diff options
Diffstat (limited to 'src/flash/at91sam7.c')
-rw-r--r-- | src/flash/at91sam7.c | 1957 |
1 files changed, 976 insertions, 981 deletions
diff --git a/src/flash/at91sam7.c b/src/flash/at91sam7.c index f552900d..3e920e3d 100644 --- a/src/flash/at91sam7.c +++ b/src/flash/at91sam7.c @@ -1,981 +1,976 @@ -/*************************************************************************** - * Copyright (C) 2006 by Magnus Lundin * - * lundin@mlu.mine.nu * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - ***************************************************************************/ - -/*************************************************************************** -There are some things to notice - -* AT91SAM7S64 is tested -* All AT91SAM7Sxx and AT91SAM7Xxx should work but is not tested -* All parameters are identified from onchip configuartion registers -* -* The flash controller handles erases automatically on a page (128/265 byte) basis -* Only an EraseAll command is supported by the controller -* Partial erases can be implemented in software by writing one 0xFFFFFFFF word to -* some location in every page in the region to be erased -* -* Lock regions (sectors) are 32 or 64 pages -* - ***************************************************************************/ -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "replacements.h" - -#include "at91sam7.h" - -#include "flash.h" -#include "target.h" -#include "log.h" -#include "binarybuffer.h" -#include "types.h" - -#include <stdlib.h> -#include <string.h> -#include <unistd.h> - -int at91sam7_register_commands(struct command_context_s *cmd_ctx); -int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank); -int at91sam7_erase(struct flash_bank_s *bank, int first, int last); -int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last); -int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count); -int at91sam7_probe(struct flash_bank_s *bank); -int at91sam7_auto_probe(struct flash_bank_s *bank); -int at91sam7_erase_check(struct flash_bank_s *bank); -int at91sam7_protect_check(struct flash_bank_s *bank); -int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size); - -u32 at91sam7_get_flash_status(flash_bank_t *bank, u8 flashplane); -void at91sam7_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode); -u32 at91sam7_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout); -int at91sam7_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen); -int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); - -flash_driver_t at91sam7_flash = -{ - .name = "at91sam7", - .register_commands = at91sam7_register_commands, - .flash_bank_command = at91sam7_flash_bank_command, - .erase = at91sam7_erase, - .protect = at91sam7_protect, - .write = at91sam7_write, - .probe = at91sam7_probe, - .auto_probe = at91sam7_auto_probe, - .erase_check = at91sam7_erase_check, - .protect_check = at91sam7_protect_check, - .info = at91sam7_info -}; - -u32 MC_FMR[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 }; -u32 MC_FCR[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 }; -u32 MC_FSR[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 }; - -char * EPROC[8]= {"Unknown","ARM946-E","ARM7TDMI","Unknown","ARM920T","ARM926EJ-S","Unknown","Unknown"}; -long NVPSIZ[16] = { - 0, - 0x2000, /* 8K */ - 0x4000, /* 16K */ - 0x8000, /* 32K */ - -1, - 0x10000, /* 64K */ - -1, - 0x20000, /* 128K */ - -1, - 0x40000, /* 256K */ - 0x80000, /* 512K */ - -1, - 0x100000, /* 1024K */ - -1, - 0x200000, /* 2048K */ - -1 -}; - -long SRAMSIZ[16] = { - -1, - 0x0400, /* 1K */ - 0x0800, /* 2K */ - -1, - 0x1c000, /* 112K */ - 0x1000, /* 4K */ - 0x14000, /* 80K */ - 0x28000, /* 160K */ - 0x2000, /* 8K */ - 0x4000, /* 16K */ - 0x8000, /* 32K */ - 0x10000, /* 64K */ - 0x20000, /* 128K */ - 0x40000, /* 256K */ - 0x18000, /* 96K */ - 0x80000, /* 512K */ -}; - -int at91sam7_register_commands(struct command_context_s *cmd_ctx) -{ - command_t *at91sam7_cmd = register_command(cmd_ctx, NULL, "at91sam7", NULL, COMMAND_ANY, NULL); - register_command(cmd_ctx, at91sam7_cmd, "gpnvm", at91sam7_handle_gpnvm_command, COMMAND_EXEC, - "at91sam7 gpnvm <num> <bit> set|clear, set or clear at91sam7 gpnvm bit"); - - return ERROR_OK; -} - -u32 at91sam7_get_flash_status(flash_bank_t *bank, u8 flashplane) -{ - target_t *target = bank->target; - u32 fsr; - - target_read_u32(target, MC_FSR[flashplane], &fsr); - - return fsr; -} - -/** Read clock configuration and set at91sam7_info->usec_clocks*/ -void at91sam7_read_clock_info(flash_bank_t *bank) -{ - at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv; - target_t *target = bank->target; - u32 mckr, mcfr, pllr; - unsigned long tmp = 0, mainfreq; - int flashplane; - - /* Read main clock freqency register */ - target_read_u32(target, CKGR_MCFR, &mcfr); - /* Read master clock register */ - target_read_u32(target, PMC_MCKR, &mckr); - /* Read Clock Generator PLL Register */ - target_read_u32(target, CKGR_PLLR, &pllr); - - at91sam7_info->mck_valid = 0; - switch (mckr & PMC_MCKR_CSS) - { - case 0: /* Slow Clock */ - at91sam7_info->mck_valid = 1; - mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff); - tmp = mainfreq; - break; - case 1: /* Main Clock */ - if (mcfr & CKGR_MCFR_MAINRDY) - { - at91sam7_info->mck_valid = 1; - mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff); - tmp = mainfreq; - } - break; - - case 2: /* Reserved */ - break; - case 3: /* PLL Clock */ - if (mcfr & CKGR_MCFR_MAINRDY) - { - target_read_u32(target, CKGR_PLLR, &pllr); - if (!(pllr & CKGR_PLLR_DIV)) - break; /* 0 Hz */ - at91sam7_info->mck_valid = 1; - mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff); - /* Integer arithmetic should have sufficient precision - as long as PLL is properly configured. */ - tmp = mainfreq / (pllr & CKGR_PLLR_DIV) * - (((pllr & CKGR_PLLR_MUL) >> 16) + 1); - } - break; - } - - /* Prescaler adjust */ - if (((mckr & PMC_MCKR_PRES) >> 2) == 7) - at91sam7_info->mck_valid = 0; - else - at91sam7_info->mck_freq = tmp >> ((mckr & PMC_MCKR_PRES) >> 2); - - /* Forget old flash timing */ - for (flashplane = 0; flashplane<at91sam7_info->num_planes; flashplane++) - { - at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_NONE); - } -} - -/* Setup the timimg registers for nvbits or normal flash */ -void at91sam7_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode) -{ - u32 fmr, fmcn = 0, fws = 0; - at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv; - target_t *target = bank->target; - - if (mode && (mode != at91sam7_info->flashmode[flashplane])) - { - /* Always round up (ceil) */ - if (mode==FMR_TIMING_NVBITS) - { - if (at91sam7_info->cidr_arch == 0x60) - { - /* AT91SAM7A3 uses master clocks in 100 ns */ - fmcn = (at91sam7_info->mck_freq/10000000ul)+1; - } - else - { - /* master clocks in 1uS for ARCH 0x7 types */ - fmcn = (at91sam7_info->mck_freq/1000000ul)+1; - } - } - else if (mode==FMR_TIMING_FLASH) - /* main clocks in 1.5uS */ - fmcn = (at91sam7_info->mck_freq/666666ul)+1; - - /* Only allow fmcn=0 if clock period is > 30 us = 33kHz. */ - if (at91sam7_info->mck_freq <= 33333ul) - fmcn = 0; - /* Only allow fws=0 if clock frequency is < 30 MHz. */ - if (at91sam7_info->mck_freq > 30000000ul) - fws = 1; - - DEBUG("fmcn[%i]: %i", flashplane, fmcn); - fmr = fmcn << 16 | fws << 8; - target_write_u32(target, MC_FMR[flashplane], fmr); - } - - at91sam7_info->flashmode[flashplane] = mode; -} - -u32 at91sam7_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout) -{ - u32 status; - - while ((!