32_t *size)
+{
+ if (!oob) {
+ // user doesn't want OOB, allocate it
+ if (nand->page_size == 512) {
+ *size = 16;
+ } else if (nand->page_size == 2048) {
+ *size = 64;
+ }
+
+ oob = malloc(*size);
+ if (!oob) {
+ LOG_ERROR("Unable to allocate space for OOB");
+ }
+
+ memset(oob, 0xFF, *size);
+ }
+
+ return oob;
+}
+
+/**
+ * Reads a page from an AT91SAM9 NAND controller and verifies using 1-bit ECC
+ * controller on chip. This makes an attempt to correct any errors that are
+ * encountered while reading the page of data.
+ *
+ * @param nand NAND device to read from
+ * @param page Page to be read.
+ * @param data Pointer to where data should be read to.
+ * @param data_size Size of the data to be read.
+ * @param oob Pointer to where OOB data should be read to.
+ * @param oob_size Size of the OOB data to be read.
+ * @return Success or failure of reading the NAND page.
+ */
+static int at91sam9_read_page(struct nand_device *nand, uint32_t page,
+ uint8_t *data, uint32_t data_size, uint8_t *oob, uint32_t oob_size)
+{
+ int retval;
+ struct at91sam9_nand *info = nand->controller_priv;
+ struct target *target = info->target;
+ uint8_t *oob_data;
+ uint32_t status;
+
+ retval = at91sam9_ecc_init(target, info);
+ if (ERROR_OK != retval) {
+ return retval;
+ }
+
+ retval = nand_page_command(nand, page, NAND_CMD_READ0, !data);
+ if (ERROR_OK != retval) {
+ return retval;
+ }
+
+ if (data) {
+ retval = nand_read_data_page(nand, data, data_size);
+ if (ERROR_OK != retval) {
+ return retval;
+ }
+ }
+
+ oob_data = at91sam9_oob_init(nand, oob, &oob_size);
+ retval = nand_read_data_page(nand, oob_data, oob_size);
+ if (ERROR_OK == retval && data) {
+ target_read_u32(target, info->ecc + AT91C_ECCx_SR, &status);
+ if (status & 1) {
+ LOG_ERROR("Error detected!");
+ if (status & 4) {
+ LOG_ERROR("Multiple errors encountered; unrecoverable!");
+ } else {
+ // attempt recovery
+ uint32_t parity;
+
+ target_read_u32(target, info->ecc + AT91C_ECCx_PR, &parity);
+ uint32_t word = (parity & 0x0000FFF0) >> 4;
+ uint32_t bit = parity & 0x0F;
+
+ data[word] ^= (0x1) << bit;
+ LOG_INFO("Data word %d, bit %d corrected.", word, bit);
+ }
+ }
+
+ if (status & 2) {
+ // we could write back correct ECC data
+ LOG_ERROR("Error in ECC bytes detected");
+ }
+ }
+
+ if (!oob) {
+ // if it wasn't asked for, free it
+ free(oob_data);
+ }
+
+ return retval;
+}
+
+/**
+ * Write a page of data including 1-bit ECC information to a NAND device
+ * attached to an AT91SAM9 controller. If there is OOB data to be written,
+ * this will ignore the computed ECC from the ECC controller.
+ *
+ * @param nand NAND device to write to.
+ * @param page Page to write.
+ * @param data Pointer to data being written.
+ * @param data_size Size of the data being written.
+ * @param oob Pointer to OOB data being written.
+ * @param oob_size Size of the OOB data.
+ * @return Success or failure of the page write.
