diff options
Diffstat (limited to 'src/flash/nand/arm_io.c')
-rw-r--r-- | src/flash/nand/arm_io.c | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/src/flash/nand/arm_io.c b/src/flash/nand/arm_io.c new file mode 100644 index 00000000..cc565dcb --- /dev/null +++ b/src/flash/nand/arm_io.c @@ -0,0 +1,246 @@ +/* + * Copyright (C) 2009 by Marvell Semiconductors, Inc. + * Written by Nicolas Pitre <nico at marvell.com> + * + * Copyright (C) 2009 by David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "arm_io.h" +#include <target/armv4_5.h> +#include <target/algorithm.h> + +/** + * Copies code to a working area. This will allocate room for the code plus the + * additional amount requested if the working area pointer is null. + * + * @param target Pointer to the target to copy code to + * @param code Pointer to the code area to be copied + * @param code_size Size of the code being copied + * @param additional Size of the additional area to be allocated in addition to + * code + * @param area Pointer to a pointer to a working area to copy code to + * @return Success or failure of the operation + */ +int arm_code_to_working_area(struct target *target, + const uint32_t *code, unsigned code_size, + unsigned additional, struct working_area **area) +{ + uint8_t code_buf[code_size]; + unsigned i; + int retval; + unsigned size = code_size + additional; + + /* REVISIT this assumes size doesn't ever change. + * That's usually correct; but there are boards with + * both large and small page chips, where it won't be... + */ + + /* make sure we have a working area */ + if (NULL == *area) { + retval = target_alloc_working_area(target, size, area); + if (retval != ERROR_OK) { + LOG_DEBUG("%s: no %d byte buffer", __FUNCTION__, (int) size); + return ERROR_NAND_NO_BUFFER; + } + } + + /* buffer code in target endianness */ + for (i = 0; i < code_size / 4; i++) + target_buffer_set_u32(target, code_buf + i * 4, code[i]); + + /* copy code to work area */ + retval = target_write_memory(target, (*area)->address, + 4, code_size / 4, code_buf); + + return retval; +} + +/** + * ARM-specific bulk write from buffer to address of 8-bit wide NAND. + * For now this only supports ARMv4 and ARMv5 cores. + * + * Enhancements to target_run_algorithm() could enable: + * - ARMv6 and ARMv7 cores in ARM mode + * + * Different code fragments could handle: + * - Thumb2 cores like Cortex-M (needs different byteswapping) + * - 16-bit wide data (needs different setup too) + * + * @param nand Pointer to the arm_nand_data struct that defines the I/O + * @param data Pointer to the data to be copied to flash + * @param size Size of the data being copied + * @return Success or failure of the operation + */ +int arm_nandwrite(struct arm_nand_data *nand, uint8_t *data, int size) +{ + struct target *target = nand->target; + struct arm_algorithm algo; + struct arm *armv4_5 = target->arch_info; + struct reg_param reg_params[3]; + uint32_t target_buf; + uint32_t exit = 0; + int retval; + + /* Inputs: + * r0 NAND data address (byte wide) + * r1 buffer address + * r2 buffer length + */ + static const uint32_t code[] = { + 0xe4d13001, /* s: ldrb r3, [r1], #1 */ + 0xe5c03000, /* strb r3, [r0] */ + 0xe2522001, /* subs r2, r2, #1 */ + 0x1afffffb, /* bne s */ + + /* exit: ARMv4 needs hardware breakpoint */ + 0xe1200070, /* e: bkpt #0 */ + }; + + if (nand->op != ARM_NAND_WRITE || !nand->copy_area) { + retval = arm_code_to_working_area(target, code, sizeof(code), + nand->chunk_size, &nand->copy_area); + if (retval != ERROR_OK) { + return retval; + } + } + + nand->op = ARM_NAND_WRITE; + + /* copy data to work area */ + target_buf = nand->copy_area->address + sizeof(code); + retval = target_bulk_write_memory(target, target_buf, size / 4, data); + if (retval == ERROR_OK && (size & 3) != 0) + retval = target_write_memory(target, + target_buf + (size & ~3), + 1, size & 3, data + (size & ~3)); + if (retval != ERROR_OK) + return retval; + + /* set up algorithm and parameters */ + algo.common_magic = ARM_COMMON_MAGIC; + algo.core_mode = ARM_MODE_SVC; + algo.core_state = ARM_STATE_ARM; + + init_reg_param(®_params[0], "r0", 32, PARAM_IN); + init_reg_param(®_params[1], "r1", 32, PARAM_IN); + init_reg_param(®_params[2], "r2", 32, PARAM_IN); + + buf_set_u32(reg_params[0].value, 0, 32, nand->data); + buf_set_u32(reg_params[1].value, 0, 32, target_buf); + buf_set_u32(reg_params[2].value, 0, 32, size); + + /* armv4 must exit using a hardware breakpoint */ + if (armv4_5->is_armv4) + exit = nand->copy_area->address + sizeof(code) - 4; + + /* use alg to write data from work area to NAND chip */ + retval = target_run_algorithm(target, 0, NULL, 3, reg_params, + nand->copy_area->address, exit, 1000, &algo); + if (retval != ERROR_OK) + LOG_ERROR("error executing hosted NAND write"); + + destroy_reg_param(®_params[0]); + destroy_reg_param(®_params[1]); + destroy_reg_param(®_params[2]); + + return retval; +} + +/** + * Uses an on-chip algorithm for an ARM device to read from a NAND device and + * store the data into the host machine's memory. + * + * @param nand Pointer to the arm_nand_data struct that defines the I/O + * @param data Pointer to the data buffer to store the read data + * @param size Amount of data to be stored to the buffer. + * @return Success or failure of the operation + */ +int arm_nandread(struct arm_nand_data *nand, uint8_t *data, uint32_t size) +{ + struct target *target = nand->target; + struct arm_algorithm algo; + struct arm *armv4_5 = target->arch_info; + struct reg_param reg_params[3]; + uint32_t target_buf; + uint32_t exit = 0; + int retval; + + /* Inputs: + * r0 buffer address + * r1 NAND data address (byte wide) + * r2 buffer length + */ + static const uint32_t code[] = { + 0xe5d13000, /* s: ldrb r3, [r1] */ + 0xe4c03001, /* strb r3, [r0], #1 */ + 0xe2522001, /* subs r2, r2, #1 */ + 0x1afffffb, /* bne s */ + + /* exit: ARMv4 needs hardware breakpoint */ + 0xe1200070, /* e: bkpt #0 */ + }; + + /* create the copy area if not yet available */ + if (nand->op != ARM_NAND_READ || !nand->copy_area) { + retval = arm_code_to_working_area(target, code, sizeof(code), + nand->chunk_size, &nand->copy_area); + if (retval != ERROR_OK) { + return retval; + } + } + + nand->op = ARM_NAND_READ; + target_buf = nand->copy_area->address + sizeof(code); + + /* set up algorithm and parameters */ + algo.common_magic = ARM_COMMON_MAGIC; + algo.core_mode = ARM_MODE_SVC; + algo.core_state = ARM_STATE_ARM; + + init_reg_param(®_params[0], "r0", 32, PARAM_IN); + init_reg_param(®_params[1], "r1", 32, PARAM_IN); + init_reg_param(®_params[2], "r2", 32, PARAM_IN); + + buf_set_u32(reg_params[0].value, 0, 32, target_buf); + buf_set_u32(reg_params[1].value, 0, 32, nand->data); + buf_set_u32(reg_params[2].value, 0, 32, size); + + /* armv4 must exit using a hardware breakpoint */ + if (armv4_5->is_armv4) + exit = nand->copy_area->address + sizeof(code) - 4; + + /* use alg to write data from NAND chip to work area */ + retval = target_run_algorithm(target, 0, NULL, 3, reg_params, + nand->copy_area->address, exit, 1000, &algo); + if (retval != ERROR_OK) + LOG_ERROR("error executing hosted NAND read"); + + destroy_reg_param(®_params[0]); + destroy_reg_param(®_params[1]); + destroy_reg_param(®_params[2]); + + /* read from work area to the host's memory */ + retval = target_read_buffer(target, target_buf, size, data); + + return retval; +} + |