((status = at91sam7_get_flash_status(bank,flashplane)) & waitbits)) && (timeout-- > 0)) - { - DEBUG("status[%i]: 0x%x", flashplane, status); - usleep(1000); - } - - DEBUG("status[%i]: 0x%x", flashplane, status); - - if (status & 0x0C) - { - ERROR("status register: 0x%x", status); - if (status & 0x4) - ERROR("Lock Error Bit Detected, Operation Abort"); - if (status & 0x8) - ERROR("Invalid command and/or bad keyword, Operation Abort"); - if (status & 0x10) - ERROR("Security Bit Set, Operation Abort"); - } - - return status; -} - - -/* Send one command to the AT91SAM flash controller */ -int at91sam7_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen) -{ - u32 fcr; - at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv; - target_t *target = bank->target; - - fcr = (0x5A<<24) | ((pagen&0x3FF)<<8) | cmd; - target_write_u32(target, MC_FCR[flashplane], fcr); - DEBUG("Flash command: 0x%x, flashplane: %i, pagenumber:%u", fcr, flashplane, pagen); - - if ((at91sam7_info->cidr_arch == 0x60)&&((cmd==SLB)|(cmd==CLB))) - { - /* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */ - if (at91sam7_wait_status_busy(bank, flashplane, MC_FSR_EOL, 10)&0x0C) - { - return ERROR_FLASH_OPERATION_FAILED; - } - return ERROR_OK; - } - - if (at91sam7_wait_status_busy(bank, flashplane, MC_FSR_FRDY, 10)&0x0C) - { - return ERROR_FLASH_OPERATION_FAILED; - } - return ERROR_OK; -} - -/* Read device id register, main clock frequency register and fill in driver info structure */ -int at91sam7_read_part_info(struct flash_bank_s *bank) -{ - at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv; - target_t *target = bank->target; - u32 cidr, status; - int sectornum; - - if (bank->target->state != TARGET_HALTED) - { - return ERROR_TARGET_NOT_HALTED; - } - - /* Read and parse chip identification register */ - target_read_u32(target, DBGU_CIDR, &cidr); - - if (cidr == 0) - { - WARNING("Cannot identify target as an AT91SAM"); - return ERROR_FLASH_OPERATION_FAILED; - } - - at91sam7_info->cidr = cidr; - at91sam7_info->cidr_ext = (cidr>>31)&0x0001; - at91sam7_info->cidr_nvptyp = (cidr>>28)&0x0007; - at91sam7_info->cidr_arch = (cidr>>20)&0x00FF; - at91sam7_info->cidr_sramsiz = (cidr>>16)&0x000F; - at91sam7_info->cidr_nvpsiz2 = (cidr>>12)&0x000F; - at91sam7_info->cidr_nvpsiz = (cidr>>8)&0x000F; - at91sam7_info->cidr_eproc = (cidr>>5)&0x0007; - at91sam7_info->cidr_version = cidr&0x001F; - bank->size = NVPSIZ[at91sam7_info->cidr_nvpsiz]; - at91sam7_info->target_name = "Unknown"; - - /* Support just for bulk erase of a single flash plane, whole device if flash size <= 256k */ - if (NVPSIZ[at91sam7_info->cidr_nvpsiz]<0x80000) /* Flash size less than 512K, one flash plane */ - { - bank->num_sectors = 1; - bank->sectors = malloc(sizeof(flash_sector_t)); - bank->sectors[0].offset = 0; - bank->sectors[0].size = bank->size; - bank->sectors[0].is_erased = -1; - bank->sectors[0].is_protected = -1; - } - else /* Flash size 512K or larger, several flash planes */ - { - bank->num_sectors = NVPSIZ[at91sam7_info->cidr_nvpsiz]/0x40000; - bank->sectors = malloc(bank->num_sectors*sizeof(flash_sector_t)); - for (sectornum=0; sectornum<bank->num_sectors; sectornum++) - { - bank->sectors[sectornum].offset = sectornum*0x40000; - bank->sectors[sectornum].size = 0x40000; - bank->sectors[sectornum].is_erased = -1; - bank->sectors[sectornum].is_protected = -1; - } - } - - - - DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", at91sam7_info->cidr_nvptyp, at91sam7_info->cidr_arch ); - - /* Read main and master clock freqency register */ - at91sam7_read_clock_info(bank); - - at91sam7_info->num_planes = 1; - status = at91sam7_get_flash_status(bank, 0); - at91sam7_info->securitybit = (status>>4)&0x01; - at91sam7_protect_check(bank); /* TODO Check the protect check */ - - if (at91sam7_info->cidr_arch == 0x70 ) - { - at91sam7_info->num_nvmbits = 2; - at91sam7_info->nvmbits = (status>>8)&0x03; - bank->base = 0x100000; - bank->bus_width = 4; - if (bank->size==0x80000) /* AT91SAM7S512 */ - { - at91sam7_info->target_name = "AT91SAM7S512"; - at91sam7_info->num_planes = 2; - if (at91sam7_info->num_planes != bank->num_sectors) - WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");; - at91sam7_info->num_lockbits = 2*16; - at91sam7_info->pagesize = 256; - at91sam7_info->pages_in_lockregion = 64; - at91sam7_info->num_pages = 2*16*64; - } - if (bank->size==0x40000) /* AT91SAM7S256 */ - { - at91sam7_info->target_name = "AT91SAM7S256"; - at91sam7_info->num_lockbits = 16; - at91sam7_info->pagesize = 256; - at91sam7_info->pages_in_lockregion = 64; - at91sam7_info->num_pages = 16*64; - } - if (bank->size==0x20000) /* AT91SAM7S128 */ - { - at91sam7_info->target_name = "AT91SAM7S128"; - at91sam7_info->num_lockbits = 8; - at91sam7_info->pagesize = 256; - at91sam7_info->pages_in_lockregion = 64; - at91sam7_info->num_pages = 8*64; - } - if (bank->size==0x10000) /* AT91SAM7S64 */ - { - at91sam7_info->target_name = "AT91SAM7S64"; - at91sam7_info->num_lockbits = 16; - at91sam7_info->pagesize = 128; - at91sam7_info->pages_in_lockregion = 32; - at91sam7_info->num_pages = 16*32; - } - if (bank->size==0x08000) /* AT91SAM7S321/32 */ - { - at91sam7_info->target_name = "AT91SAM7S321/32"; - at91sam7_info->num_lockbits = 8; - at91sam7_info->pagesize = 128; - at91sam7_info->pages_in_lockregion = 32; - at91sam7_info->num_pages = 8*32; - } - - return ERROR_OK; - } - - if (at91sam7_info->cidr_arch == 0x71 ) - { - at91sam7_info->num_nvmbits = 3; - at91sam7_info->nvmbits = (status>>8)&0x07; - bank->base = 0x100000; - bank->bus_width = 4; - if (bank->size==0x80000) /* AT91SAM7XC512 */ - { - at91sam7_info->target_name = "AT91SAM7XC512"; - at91sam7_info->num_planes = 2; - if (at91sam7_info->num_planes != bank->num_sectors) - WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");; - at91sam7_info->num_lockbits = 2*16; - at91sam7_info->pagesize = 256; - at91sam7_info->pages_in_lockregion = 64; - at91sam7_info->num_pages = 2*16*64; - } - if (bank->size==0x40000) /* AT91SAM7XC256 */ - { - at91sam7_info->target_name = "AT91SAM7XC256"; - at91sam7_info->num_lockbits = 16; - at91sam7_info->pagesize = 256; - at91sam7_info->pages_in_lockregion = 64; - at91sam7_info->num_pages = 16*64; - } - if (bank->size==0x20000) /* AT91SAM7XC128 */ - { - at91sam7_info->target_name = "AT91SAM7XC128"; - at91sam7_info->num_lockbits = 8; - at91sam7_info->pagesize = 256; - at91sam7_info->pages_in_lockregion = 64; - at91sam7_info->num_pages = 8*64; - } - - return ERROR_OK; - } - - if (at91sam7_info->cidr_arch == 0x72 ) - { - at91sam7_info->num_nvmbits = 3; - at91sam7_info->nvmbits = (status>>8)&0x07; - bank->base = 0x100000; - bank->bus_width = 4; - if (bank->size==0x80000) /* AT91SAM7SE512 */ - { - at91sam7_info->target_name = "AT91SAM7SE512"; - at91sam7_info->num_planes = 2; - if (at91sam7_info->num_planes != bank->num_sectors) - WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");; - at91sam7_info->num_lockbits = 32; - at91sam7_info->pagesize = 256; - at91sam7_info->pages_in_lockregion = 64; - at91sam7_info->num_pages = 32*64; - } - if (bank->size==0x40000) - { - at91sam7_info->target_name = "AT91SAM7SE256"; - at91sam7_info->num_lockbits = 16; - at91sam7_info->pagesize = 256; - at91sam7_info->pages_in_lockregion = 64; - at91sam7_info->num_pages = 16*64; - } - if (bank->size==0x08000) - { - at91sam7_info->target_name = "AT91SAM7SE32"; - at91sam7_info->num_lockbits = 8; - at91sam7_info->pagesize = 128; - at91sam7_info->pages_in_lockregion = 32; - at91sam7_info->num_pages = 8*32; - } - - return ERROR_OK; - } - - if (at91sam7_info->cidr_arch == 0x75 ) - { - at91sam7_info->num_nvmbits = 3; - at91sam7_info->nvmbits = (status>>8)&0x07; - bank->base = 0x100000; - bank->bus_width = 4; - if (bank->size==0x80000) /* AT91SAM7X512 */ - { - at91sam7_info->target_name = "AT91SAM7X512"; - at91sam7_info->num_planes = 2; - if (at91sam7_info->num_planes != bank->num_sectors) - WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");; - at91sam7_info->num_lockbits = 32; - at91sam7_info->pagesize = 256; - at91sam7_info->pages_in_lockregion = 64; - at91sam7_info->num_pages = 2*16*64; - DEBUG("Support for AT91SAM7X512 is experimental in this version!"); - } - if (bank->size==0x40000) /* AT91SAM7X256 */ - { - at91sam7_info->target_name = "AT91SAM7X256"; - at91sam7_info->num_lockbits = 16; - at91sam7_info->pagesize = 256; - at91sam7_info->pages_in_lockregion = 64; - at91sam7_info->num_pages = 16*64; - } - if (bank->size==0x20000) /* AT91SAM7X128 */ - { - at91sam7_info->target_name = "AT91SAM7X128"; - at91sam7_info->num_lockbits = 8; - at91sam7_info->pagesize = 256; - at91sam7_info->pages_in_lockregion = 64; - at91sam7_info->num_pages = 8*64; - } - - return ERROR_OK; - } - - if (at91sam7_info->cidr_arch == 0x60 ) - { - at91sam7_info->num_nvmbits = 3; - at91sam7_info->nvmbits = (status>>8)&0x07; - bank->base = 0x100000; - bank->bus_width = 4; - - if (bank->size == 0x40000) /* AT91SAM7A3 */ - { - at91sam7_info->target_name = "AT91SAM7A3"; - at91sam7_info->num_lockbits = 16; - at91sam7_info->pagesize = 256; - at91sam7_info->pages_in_lockregion = 16; - at91sam7_info->num_pages = 16*64; - } - return ERROR_OK; - } - - WARNING("at91sam7 flash only tested for AT91SAM7Sxx series"); - - return ERROR_OK; -} - -int at91sam7_erase_check(struct flash_bank_s *bank) -{ - at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv; - - if (!at91sam7_info->working_area_size) - { - } - else - { - } - - return ERROR_OK; -} - -int at91sam7_protect_check(struct flash_bank_s *bank) -{ - u32 status; - int flashplane; - - at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv; - - if (at91sam7_info->cidr == 0) - { - at91sam7_read_part_info(bank); - } - - if (at91sam7_info->cidr == 0) - { - WARNING("Cannot identify target as an AT91SAM"); - return ERROR_FLASH_OPERATION_FAILED; - } - - for (flashplane=0;flashplane<at91sam7_info->num_planes;flashplane++) - { - status = at91sam7_get_flash_status(bank, flashplane); - at91sam7_info->lockbits[flashplane] = (status >> 16); - } - - return ERROR_OK; -} - -/* flash_bank at91sam7 0 0 0 0 <target#> - */ -int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank) -{ - at91sam7_flash_bank_t *at91sam7_info; - int i; - - if (argc < 6) - { - WARNING("incomplete flash_bank at91sam7 configuration"); - return ERROR_FLASH_BANK_INVALID; - } - - at91sam7_info = malloc(sizeof(at91sam7_flash_bank_t)); - bank->driver_priv = at91sam7_info; - at91sam7_info->probed = 0; - - /* part wasn't probed for info yet */ - at91sam7_info->cidr = 0; - for (i=0;i<4;i++) - at91sam7_info->flashmode[i]=0; - - return ERROR_OK; -} - -int at91sam7_erase(struct flash_bank_s *bank, int first, int last) -{ - at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv; - u8 flashplane; - - if (bank->target->state != TARGET_HALTED) - { - return ERROR_TARGET_NOT_HALTED; - } - - if (at91sam7_info->cidr == 0) - { - at91sam7_read_part_info(bank); - } - - if (at91sam7_info->cidr == 0) - { - WARNING("Cannot identify target as an AT91SAM"); - return ERROR_FLASH_OPERATION_FAILED; - } - - if ((first < 0) || (last < first) || (last >= bank->num_sectors)) - { - if ((first == 0) && (last == (at91sam7_info->num_lockbits-1))) - { - WARNING("Sector numbers based on lockbit count, probably a deprecated script"); - last = bank->num_sectors-1; - } - else return ERROR_FLASH_SECTOR_INVALID; - } - - /* Configure the flash controller timing */ - at91sam7_read_clock_info(bank); - for (flashplane = first; flashplane<=last; flashplane++) - { - /* Configure the flash controller timing */ - at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH); - if (at91sam7_flash_command(bank, flashplane, EA, 0) != ERROR_OK) - { - return ERROR_FLASH_OPERATION_FAILED; - } - } - return ERROR_OK; - -} - -int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last) -{ - u32 cmd, pagen; - u8 flashplane; - int lockregion; - - at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv; - - if (bank->target->state != TARGET_HALTED) - { - return ERROR_TARGET_NOT_HALTED; - } - - if ((first < 0) || (last < first) || (last >= at91sam7_info->num_lockbits)) - { - return ERROR_FLASH_SECTOR_INVALID; - } - - if (at91sam7_info->cidr == 0) - { - at91sam7_read_part_info(bank); - } - - if (at91sam7_info->cidr == 0) - { - WARNING("Cannot identify target as an AT91SAM"); - return ERROR_FLASH_OPERATION_FAILED; - } - - at91sam7_read_clock_info(bank); - - for (lockregion=first;lockregion<=last;lockregion++) - { - pagen = lockregion*at91sam7_info->pages_in_lockregion; - flashplane = (pagen>>10)&0x03; - /* Configure the flash controller timing */ - at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_NVBITS); - - if (set) - cmd = SLB; - else - cmd = CLB; - - if (at91sam7_flash_command(bank, flashplane, cmd, pagen) != ERROR_OK) - { - return ERROR_FLASH_OPERATION_FAILED; - } - } - - at91sam7_protect_check(bank); - - return ERROR_OK; -} - - -int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count) -{ - at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv; - target_t *target = bank->target; - u32 dst_min_alignment, wcount, bytes_remaining = count; - u32 first_page, last_page, pagen, buffer_pos; - u8 flashplane; - - if (bank->target->state != TARGET_HALTED) - { - return ERROR_TARGET_NOT_HALTED; - } - - if (at91sam7_info->cidr == 0) - { - at91sam7_read_part_info(bank); - } - - if (at91sam7_info->cidr == 0) - { - WARNING("Cannot identify target as an AT91SAM"); - return ERROR_FLASH_OPERATION_FAILED; - } - - if (offset + count > bank->size) - return ERROR_FLASH_DST_OUT_OF_BANK; - - dst_min_alignment = at91sam7_info->pagesize; - - if (offset % dst_min_alignment) - { - WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment); - return ERROR_FLASH_DST_BREAKS_ALIGNMENT; - } - - if (at91sam7_info->cidr_arch == 0) - return ERROR_FLASH_BANK_NOT_PROBED; - - first_page = offset/dst_min_alignment; - last_page = CEIL(offset + count, dst_min_alignment); - - DEBUG("first_page: %i, last_page: %i, count %i", first_page, last_page, count); - - at91sam7_read_clock_info(bank); - - for (pagen=first_page; pagen<last_page; pagen++) - { - if (bytes_remaining<dst_min_alignment) - count = bytes_remaining; - else - count = dst_min_alignment; - bytes_remaining -= count; - - /* Write one block to the PageWriteBuffer */ - buffer_pos = (pagen-first_page)*dst_min_alignment; - wcount = CEIL(count,4); - target->type->write_memory(target, bank->base+pagen*dst_min_alignment, 4, wcount, buffer+buffer_pos); - flashplane = (pagen>>10)&0x3; - - /* Configure the flash controller timing */ - at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH); - /* Send Write Page command to Flash Controller */ - if (at91sam7_flash_command(bank, flashplane, WP, pagen) != ERROR_OK) - { - return ERROR_FLASH_OPERATION_FAILED; - } - DEBUG("Write flash plane:%i page number:%i", flashplane, pagen); - } - - return ERROR_OK; -} - - -int at91sam7_probe(struct flash_bank_s *bank) -{ - /* we can't probe on an at91sam7 - * if this is an at91sam7, it has the configured flash - */ - at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv; - at91sam7_info->probed = 0; - - if (at91sam7_info->cidr == 0) - { - at91sam7_read_part_info(bank); - } - - if (at91sam7_info->cidr == 0) - { - WARNING("Cannot identify target as an AT91SAM"); - return ERROR_FLASH_OPERATION_FAILED; - } - - at91sam7_info->probed = 1; - - return ERROR_OK; -} - - -int at91sam7_auto_probe(struct flash_bank_s *bank) -{ - at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv; - if (at91sam7_info->probed) - return ERROR_OK; - return at91sam7_probe(bank); -} - -int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size) -{ - int printed, flashplane; - at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv; - - at91sam7_read_part_info(bank); - - if (at91sam7_info->cidr == 0) - { - printed = snprintf(buf, buf_size, "Cannot identify target as an AT91SAM\n"); - buf += printed; - buf_size -= printed; - return ERROR_FLASH_OPERATION_FAILED; - } - - printed = snprintf(buf, buf_size, "\nat91sam7 information: Chip is %s\n",at91sam7_info->target_name); - buf += printed; - buf_size -= printed; - - printed = snprintf(buf, buf_size, "cidr: 0x%8.8x, arch: 0x%4.4x, eproc: %s, version:0x%3.3x, flashsize: 0x%8.8x\n", - at91sam7_info->cidr, at91sam7_info->cidr_arch, EPROC[at91sam7_info->cidr_eproc], at91sam7_info->cidr_version, bank->size); - buf += printed; - buf_size -= printed; - - printed = snprintf(buf, buf_size, "master clock(estimated): %ikHz \n", at91sam7_info->mck_freq / 1000); - buf += printed; - buf_size -= printed; - - if (at91sam7_info->num_planes>1) { - printed = snprintf(buf, buf_size, "flashplanes: %i, pagesize: %i, lock regions: %i, pages in lock region: %i \n", - at91sam7_info->num_planes, at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->num_pages/at91sam7_info->num_lockbits); - buf += printed; - buf_size -= printed; - for (flashplane=0; flashplane<at91sam7_info->num_planes; flashplane++) - { - printed = snprintf(buf, buf_size, "lockbits[%i]: 0x%4.4x, ", flashplane, at91sam7_info->lockbits[flashplane]); - buf += printed; - buf_size -= printed; - } - } - else - if (at91sam7_info->num_lockbits>0) { - printed = snprintf(buf, buf_size, "pagesize: %i, lockbits: %i 0x%4.4x, pages in lock region: %i \n", - at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->lockbits[0], at91sam7_info->num_pages/at91sam7_info->num_lockbits); - buf += printed; - buf_size -= printed; - } - - printed = snprintf(buf, buf_size, "securitybit: %i, nvmbits: 0x%1.1x\n", at91sam7_info->securitybit, at91sam7_info->nvmbits); - buf += printed; - buf_size -= printed; - - return ERROR_OK; -} - -/* -* On AT91SAM7S: When the gpnvm bits are set with -* > at91sam7 gpnvm 0 bitnr set -* the changes are not visible in the flash controller status register MC_FSR -* until the processor has been reset. -* On the Olimex board this requires a power cycle. -* Note that the AT91SAM7S has the following errata (doc6175.pdf sec 14.1.3): -* The maximum number of write/erase cycles for Non Volatile Memory bits is 100. This includes -* Lock Bits (LOCKx), General Purpose NVM bits (GPNVMx) and the Security Bit. -*/ -int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) -{ - flash_bank_t *bank; - int bit; - u8 flashcmd; - u32 status; - char *value; - at91sam7_flash_bank_t *at91sam7_info; - - if (argc < 3) - { - command_print(cmd_ctx, "at91sam7 gpnvm <num> <bit> <set|clear>"); - return ERROR_OK; - } - - bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0)); - bit = atoi(args[1]); - value = args[2]; - - if (!bank) - { - command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]); - return