+ */
+static int at91sam9_write_page(struct nand_device *nand, uint32_t page,
+ uint8_t *data, uint32_t data_size, uint8_t *oob, uint32_t oob_size)
+{
+ struct at91sam9_nand *info = nand->controller_priv;
+ struct target *target = info->target;
+ int retval;
+ uint8_t *oob_data = oob;
+ uint32_t parity, nparity;
+
+ retval = at91sam9_ecc_init(target, info);
+ if (ERROR_OK != retval) {
+ return retval;
+ }
+
+ retval = nand_page_command(nand, page, NAND_CMD_SEQIN, !data);
+ if (ERROR_OK != retval) {
+ return retval;
+ }
+
+ if (data) {
+ retval = nand_write_data_page(nand, data, data_size);
+ if (ERROR_OK != retval) {
+ LOG_ERROR("Unable to write data to NAND device");
+ return retval;
+ }
+ }
+
+ oob_data = at91sam9_oob_init(nand, oob, &oob_size);
+
+ if (!oob) {
+ // no OOB given, so read in the ECC parity from the ECC controller
+ target_read_u32(target, info->ecc + AT91C_ECCx_PR, &parity);
+ target_read_u32(target, info->ecc + AT91C_ECCx_NPR, &nparity);
+
+ oob_data[0] = (uint8_t) parity;
+ oob_data[1] = (uint8_t) (parity >> 8);
+ oob_data[2] = (uint8_t) nparity;
+ oob_data[3] = (uint8_t) (nparity >> 8);
+ }
+
+ retval = nand_write_data_page(nand, oob_data, oob_size);
+
+ if (!oob) {
+ free(oob_data);
+ }
+
+ if (ERROR_OK != retval) {
+ LOG_ERROR("Unable to write OOB data to NAND");
+ return retval;
+ }
+
+ retval = nand_write_finish(nand);
+
+ return retval;
+}
+
+/**
+ * Handle the initial NAND device command for AT91SAM9 controllers. This
+ * initializes much of the controller information struct to be ready for future
+ * reads and writes.
+ */
+NAND_DEVICE_COMMAND_HANDLER(at91sam9_nand_device_command)
+{
+ struct target *target = NULL;
+ unsigned long chip = 0, ecc = 0;
+ struct at91sam9_nand *info = NULL;
+
+ LOG_DEBUG("AT91SAM9 NAND Device Command\n");
+
+ if (CMD_ARGC < 3 || CMD_ARGC > 4) {
+ LOG_ERROR("parameters: %s target chip_addr", CMD_ARGV[0]);
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ target = get_target(CMD_ARGV[1]);
+ if (!target) {
+ LOG_ERROR("invalid target: %s", CMD_ARGV[1]);
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ COMMAND_PARSE_NUMBER(ulong, CMD_ARGV[2], chip);
+ if (chip == 0) {
+ LOG_ERROR("invalid NAND chip address: %s", CMD_ARGV[2]);
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ if (CMD_ARGC == 4) {
+ COMMAND_PARSE_NUMBER(ulong, CMD_ARGV[3], ecc);
+ if (ecc == 0) {
+ LOG_ERROR("invalid ECC controller address: %s", CMD_ARGV[3]);
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ }
+
+ info = calloc(1, sizeof(*info));
+ if (!info) {
+ LOG_ERROR("unable to allocate space for controller private data");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ info->target = target;
+ info->data = chip;
+ info->cmd = chip | (1 << 22);
+ info->addr = chip | (1 << 21);
+ info->ecc = ecc;
+
+ nand->controller_priv = info;
+ info->io.target = target;
+ info->io.data = info->data;
+ info->io.op = ARM_NAND_NONE;
+
+ return ERROR_OK;
+}
+
+/**
+ * Handle the AT91SAM9 CLE command for specifying the address line to use for
+ * writing commands to a NAND device.
+ */
+COMMAND_HANDLER(handle_at91sam9_cle_command)
+{
+ struct nand_device *nand = NULL;
+ struct at91sam9_nand *info = NULL;
+ unsigned num, address_line;
+
+ if (CMD_ARGC != 2) {
+ command_print(CMD_CTX, "incorrect number of arguments for 'at91sam9 cle' command");
+ return ERROR_OK;
+ }
+
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num);
+ nand = get_nand_device_by_num(num);
+ if (!nand) {
+ command_print(CMD_CTX, "invalid nand device number: %s", CMD_ARGV[0]);
+ return ERROR_OK;
+ }
+
+ info = nand->controller_priv;
+
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[1], address_line);
+ info->cmd = info->data | (1 << address_line);
+
+ return ERROR_OK;
+}
+
+/**
+ * Handle the AT91SAM9 ALE command for specifying the address line to use for
+ * writing addresses to the NAND device.
