diff options
Diffstat (limited to 'doc')
-rw-r--r-- | doc/openocd.texi | 17 |
1 files changed, 15 insertions, 2 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 983ce3ca..dcb843ac 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -5827,8 +5827,8 @@ The @var{num} parameter is a value shown by @command{flash banks}. @end deffn @deffn {Flash Driver} stm32f2x -All members of the STM32F2 and STM32F4 microcontroller families from ST Microelectronics -include internal flash and use ARM Cortex-M3/M4 cores. +All members of the STM32F2, STM32F4 and STM32F7 microcontroller families from ST Microelectronics +include internal flash and use ARM Cortex-M3/M4/M7 cores. The driver automatically recognizes a number of these chips using the chip identification register, and autoconfigures itself. @@ -5851,6 +5851,19 @@ The @var{num} parameter is a value shown by @command{flash banks}. Unlocks the entire stm32 device. The @var{num} parameter is a value shown by @command{flash banks}. @end deffn + +@deffn Command {stm32f2x options_read} num +Reads and displays user options and (where implemented) boot_addr0 and boot_addr1. +The @var{num} parameter is a value shown by @command{flash banks}. +@end deffn + +@deffn Command {stm32f2x options_write} num user_options boot_addr0 boot_addr1 +Writes user options and (where implemented) boot_addr0 and boot_addr1 in raw format. +Warning: The meaning of the various bits depends on the device, always check datasheet! +The @var{num} parameter is a value shown by @command{flash banks}, user_options a +12 bit value, consisting of bits 31-28 and 7-0 of FLASH_OPTCR, boot_addr0 and boot_addr1 +two halfwords (of FLASH_OPTCR1). +@end deffn @end deffn @deffn {Flash Driver} stm32lx |