ERROR_OK; - } - - at91sam7_info = bank->driver_priv; - - if (bank->target->state != TARGET_HALTED) - { - return ERROR_TARGET_NOT_HALTED; - } - - if (at91sam7_info->cidr == 0) - { - at91sam7_read_part_info(bank); - } - - if (at91sam7_info->cidr == 0) - { - WARNING("Cannot identify target as an AT91SAM"); - return ERROR_FLASH_OPERATION_FAILED; - } - - if ((bit<0) || (at91sam7_info->num_nvmbits <= bit)) - { - command_print(cmd_ctx, "gpnvm bit '#%s' is out of bounds for target %s", args[1],at91sam7_info->target_name); - return ERROR_OK; - } - - if (strcmp(value, "set") == 0) - { - flashcmd = SGPB; - } - else if (strcmp(value, "clear") == 0) - { - flashcmd = CGPB; - } - else - { - command_print(cmd_ctx, "usage: at91sam7 gpnvm <num> <bit> <set|clear>"); - return ERROR_OK; - } - - /* Configure the flash controller timing */ - at91sam7_read_clock_info(bank); - at91sam7_set_flash_mode(bank, 0, FMR_TIMING_NVBITS); - - if (at91sam7_flash_command(bank, 0, flashcmd, (u16)(bit)) != ERROR_OK) - { - return ERROR_FLASH_OPERATION_FAILED; - } - - status = at91sam7_get_flash_status(bank, 0); - DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value 0x%x, status 0x%x \n",flashcmd,bit,status); - at91sam7_info->nvmbits = (status>>8)&((1<<at91sam7_info->num_nvmbits)-1); - - return ERROR_OK; -} +/***************************************************************************
+ * Copyright (C) 2006 by Magnus Lundin *
+ * lundin@mlu.mine.nu *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+/***************************************************************************
+There are some things to notice
+
+* AT91SAM7S64 is tested
+* All AT91SAM7Sxx and AT91SAM7Xxx should work but is not tested
+* All parameters are identified from onchip configuartion registers
+*
+* The flash controller handles erases automatically on a page (128/265 byte) basis
+* Only an EraseAll command is supported by the controller
+* Partial erases can be implemented in software by writing one 0xFFFFFFFF word to
+* some location in every page in the region to be erased
+*
+* Lock regions (sectors) are 32 or 64 pages
+*
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "replacements.h"
+
+#include "at91sam7.h"
+
+#include "flash.h"
+#include "target.h"
+#include "log.h"
+#include "binarybuffer.h"
+#include "types.h"
+
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+int at91sam7_register_commands(struct command_context_s *cmd_ctx);
+int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+int at91sam7_erase(struct flash_bank_s *bank, int first, int last);
+int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last);
+int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
+int at91sam7_probe(struct flash_bank_s *bank);
+int at91sam7_auto_probe(struct flash_bank_s *bank);
+int at91sam7_erase_check(struct flash_bank_s *bank);
+int at91sam7_protect_check(struct flash_bank_s *bank);
+int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size);
+
+u32 at91sam7_get_flash_status(flash_bank_t *bank, u8 flashplane);
+void at91sam7_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode);
+u32 at91sam7_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout);
+int at91sam7_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen);
+int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+flash_driver_t at91sam7_flash =
+{
+ .name = "at91sam7",
+ .register_commands = at91sam7_register_commands,
+ .flash_bank_command = at91sam7_flash_bank_command,
+ .erase = at91sam7_erase,
+ .protect = at91sam7_protect,
+ .write = at91sam7_write,
+ .probe = at91sam7_probe,
+ .auto_probe = at91sam7_auto_probe,
+ .erase_check = at91sam7_erase_check,
+ .protect_check = at91sam7_protect_check,
+ .info = at91sam7_info
+};
+
+u32 MC_FMR[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 };
+u32 MC_FCR[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 };
+u32 MC_FSR[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 };
+
+char * EPROC[8]= {"Unknown","ARM946-E","ARM7TDMI","Unknown","ARM920T","ARM926EJ-S","Unknown","Unknown"};
+long NVPSIZ[16] = {
+ 0,
+ 0x2000, /* 8K */
+ 0x4000, /* 16K */
+ 0x8000, /* 32K */
+ -1,
+ 0x10000, /* 64K */
+ -1,
+ 0x20000, /* 128K */
+ -1,
+ 0x40000, /* 256K */
+ 0x80000, /* 512K */
+ -1,
+ 0x100000, /* 1024K */
+ -1,
+ 0x200000, /* 2048K */
+ -1
+};
+
+long SRAMSIZ[16] = {
+ -1,
+ 0x0400, /* 1K */
+ 0x0800, /* 2K */
+ -1,
+ 0x1c000, /* 112K */
+ 0x1000, /* 4K */
+ 0x14000, /* 80K */
+ 0x28000, /* 160K */
+ 0x2000, /* 8K */
+ 0x4000, /* 16K */
+ 0x8000, /* 32K */
+ 0x10000, /* 64K */
+ 0x20000, /* 128K */
+ 0x40000, /* 256K */
+ 0x18000, /* 96K */
+ 0x80000, /* 512K */
+};
+
+int at91sam7_register_commands(struct command_context_s *cmd_ctx)
+{
+ command_t *at91sam7_cmd = register_command(cmd_ctx, NULL, "at91sam7", NULL, COMMAND_ANY, NULL);
+ register_command(cmd_ctx, at91sam7_cmd, "gpnvm", at91sam7_handle_gpnvm_command, COMMAND_EXEC,
+ "at91sam7 gpnvm <num> <bit> set|clear, set or clear at91sam7 gpnvm bit");
+
+ return ERROR_OK;
+}
+
+u32 at91sam7_get_flash_status(flash_bank_t *bank, u8 flashplane)
+{
+ target_t *target = bank->target;
+ u32 fsr;
+
+ target_read_u32(target, MC_FSR[flashplane], &fsr);
+
+ return fsr;
+}
+
+/** Read clock configuration and set at91sam7_info->usec_clocks*/
+void at91sam7_read_clock_info(flash_bank_t *bank)
+{
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 mckr, mcfr, pllr;
+ unsigned long tmp = 0, mainfreq;
+ int flashplane;
+
+ /* Read main clock freqency register */
+ target_read_u32(target, CKGR_MCFR, &mcfr);
+ /* Read master clock register */
+ target_read_u32(target, PMC_MCKR, &mckr);
+ /* Read Clock Generator PLL Register */
+ target_read_u32(target, CKGR_PLLR, &pllr);
+
+ at91sam7_info->mck_valid = 0;
+ switch (mckr & PMC_MCKR_CSS)
+ {
+ case 0: /* Slow Clock */
+ at91sam7_info->mck_valid = 1;
+ mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
+ tmp = mainfreq;
+ break;
+ case 1: /* Main Clock */
+ if (mcfr & CKGR_MCFR_MAINRDY)
+ {
+ at91sam7_info->mck_valid = 1;
+ mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
+ tmp = mainfreq;
+ }
+ break;
+
+ case 2: /* Reserved */
+ break;
+ case 3: /* PLL Clock */
+ if (mcfr & CKGR_MCFR_MAINRDY)
+ {
+ target_read_u32(target, CKGR_PLLR, &pllr);
+ if (!(pllr & CKGR_PLLR_DIV))
+ break; /* 0 Hz */
+ at91sam7_info->mck_valid = 1;
+ mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
+ /* Integer arithmetic should have sufficient precision
+ as long as PLL is properly configured. */