+ */
+COMMAND_HANDLER(handle_at91sam9_ale_command)
+{
+ struct nand_device *nand = NULL;
+ struct at91sam9_nand *info = NULL;
+ unsigned num, address_line;
+
+ if (CMD_ARGC != 2) {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num);
+ nand = get_nand_device_by_num(num);
+ if (!nand) {
+ command_print(CMD_CTX, "invalid nand device number: %s", CMD_ARGV[0]);
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+
+ info = nand->controller_priv;
+
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[1], address_line);
+ info->addr = info->data | (1 << address_line);
+
+ return ERROR_OK;
+}
+
+/**
+ * Handle the AT91SAM9 RDY/~BUSY command for specifying the pin that watches the
+ * RDY/~BUSY line from the NAND device.
+ */
+COMMAND_HANDLER(handle_at91sam9_rdy_busy_command)
+{
+ struct nand_device *nand = NULL;
+ struct at91sam9_nand *info = NULL;
+ unsigned num, base_pioc, pin_num;
+
+ if (CMD_ARGC != 3) {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num);
+ nand = get_nand_device_by_num(num);
+ if (!nand) {
+ command_print(CMD_CTX, "invalid nand device number: %s", CMD_ARGV[0]);
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+
+ info = nand->controller_priv;
+
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[1], base_pioc);
+ info->busy.pioc = base_pioc;
+
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[2], pin_num);
+ info->busy.num = pin_num;
+
+ return ERROR_OK;
+}
+
+/**
+ * Handle the AT91SAM9 CE command for specifying the pin that is used to enable
+ * or disable the NAND device.
+ */
+COMMAND_HANDLER(handle_at91sam9_ce_command)
+{
+ struct nand_device *nand = NULL;
+ struct at91sam9_nand *info = NULL;
+ unsigned num, base_pioc, pin_num;
+
+ if (CMD_ARGC != 3) {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], num);
+ nand = get_nand_device_by_num(num);
+ if (!nand) {
+ command_print(CMD_CTX, "invalid nand device number: %s", CMD_ARGV[0]);
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+
+ info = nand->controller_priv;
+
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[1], base_pioc);
+ info->ce.pioc = base_pioc;
+
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[2], pin_num);
+ info->ce.num = pin_num;
+
+ return ERROR_OK;
+}
+
+static const struct command_registration at91sam9_sub_command_handlers[] = {
+ {
+ .name = "cle",
+ .handler = handle_at91sam9_cle_command,
+ .mode = COMMAND_CONFIG,
+ .help = "set command latch enable address line (default is 22)",
+ .usage = "<device_id> <address_line>",
+ },
+ {
+ .name = "ale",
+ .handler = handle_at91sam9_ale_command,
+ .mode = COMMAND_CONFIG,
+ .help = "set address latch enable address line (default is 21)",
+ .usage = "<device_id> <address_line>",
+ },
+ {
+ .name = "rdy_busy",
+ .handler = handle_at91sam9_rdy_busy_command,
+ .mode = COMMAND_CONFIG,
+ .help = "set the input pin connected to RDY/~BUSY signal (no default)",
+ .usage = "<device_id> <base_pioc> <pin_num>",
+ },
+ {
+ .name = "ce",
+ .handler = handle_at91sam9_ce_command,
+ .mode = COMMAND_CONFIG,
+ .help = "set the output pin connected to chip enable signal (no default)",
+ .usage = "<device_id> <base_pioc> <pin_num>",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static const struct command_registration at91sam9_command_handler[] = {
+ {
+ .name = "at91sam9",
+ .mode = COMMAND_ANY,
+ .help = "AT91SAM9 NAND flash controller commands",
+ .chain = at91sam9_sub_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+/**
+ * Structure representing the AT91SAM9 NAND controller.
+ */
+struct nand_flash_controller at91sam9_nand_controller = {
+ .name = "at91sam9",
+ .nand_device_command = at91sam9_nand_device_command,
+ .commands = at91sam9_command_handler,
+ .init = at91sam9_init,
+ .command = at91sam9_command,
+ .reset = at91sam9_reset,
+ .address = at91sam9_address,
+ .read_data = at91sam9_read_data,
+ .write_data = at91sam9_write_data,
+ .nand_ready = at91sam9_nand_ready,
+ .read_block_data = at91sam9_read_block_data,
+ .write_block_data = at91sam9_write_block_data,
+ .read_page = at91sam9_read_page,
+ .write_page = at91sam9_write_page,
+};