aboutsummaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/openocd.texi18
1 files changed, 18 insertions, 0 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 48297abf..1749034d 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2321,6 +2321,24 @@ This is a write-once setting.
Segger jlink USB adapter
@c command: jlink caps
@c dumps jlink capabilities
+@c command: jlink config
+@c access J-Link configurationif no argument this will dump the config
+@c command: jlink config kickstart [val]
+@c set Kickstart power on JTAG-pin 19.
+@c command: jlink config mac_address [ff:ff:ff:ff:ff:ff]
+@c set the MAC Address
+@c command: jlink config ip [A.B.C.D[/E] [F.G.H.I]]
+@c set the ip address of the J-Link Pro, "
+@c where A.B.C.D is the ip,
+@c E the bit of the subnet mask
+@c F.G.H.I the subnet mask
+@c command: jlink config reset
+@c reset the current config
+@c command: jlink config save
+@c save the current config
+@c command: jlink config usb_address [0x00 to 0x03 or 0xff]
+@c set the USB-Address,
+@c This will change the product id
@c command: jlink info
@c dumps status
@c command: jlink hw_jtag (2|3)