+ tmp = mainfreq / (pllr & CKGR_PLLR_DIV) *
+ (((pllr & CKGR_PLLR_MUL) >> 16) + 1);
+ }
+ break;
+ }
+
+ /* Prescaler adjust */
+ if (((mckr & PMC_MCKR_PRES) >> 2) == 7)
+ at91sam7_info->mck_valid = 0;
+ else
+ at91sam7_info->mck_freq = tmp >> ((mckr & PMC_MCKR_PRES) >> 2);
+
+ /* Forget old flash timing */
+ for (flashplane = 0; flashplane<at91sam7_info->num_planes; flashplane++)
+ {
+ at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_NONE);
+ }
+}
+
+/* Setup the timimg registers for nvbits or normal flash */
+void at91sam7_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode)
+{
+ u32 fmr, fmcn = 0, fws = 0;
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ if (mode && (mode != at91sam7_info->flashmode[flashplane]))
+ {
+ /* Always round up (ceil) */
+ if (mode==FMR_TIMING_NVBITS)
+ {
+ if (at91sam7_info->cidr_arch == 0x60)
+ {
+ /* AT91SAM7A3 uses master clocks in 100 ns */
+ fmcn = (at91sam7_info->mck_freq/10000000ul)+1;
+ }
+ else
+ {
+ /* master clocks in 1uS for ARCH 0x7 types */
+ fmcn = (at91sam7_info->mck_freq/1000000ul)+1;
+ }
+ }
+ else if (mode==FMR_TIMING_FLASH)
+ /* main clocks in 1.5uS */
+ fmcn = (at91sam7_info->mck_freq/666666ul)+1;
+
+ /* Only allow fmcn=0 if clock period is > 30 us = 33kHz. */
+ if (at91sam7_info->mck_freq <= 33333ul)
+ fmcn = 0;
+ /* Only allow fws=0 if clock frequency is < 30 MHz. */
+ if (at91sam7_info->mck_freq > 30000000ul)
+ fws = 1;
+
+ DEBUG("fmcn[%i]: %i", flashplane, fmcn);
+ fmr = fmcn << 16 | fws << 8;
+ target_write_u32(target, MC_FMR[flashplane], fmr);
+ }
+
+ at91sam7_info->flashmode[flashplane] = mode;
+}
+
+u32 at91sam7_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout)
+{
+ u32 status;
+
+ while ((!((status = at91sam7_get_flash_status(bank,flashplane)) & waitbits)) && (timeout-- > 0))
+ {
+ DEBUG("status[%i]: 0x%x", flashplane, status);
+ usleep(1000);
+ }
+
+ DEBUG("status[%i]: 0x%x", flashplane, status);
+
+ if (status & 0x0C)
+ {
+ ERROR("status register: 0x%x", status);
+ if (status & 0x4)
+ ERROR("Lock Error Bit Detected, Operation Abort");
+ if (status & 0x8)
+ ERROR("Invalid command and/or bad keyword, Operation Abort");
+ if (status & 0x10)
+ ERROR("Security Bit Set, Operation Abort");
+ }
+
+ return status;
+}
+
+
+/* Send one command to the AT91SAM flash controller */
+int at91sam7_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen)
+{
+ u32 fcr;
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ fcr = (0x5A<<24) | ((pagen&0x3FF)<<8) | cmd;
+ target_write_u32(target, MC_FCR[flashplane], fcr);
+ DEBUG("Flash command: 0x%x, flashplane: %i, pagenumber:%u", fcr, flashplane, pagen);
+
+ if ((at91sam7_info->cidr_arch == 0x60)&&((cmd==SLB)|(cmd==CLB)))
+ {
+ /* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */
+ if (at91sam7_wait_status_busy(bank, flashplane, MC_FSR_EOL, 10)&0x0C)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ return ERROR_OK;
+ }
+
+ if (at91sam7_wait_status_busy(bank, flashplane, MC_FSR_FRDY, 10)&0x0C)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ return ERROR_OK;
+}
+
+/* Read device id register, main clock frequency register and fill in driver info structure */
+int at91sam7_read_part_info(struct flash_bank_s *bank)
+{
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 cidr, status;
+ int sectornum;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* Read and parse chip identification register */
+ target_read_u32(target, DBGU_CIDR, &cidr);
+
+ if (cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ at91sam7_info->cidr = cidr;
+ at91sam7_info->cidr_ext = (cidr>>31)&0x0001;
+ at91sam7_info->cidr_nvptyp = (cidr>>28)&0x0007;
+ at91sam7_info->cidr_arch = (cidr>>20)&0x00FF;
+ at91sam7_info->cidr_sramsiz = (cidr>>16)&0x000F;
+ at91sam7_info->cidr_nvpsiz2 = (cidr>>12)&0x000F;
+ at91sam7_info->cidr_nvpsiz = (cidr>>8)&0x000F;
+ at91sam7_info->cidr_eproc = (cidr>>5)&0x0007;
+ at91sam7_info->cidr_version = cidr&0x001F;
+ bank->size = NVPSIZ[at91sam7_info->cidr_nvpsiz];
+ at91sam7_info->target_name = "Unknown";
+
+ /* Support just for bulk erase of a single flash plane, whole device if flash size <= 256k */
+ if (NVPSIZ[at91sam7_info->cidr_nvpsiz]<0x80000) /* Flash size less than 512K, one flash plane */
+ {
+ bank->num_sectors = 1;
+ bank->sectors = malloc(sizeof(flash_sector_t));
+ bank->sectors[0].offset = 0;
+ bank->sectors[0].size = bank->size;
+ bank->sectors[0].is_erased = -1;
+ bank->sectors[0].is_protected = -1;
+ }
+ else /* Flash size 512K or larger, several flash planes */
+ {
+ bank->num_sectors = NVPSIZ[at91sam7_info->cidr_nvpsiz]/0x40000;
+ bank->sectors = malloc(bank->num_sectors*sizeof(flash_sector_t));
+ for (sectornum=0; sectornum<bank->num_sectors; sectornum++)
+ {
+ bank->sectors[sectornum].offset = sectornum*0x40000;
+ bank->sectors[sectornum].size = 0x40000;
+ bank->sectors[sectornum].is_erased = -1;
+ bank->sectors[sectornum].is_protected = -1;
+ }
+ }
+
+
+
+ DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", at91sam7_info->cidr_nvptyp, at91sam7_info->cidr_arch );
+
+ /* Read main and master clock freqency register */
+ at91sam7_read_clock_info(bank);
+
+ at91sam7_info->num_planes = 1;
+ status = at91sam7_get_flash_status(bank, 0);
+ at91sam7_info->securitybit = (status>>4)&0x01;
+ at91sam7_protect_check(bank); /* TODO Check the protect check */
+
+ if (at91sam7_info->cidr_arch == 0x70 )
+ {
+ at91sam7_info->num_nvmbits = 2;
+ at91sam7_info->nvmbits = (status>>8)&0x03;
+ bank->base = 0x100000;
+ bank->bus_width = 4;
+ if (bank->size==0x80000) /* AT91SAM7S512 */
+ {
+ at91sam7_info->target_name = "AT91SAM7S512";
+ at91sam7_info->num_planes = 2;
+ if (at91sam7_info->num_planes != bank->num_sectors)
+ WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
+ at91sam7_info->num_lockbits = 2*16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 2*16*64;
+ }
+ if (bank->size==0x40000) /* AT91SAM7S256 */
+ {
+ at91sam7_info->target_name = "AT91SAM7S256";
+ at91sam7_info->num_lockbits = 16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 16*64;
+ }
+ if (bank->size==0x20000) /* AT91SAM7S128 */
+ {
+ at91sam7_info->target_name = "AT91SAM7S128";
+ at91sam7_info->num_lockbits = 8;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 8*64;
+ }
+ if (bank->size==0x10000) /* AT91SAM7S64 */
+ {
+ at91sam7_info->target_name = "AT91SAM7S64";
+ at91sam7_info->num_lockbits = 16;
+ at91sam7_info->pagesize = 128;
+ at91sam7_info->pages_in_lockregion = 32;
+ at91sam7_info->num_pages = 16*32;
+ }
+ if (bank->size==0x08000) /* AT91SAM7S321/32 */
+ {
+ at91sam7_info->target_name = "AT91SAM7S321/32";
+ at91sam7_info->num_lockbits = 8;
+ at91sam7_info->pagesize = 128;
+ at91sam7_info->pages_in_lockregion = 32;
+ at91sam7_info->num_pages = 8*32;
+ }
+
+ return ERROR_OK;
+ }
+
+ if (at91sam7_info->cidr_arch == 0x71 )
+ {
+ at91sam7_info->num_nvmbits = 3;
+ at91sam7_info->nvmbits = (status>>8)&0x07;
+ bank->base = 0x100000;
+ bank->bus_width = 4;
+ if (bank->size==0x80000) /* AT91SAM7XC512 */
+ {
+ at91sam7_info->target_name = "AT91SAM7XC512";
+ at91sam7_info->num_planes = 2;
+ if (at91sam7_info->num_planes != bank->num_sectors)
+ WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
+ at91sam7_info->num_lockbits = 2*16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 2*16*64;
+ }
+ if (bank->size==0x40000) /* AT91SAM7XC256 */
+ {
+ at91sam7_info->target_name = "AT91SAM7XC256";
+ at91sam7_info->num_lockbits = 16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 16*64;
+ }
+ if (bank->size==0x20000) /* AT91SAM7XC128 */
+ {
+ at91sam7_info->target_name = "AT91SAM7XC128";
+ at91sam7_info->num_lockbits = 8;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 8*64;
+ }
+
+ return ERROR_OK;
+ }
+
+ if (at91sam7_info->cidr_arch == 0x72 )
+ {
+ at91sam7_info->num_nvmbits = 3;
+ at91sam7_info->nvmbits = (status>>8)&0x07;
+ bank->base = 0x100000;
+ bank->bus_width = 4;
+ if (bank->size==0x80000) /* AT91SAM7SE512 */
+ {
+ at91sam7_info->target_name = "AT91SAM7SE512";
+ at91sam7_info->num_planes = 2;
+ if (at91sam7_info->num_planes != bank->num_sectors)
+ WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
+ at91sam7_info->num_lockbits = 32;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 32*64;
+ }
+ if (bank->size==0x40000)
+ {
+ at91sam7_info->target_name = "AT91SAM7SE256";
+ at91sam7_info->num_lockbits = 16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 16*64;
+ }
+ if (bank->size==0x08000)
+ {
+ at91sam7_info->target_name = "AT91SAM7SE32";
+ at91sam7_info->num_lockbits = 8;
+ at91sam7_info->pagesize = 128;
+ at91sam7_info->pages_in_lockregion = 32;
+ at91sam7_info->num_pages = 8*32;
+ }
+
+ return ERROR_OK;
+ }
+
+ if (at91sam7_info->cidr_arch == 0x75 )
+ {
+ at91sam7_info->num_nvmbits = 3;
+ at91sam7_info->nvmbits = (status>>8)&0x07;
+ bank->base = 0x100000;
+ bank->bus_width = 4;
+ if (bank->size==0x80000) /* AT91SAM7X512 */
+ {
+ at91sam7_info->target_name = "AT91SAM7X512";
+ at91sam7_info->num_planes = 2;
+ if (at91sam7_info->num_planes != bank->num_sectors)
+ WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
+ at91sam7_info->num_lockbits = 32;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 2*16*64;
+ DEBUG("Support for AT91SAM7X512 is experimental in this version!");
+ }
+ if (bank->size==0x40000) /* AT91SAM7X256 */
+ {
+ at91sam7_info->target_name = "AT91SAM7X256";
+ at91sam7_info->num_lockbits = 16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 16*64;
+ }
+ if (bank->size==0x20000) /* AT91SAM7X128 */
+ {
+ at91sam7_info->target_name = "AT91SAM7X128";
+ at91sam7_info->num_lockbits = 8;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 8*64;
+ }
+
+ return ERROR_OK;
+ }
+
+ if (at91sam7_info->cidr_arch == 0x60 )
+ {
+ at91sam7_info->num_nvmbits = 3;
+ at91sam7_info->nvmbits = (status>>8)&0x07;
+ bank->base = 0x100000;
+ bank->bus_width = 4;
+
+ if (bank->size == 0x40000) /* AT91SAM7A3 */
+ {
+ at91sam7_info->target_name = "AT91SAM7A3";
+ at91sam7_info->num_lockbits = 16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 16;
+ at91sam7_info->num_pages = 16*64;
+ }
+ return ERROR_OK;
+ }
+
+ WARNING("at91sam7 flash only tested for AT91SAM7Sxx series");
+
+ return ERROR_OK;
+}
+
+int at91sam7_erase_check(struct flash_bank_s *bank)
+{
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+
+ if (!at91sam7_info->working_area_size)
+ {
+ }
+ else
+ {
+ }
+
+ return ERROR_OK;
+}
+
+int at91sam7_protect_check(struct flash_bank_s *bank)
+{
+ u32 status;
+ int flashplane;
+
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+
+ if (at91sam7_info->cidr == 0)
+ {
+ at91sam7_read_part_info(bank);
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ for (flashplane=0;flashplane<at91sam7_info->num_planes;flashplane++)
+ {
+ status = at91sam7_get_flash_status(bank, flashplane);
+ at91sam7_info->lockbits[flashplane] = (status >> 16);
+ }
+
+ return ERROR_OK;
+}
+
+/* flash_bank at91sam7 0 0 0 0 <target#>
+ */
+int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+{
+ at91sam7_flash_bank_t *at91sam7_info;
+ int i;
+
+ if (argc < 6)
+ {
+ WARNING("incomplete flash_bank at91sam7 configuration");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ at91sam7_info = malloc(sizeof(at91sam7_flash_bank_t));
+ bank->driver_priv = at91sam7_info;
+ at91sam7_info->probed = 0;
+
+ /* part wasn't probed for info yet */
+ at91sam7_info->cidr = 0;
+ for (i=0;i<4;i++)
+ at91sam7_info->flashmode[i]=0;
+
+ return ERROR_OK;
+}
+
+int at91sam7_erase(struct flash_bank_s *bank, int first, int last)
+{
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ u8 flashplane;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ at91sam7_read_part_info(bank);
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if ((first < 0) || (last < first) || (last >= bank->num_sectors))
+ {
+ if ((first == 0) && (last == (at91sam7_info->num_lockbits-1)))
+ {
+ WARNING("Sector numbers based on lockbit count, probably a deprecated script");
+ last = bank->num_sectors-1;
+ }
+ else return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ /* Configure the flash controller timing */
+ at91sam7_read_clock_info(bank);
+ for (flashplane = first; flashplane<=last; flashplane++)
+ {
+ /* Configure the flash controller timing */
+ at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH);
+ if (at91sam7_flash_command(bank, flashplane, EA, 0) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+ return ERROR_OK;
+
+}
+
+int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last)
+{
+ u32 cmd, pagen;
+ u8 flashplane;
+ int lockregion;
+
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if ((first < 0) || (last < first) || (last >= at91sam7_info->num_lockbits))
+ {
+ return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ at91sam7_read_part_info(bank);
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ at91sam7_read_clock_info(bank);
+
+ for (lockregion=first;lockregion<=last;lockregion++)
+ {
+ pagen = lockregion*at91sam7_info->pages_in_lockregion;
+ flashplane = (pagen>>10)&0x03;
+ /* Configure the flash controller timing */
+ at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_NVBITS);
+
+ if (set)
+ cmd = SLB;
+ else
+ cmd = CLB;
+
+ if (at91sam7_flash_command(bank, flashplane, cmd, pagen) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ at91sam7_protect_check(bank);
+
+ return ERROR_OK;
+}
+
+
+int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 dst_min_alignment, wcount, bytes_remaining = count;
+ u32 first_page, last_page, pagen, buffer_pos;
+ u8 flashplane;
+
+ if (at91sam7_info->cidr == 0)
+ {
+ at91sam7_read_part_info(bank);
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (offset + count > bank->size)
+ return ERROR_FLASH_DST_OUT_OF_BANK;
+
+ dst_min_alignment = at91sam7_info->pagesize;
+
+ if (offset % dst_min_alignment)
+ {
+ WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ if (at91sam7_info->cidr_arch == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ first_page = offset/dst_min_alignment;
+ last_page = CEIL(offset + count, dst_min_alignment);
+
+ DEBUG("first_page: %i, last_page: %i, count %i", first_page, last_page, count);
+
+ at91sam7_read_clock_info(bank);
+
+ for (pagen=first_page; pagen<last_page; pagen++)
+ {
+ if (bytes_remaining<dst_min_alignment)
+ count = bytes_remaining;
+ else
+ count = dst_min_alignment;
+ bytes_remaining -= count;
+
+ /* Write one block to the PageWriteBuffer */
+ buffer_pos = (pagen-first_page)*dst_min_alignment;
+ wcount = CEIL(count,4);
+ target->type->write_memory(target, bank->base+pagen*dst_min_alignment, 4, wcount, buffer+buffer_pos);
+ flashplane = (pagen>>10)&0x3;
+
+ /* Configure the flash controller timing */
+ at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH);
+ /* Send Write Page command to Flash Controller */
+ if (at91sam7_flash_command(bank, flashplane, WP, pagen) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ DEBUG("Write flash plane:%i page number:%i", flashplane, pagen);
+ }
+
+ return ERROR_OK;
+}
+
+
+int at91sam7_probe(struct flash_bank_s *bank)
+{
+ /* we can't probe on an at91sam7
+ * if this is an at91sam7, it has the configured flash
+ */
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ at91sam7_info->probed = 0;
+
+ if (at91sam7_info->cidr == 0)
+ {
+ at91sam7_read_part_info(bank);
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ at91sam7_info->probed = 1;
+
+ return ERROR_OK;
+}
+
+
+int at91sam7_auto_probe(struct flash_bank_s *bank)
+{
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ if (at91sam7_info->probed)
+ return ERROR_OK;
+ return at91sam7_probe(bank);
+}
+
+int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size)
+{
+ int printed, flashplane;
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+
+ at91sam7_read_part_info(bank);
+
+ if (at91sam7_info->cidr == 0)
+ {
+ printed = snprintf(buf, buf_size, "Cannot identify target as an AT91SAM\n");
+ buf += printed;
+ buf_size -= printed;
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ printed = snprintf(buf, buf_size, "\nat91sam7 information: Chip is %s\n",at91sam7_info->target_name);
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "cidr: 0x%8.8x, arch: 0x%4.4x, eproc: %s, version:0x%3.3x, flashsize: 0x%8.8x\n",
+ at91sam7_info->cidr, at91sam7_info->cidr_arch, EPROC[at91sam7_info->cidr_eproc], at91sam7_info->cidr_version, bank->size);
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "master clock(estimated): %ikHz \n", at91sam7_info->mck_freq / 1000);
+ buf += printed;
+ buf_size -= printed;
+
+ if (at91sam7_info->num_planes>1) {
+ printed = snprintf(buf, buf_size, "flashplanes: %i, pagesize: %i, lock regions: %i, pages in lock region: %i \n",
+ at91sam7_info->num_planes, at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->num_pages/at91sam7_info->num_lockbits);
+ buf += printed;
+ buf_size -= printed;
+ for (flashplane=0; flashplane<at91sam7_info->num_planes; flashplane++)
+ {
+ printed = snprintf(buf, buf_size, "lockbits[%i]: 0x%4.4x, ", flashplane, at91sam7_info->lockbits[flashplane]);
+ buf += printed;
+ buf_size -= printed;
+ }
+ }
+ else
+ if (at91sam7_info->num_lockbits>0) {
+ printed = snprintf(buf, buf_size, "pagesize: %i, lockbits: %i 0x%4.4x, pages in lock region: %i \n",
+ at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->lockbits[0], at91sam7_info->num_pages/at91sam7_info->num_lockbits);
+ buf += printed;
+ buf_size -= printed;
+ }
+
+ printed = snprintf(buf, buf_size, "securitybit: %i, nvmbits: 0x%1.1x\n", at91sam7_info->securitybit, at91sam7_info->nvmbits);
+ buf += printed;
+ buf_size -= printed;
+
+ return ERROR_OK;
+}
+
+/*
+* On AT91SAM7S: When the gpnvm bits are set with
+* > at91sam7 gpnvm 0 bitnr set
+* the changes are not visible in the flash controller status register MC_FSR
+* until the processor has been reset.
+* On the Olimex board this requires a power cycle.
+* Note that the AT91SAM7S has the following errata (doc6175.pdf sec 14.1.3):
+* The maximum number of write/erase cycles for Non Volatile Memory bits is 100. This includes
+* Lock Bits (LOCKx), General Purpose NVM bits (GPNVMx) and the Security Bit.
+*/
+int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ int bit;
+ u8 flashcmd;
+ u32 status;
+ char *value;
+ at91sam7_flash_bank_t *at91sam7_info;
+
+ if (argc < 3)
+ {
+ command_print(cmd_ctx, "at91sam7 gpnvm <num> <bit> <set|clear>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ bit = atoi(args[1]);
+ value = args[2];
+
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ at91sam7_info = bank->driver_priv;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ at91sam7_read_part_info(bank);
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if ((bit<0) || (at91sam7_info->num_nvmbits <= bit))
+ {
+ command_print(cmd_ctx, "gpnvm bit '#%s' is out of bounds for target %s", args[1],at91sam7_info->target_name);
+ return ERROR_OK;
+ }
+
+ if (strcmp(value, "set") == 0)
+ {
+ flashcmd = SGPB;
+ }
+ else if (strcmp(value, "clear") == 0)
+ {
+ flashcmd = CGPB;
+ }
+ else
+ {
+ command_print(cmd_ctx, "usage: at91sam7 gpnvm <num> <bit> <set|clear>");
+ return ERROR_OK;
+ }
+
+ /* Configure the flash controller timing */
+ at91sam7_read_clock_info(bank);
+ at91sam7_set_flash_mode(bank, 0, FMR_TIMING_NVBITS);
+
+ if (at91sam7_flash_command(bank, 0, flashcmd, (u16)(bit)) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ status = at91sam7_get_flash_status(bank, 0);
+ DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value 0x%x, status 0x%x \n",flashcmd,bit,status);
+ at91sam7_info->nvmbits = (status>>8)&((1<<at91sam7_info->num_nvmbits)-1);
+
+ return ERROR_OK;
+}
|